Yeatman Lab Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
Page describing how we analyze cortical thickness with freesurfer

====Setting up Freesurfer and MATLAB====
First make sure that you have the correct lines in your .bashrc file to run freesurfer:
<code>export FREESURFER_HOME=/usr/local/freesurfer
source $FREESURFER_HOME/SetUpFreeSurfer.sh > /dev/null
export SUBJECTS_DIR=/mnt/diskArray/projects/freesurfer</code>
Next make sure that you have the right tool boxes in your matlab search path. This should be done through your startup.m file
<code>addpath(genpath('~/git/yeatmanlab'));</code>

====Create a T1 weighted nifti image for the subject====
Step 1: In a terminal, convert the PAR/REC files to nifti images. You may not need to do this if you have already gone through the [[anatomy|Anatomy Pipeline]]
<code>cd /mnt/diskArray/projects/MRI/[subid]
parrec2nii -c -b *.PAR</code>
Step 2: In MATLAB compute the root mean squared (RMS) image. Once again this might have already been done in the [[anatomy|Anatomy Pipeline]] so you can re-use that RMS image
<code>T1path = 'Path to t1 weighted image';
T1path = mri_rms(T1path); % Root mean squared image</code>

====Freesurfer Segmentation====
Freesurfer is a useful tool for segmenting a T1-weighted image and building a cortical mesh. To segment the subject's T1-weighted image using freesurfer from the command line type:
<code>recon-all -i /home/projects/MRI/[subjid]/[YYYYMMDD]/[subjid]_WIP_MEMP_VBM_SENSE_13_1_MSE.nii.gz -subjid [subid] -all</code>
The MATLAB script ''parallel_recon.m'' has been written to (with slight adjustments in order to specify file input and output) automate and parallelize the process, which typically takes 6-10 hours per file. It is also recommended that the process be executed on multiple servers in order to further divide the work.

====Longitudinal Analysis====
===Pre-processing===
Following the segmentation of the T1-weighted image, two further pre-processing steps are necessary to proceed with longitudinal analysis of the data. Firstly, an unbiased template must be created for each subject, taking into account all time-points/sessions. Secondly, each time-point must be processed again using these templates in order to standardize subject data across time-points.

The command to create the unbiased template is:
<code>recon-all -base [output file name] -tp [time-point 1 file] -tp [time-point 2 file] ... -tp [time-point n file] -all</code>
Next, the command to process each time-point using this template is:
<code>recon-all -long [template file] [time_point file] -all</code>
The ''recon-all -base'' command will take about as long as the original FreeSurfer segmentation, however each iteration of the ''recon-all -long'' command will take approximately half the time. Using helper functions, the ''parallel_recon.m'' script will also generate and execute these commands.

There are several different options for longitudinal data analysis, each which provides unique and useful information about the data and how subjects change over time.

===Qdec Files===
A first step of several different forms of longitudinal analysis is the generation of a qdec file. A qdec file is a text file, which serves as a consolidation of subjects of interest, along with any other relevant measures or covariates. The file is used to extract, organize, and analyze data for subjects/time-points listed. For a longitudinal qdec file, the components should be organized in the following manner:
  - The first column should list subjects' relevant time-points, with the column header **fsid** listed in the first row.
  - The second column, **fsid-base**, should list the base template for each subject/time-point. 
  - Unless otherwise specified, the third column will be considered the time variable. Therefore, it is encouraged to default to that organization in order to avoid unexpected confounds.
  - The following columns can contain any relevant data, including behavioral measures, which can be used for further analysis, e.g. correlational
Because for some analyses data is numerically sorted using information from the qdec file, one version of the file should represent subjects' time-points and base templates strictly numerically. However, an original file should be kept which lists subjects time-points and base templates so they accurately correspond with a file name, which contains the data for that/those time-point(s).

===Pre-processing pt. 2===
In order to complete the following analyses, there are two more steps of collecting and processign data. The two commands used are ''mris_preproc'' and ''mri_surf2surf''. For example: <code>mris_preproc --qdec-long long.qdec.table.dat --target fsaverage --hemi lh --meas thickness --out lh.thickness.stack.mgh</code>
Followed by:
<code>mri_surf2surf --hemi lh --s fsaverage --sval lh.thickness.stack.mgh --tval lh.thickness.stack.fwhm10.mgh --fwhm-trg 10 --cortex --noreshape</code>
Further documentation for both [[https://surfer.nmr.mgh.harvard.edu/fswiki/mris_preproc|mris_preproc]] and [[https://surfer.nmr.mgh.harvard.edu/fswiki/mri_surf2surf|mri_surf2surf]] can be found at these links.

The output of ''mri_surf2surf'' along with the numerical qdec file can then be used as inputs for the function ''long_prepare_LME.m''. The output of this function is an array which contains (among other things) data for the relevant subjects and a data matrix containing information from the qdec file. Outputs of this function will be used for the following analyses.

===Correlational Analysis===

A whole brain correlational analysis has the potential to illuminate the relationship between behavioral measures and the anatomy of the brain. The analysis subsequently provides an assortment of regions of interest whose structural change over time can be investigated. 

Using the outputs of ''long_prepare_LME'', the function ''make_correlation_map.m'' will create a .mgh file which can be mapped onto the cortical surface in order to visualize regions correlated with a given covariate. This file can later be used in order to extract clusters (a process which is described under **ROI Analysis**) with which the function ''corrplot_ROIs.m'' calculates the correlation value and its signficance and plots the data to a graph. An optional output of this function is a 3D matrix containing information about the ROIs which can be used for plotting the data longitudinally (using ''long_mtx_2_longplot.m'') or analyzed using the linear mixed effects model (described below).

===Linear Mixed Effects Modelling===
The linear mixed effects model is a useful and robust method of statistical analysis. In order to use this model, the 3D data matrix output of ''corrplot_ROIs.m'' must be reformatted to a 2D matrix using the function ''consol_long_mtx.m''. Once the 2D matrix is created, it can be used in the function ''lme_long_fitandplot.m'' which will calculate the significance and plot the change of the brain anatomy over time. 

The linear mixed effects model can be used to statistically analyze ROIs found through other forms of analysis. However, it is also possible to use the model to identify regions of interest, based on the significance of their change over time. The function ''lme_whole_brain_analysis'' uses information from ''long_prepare_LME.m'' and analyzes the longitudinal change in each vertex of the brain across time. The output is a collection of significance files which can be mapped onto the cortical surface for visualization in freeview or used for ROI analysis. 

//Note//: As there are tens of thousands of vertices to be analyzed, the whole brain analysis will take anywhere from 4-12 hours depending on the number of time-points as well as the complexity of the hypothesis.

===ROI Analysis===
As described above, analysis of ROIs provides a lot of useful information, such as change in those regions over time or correlations with behavioral measures. The freesurfer command ''mri_surfcluster'' takes an mgh file, among other inputs, and outputs several files containing useful information. The command can either be run in the command line or in MATLAB using the function ''do_mri_surfcluster.m''. Further documentation on ''mri_surfclsuter'' can be found [[https://surfer.nmr.mgh.harvard.edu/fswiki/mri_surfcluster|here]].

In order to use functions such as ''lme_long_fitandplot.m'', the outputs of these files must be processed and reformatted into matrices. Regarding the analyses described above, ''corrplot_ROIs.m'' will reformat information for correlational analysis and ''cluster_2_lme_longmtx'' should be used to process the clusters extracted from the output of ''lme_whole_brain_analysis.m''.
Yeatman Lab Wiki

User Tools

Site Tools

Page Tools
