Shop Tools Safety Quiz

Band Saw Quiz

1) Which of the following is important to do before turning on the saw? a) Check blade tension b) Turn dust collector on and open vent c) Close wheel guards d) All of the above

2) Which way should the teeth of the blade face on a downward stroke? a) Up b) Down c) Left d) Right

3) The upper blade guard should be set how high above the wood to be cut? a) 1/2 inch b) 3/8 inch c) 1/4 inch d) 1/8 inch

4) When backing out of a long cut: a) Back the wood out while the blade is running b) Check the blade for proper blade tension c) Turn off the machine, then back out d) Turn the wood.

5) When cutting small or oddly shaped pieces, what should you NOT use to hold the wood in place: a) Jig b) Push stick c) Your fingers d) V-fixture

6) Never cut with your fingers: a) Supporting the wood b) To the side of the blade c) Behind the blade d) n front of the blade

7) Your hands should be at least how far away from the blade when cutting: a) 1/4 inch b) 1/2 inch c) 1 inch d) 2 inch

8) The correct blade for a project should be: a) Sharp b) In good condition c) The largest possible with coarse teeth d) All of the above

9) If the blade breaks, you should: a) Panic b) Open the case and fix it yourself c) Run from the machine to find the teacher d) Turn off the power and send a partner to get the teacher

10) Before making adjustments, you should: a) Turn off the power and wait for the blade to stop completely b) Wait for the blade to slow c) Make sure the saw is plugged in d) Keep the blade coasting