Hazards:
Isopropanol is very flammable. Be sure your hands are washed of any spilled isopropanol prior to lighting!!
Chemicals and Solutions:
Isopropanol
Water
Materials:
100 mL graduated cylinder
Large glass sheet for covering a crystallizing dish
Tongs
Bunsen burner and matches
Two cloth towels (you can cut up an old lab coat)
Three large crystallizing dishes
Procedure:
Into one crystallizing dish place a mixture of 50 mL isopropanol and 50 mL water. Immerse a towel into the mixture and thoroughly wet the towel. Squeeze out the excess liquid. Dry off your hands and light the bunsen burner. Holding the damp towel with tongs, bring the towel close to the flame. A flame will surround the towel without burning it. As the flame subsides, snuff it out with a quick jerk. Repeat the experiment on a second towel but instead of using a mixture of water and alcohol, immerse the cloth in straight isopropanol. This time the cloth will catch fire. (If you cannot snuff out the flame with a quick jerk place the burning cloth into a third dry dish and cover it with a glass sheet.)
Hint:
Discussion:
The combustion reaction is
2C3H7OH + 9O2----> 6CO2 + 8H2O
The heat of reaction for this equation is -1987kJ/mole. Most of this energy is lost to the surrounding air. The remaining energy can cause the combustion of the towel. The function of the water is to absorb some of the energy of the combustion reaction. The energy is used to heat the water to its boiling point and to vaporize it. The energy diverted by the water is sufficient to keep the towel from burning
As an example, the energy available from the combustion of 50g of isopropanol is 1659kJ. Heating 50 g of water from 20oC to 100oC requires 17kJ, and vaporizing the water requires 113kJ, making a total of 130kJ absorbed by these processes. Clearly then, most of the heat produced by the combustion of the alcohol is lost to the surrounding air but the energy required by the water processes are significant enough to keep the towel from burning.
To schedule a demonstration, please send an email to the demonstration lab.
Contact:
Eric Camp
Lecture Demonstration Technician
Bagley Hall 171
(206) 543-1606