Impact

The Center for Nanotechnology at the University of Washington serves as a catalyst for interdisciplinary research in nanoscale science and technology. From  biological materials to nanoelectronics and from photovoltaics to drug delivery, our community of researchers develops new materials, devices, tools and knowledge to address major societal problems. Below is a list of publications by CNT-affiliated faculty for the 2011-2012 period. Publications for other years can be found here.

1. “A 3-µW CMOS glucose sensor for wireless contact-lens tear glucose monitoring”, Y. Liao, H. Yao, A. Lingley, B. Parivz and B. Otis, IEEE J. Solid-State Circuits, 47: 335-344, (2012).
2. “A Chitin Nanofiber Ink for Airbrushing, Replica Molding, and Microcontact Printing of Self-assembled Macro-, Micro-, and Nanostructures”, C. Zhong, A. Kapetanovic, et al. Advanced Materials 23(41): 4776 (2011).
3.  “A compact and highly fluorescent orange-emitting polymer dot for specific subcellular imaging”, F.M. Ye, C. Wu, Y. Jin, M. Wang ,Y. Chan, J. Yu, W. Sun, S. Hayden and D.T. Chiu, Chem. Commun., 48, 1778-1780, (2012).
4. “A contact lens with embedded sensor for monitoring tear glucose level”, H. Yao, A. Shum, M. Cowan, I. Lähdesmäki and B. Parviz, Biosens. Bioelectron., 26: 3090-3096, (2011).
5. “A contact lens with an integrated lactate sensor”, N. Thomas, I. Lahdesmaki, B. A. Parviz, Sensors and Actuators B: Chemical 162, 1 (2012).
6. “A contact lens with integrated telecommunication circuit and sensors for wireless and continuous tear glucose monitoring”, H. Yao, Y. Liao, A. Lingley, A. Afanasiev, I. Lähdesmäki, B. Otis and B. Parviz, J. Micromech. Microeng., 22: 075007, (2012).
7. “A low cost point-of-care viscous sample preparation device for molecular diagnosis in the developing world; an example of microfluidic origami”, A.V. Govindarajan, S. Ramachandran, G.D. Vigil, P. Yager, K.F. Böhringer, Lab-on-a-Chip, 12(1):174-181, 2012, DOI 10.1039/C1LC20622B (2012).
8. “A microfluidic system to study cytoadhesion of Plasmodium falciparum infected erythrocytes to primary brain microvascularendothelial cells”, T. Herricks, K. B. Seydel, et al. Lab on a Chip, 11(17): 2994-3000, (2011).
9. “A polysaccharide bioprotonic field-effect transistor”, C. Zhong, Y. X. Deng, et al. Nature Communications 2, 476 (2011).
10. “Achieving excellent electro-optic activity and thermal stability in poled polymers through an expeditious crosslinking process”, Z. W. Shi, J. D. Luo, et al. Journal of Materials Chemistry 22(3): 951-959 (2012).
11. “All-Organic Photopatterned One Diode-One Resistor Cell Array for Advanced Organic Nonvolatile Memory Applications”, T. W. Kim, D. F. Zeigler, et al. Advanced Materials 24(6): 828 (2012).
12. “Amphiphilic Self-Assembled “Polymeric Drugs”: Morphology, Properties, and Biological Behavior of Nanoparticles”, M. L. Lopez-Donaire, E. M. Sussman, et al. Biomacromolecules 13(3): 624-635 Feb (2012).
13. “An electro-enzymatic flexible molecular lactate sensor”, N. Thomas, I. Lahdesmaki, B. A. Parviz, in Proc. IEEE NEMS, 2012, pp. 398-402 Mar (2012).
14. “An Organophosphonate Strategy for Functionalizing Silicon Photonic Biosensors”, J. Shang, F. Cheng, M. Dubey, et al. Langmuir 28 (6), 3338-3344 (2012).
15. “Antimicrobial effects of nanofiber poly(caprolactone) tissue scaffolds releasing rifampicin”, T. T. Ruckh, R. A. Oldinski, et al. Journal of Materials Science-Materials in Medicine 23(6): 1411-1420 (2012).
16. “Aqueous, Protein-Driven Synthesis of Transition Metal-Doped ZnS Immuno-Quantum Dots”, W. B. Zhou, and F. Baneyx, Acs Nano 5(10): 8013-8018 (2011).
17. “Arsenic- and cadmium-induced toxicogenomic response in mouse embryos undergoing neurulation”, J. F. Robinson, X. Z. Yu, et al. Toxicology and Applied Pharmacology 250(2): 117-129 (2012).
18. “Band bending and surface defects in beta-Ga2O3”, Lovejoy, T. C.; Chen, Renyu; Zheng, X.; et al., Appl. Phys. Lett. 100 (18), 181602 (2012).
19. “Bandwidth enhancement of waveguide-coupled photodetectors with inductive gain peaking”, M. Gould, T. Baehr-Jones, et al. Optics Express 20(7): 7101-7111. (Mar 2012).
20. “Benzobisthiazole-Based Donor-Acceptor Copolymer Semiconductors for Photovoltaic Cells and Highly Stable Field-Effect Transistors”, E. Ahmed, S. Subramaniyan, F. S. Kim, et al. Macromolecules 44 (18), 7207-7219 (2011).
21. “Bioactive Materials for Regenerative Medicine: Zeolite-Hydroxyapatite Bone Mimetic Coatings”, R. S. Bedi, G. Chow, et al. Advanced Engineering Materials 14(3): 200-206.
22. “Biological materials science: An emerging art”, J. A. Nychka, J. J. Kruzic, et al. Materials Science & Engineering C-Materials for Biological Applications 31(4): 713-715 (2011).
23. “Boosting Infrared Light Harvesting by Molecular Functionalization of Metal Oxide/Polymer Interfaces in Efficient Hybrid Solar Cells”, G. Grancini, R. S. S. Kumar, et al. Advanced Functional Materials 22(10): 2160-2166 (2012).
24.  “Brightly photoluminescent phosphor materials based on silicon quantum dots with oxide shell passivation”, C.C. Tu, Q.F. Zhang, L.Y. Lin, and G.Z. Cao, Optics Express, 20(S1): A69-A74, Jan. 2, (2012).
25. “Built-In Potential in Conjugated Polymer Diodes with Changing Anode Work Function: Interfacial States and Deviation from the Schottky-Mott Limit”, B. A. MacLeod, N. E. Horwitz, et al. Journal of Physical Chemistry Letters 3(9): 1202-1207. (2012).
26. “Capturing a Fusion Intermediate of Influenza Hemagglutinin with a Cholesterol-conjugated Peptide, a New Antiviral Strategy for Influenza Virus”, K. K. Lee, A. Pessi, et al. Journal of Biological Chemistry 286(49): 42141-42149 (2011).
27. “Carbohydrate-Dependent Uptake of Glycopolymers by Macrophages and the Implications for Targeted Drug Delivery”, E. H. Song, M. Manganiello, et al. Glycobiology 21(11): 1483-1483 (2011).
28. “Characterization of phospholipid hydroperoxide glutathione metabolizing peroxidase (gpx4) isoforms in Coho salmon olfactory and liver tissues and their modulation by cadmium”, L. Wang, S. M. Harris, et al. Aquatic Toxicology 114: 134-141 (2012).
29. “Characterization of poly(Sodium Styrene Sulfonate) Thin Films Grafted from Functionalized Titanium Surfaces”, G. Zorn, J.E. Baio, T. Weidner, V. Migonney and D.G. Castner, Langmuir, 27, 13104-13112, (2011).
30. “Charge transport properties in ZnO-based photoelecttrodes for dye-sensitized solar cells with different heat-treatment”, K. Park, Q. F. Zhang, et al. Abstracts of Papers of the American Chemical Society 241 (2011).
31. “Charge Transport Properties of ZnO Nanorod Aggregate Photoelectrodes for DSCs”, K. Park, J. T. Xi, et al. Journal of Physical Chemistry C 115(43): 20992-20999 (2011).
32. “Chemically Doped and Cross-linked Hole-Transporting Materials as an Efficient Anode Buffer Layer for Polymer Solar Cells”, Y.Sun, S. C. Chien, et al. Chemistry of Materials 23(22): 5006-5015 (2011).
33. “Combining physicochemical models of electrodeposition with simulated annealing to optimize orchestrated structure evolution” S. Abbasi, S. Kitayaporn, M.J. Siedlik, D.T. Schwartz, K.F. Böhringer, Nanotechnology, 23, 305301 (2012).
34. “Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)”, N. W. Hrabe, P. Heinl, et al. Journal of Biomedical Materials Research Part B-Applied Biomaterials 99B(2), 313-320 (2011).
35. “Conjugated polymers based on C, Si and N-bridged dithiophene and thienopyrroledione units: synthesis, field-effect transistors and bulk heterojunction polymer solar cells”, Y. Zhang, J. Y. Zou, et al. Journal of Materials Chemistry 21(11): 3895-3902 (2011).
36. “Controlled Hierarchical Architecture in Surface-initiated Zwitterionic Polymer Brushes with Structurally Regulated Functionalities”, C. J. Huang, N. D. Brault, et al. Advanced Materials 24(14), 1834-1837 (2012).
37. “Controlling morphology and phase of pyrite FeS2 hierarchical particles via the combination of structure-direction and chelating agents”, L.Zhu, B. Richardson, et al. Crystengcomm 14(12): 4188-4195 (2012).
38. “Controlling Self-Assembly of Engineered Peptides on Graphite by Rational Mutation”, C. R. So, Y. Hayamizu, et al. Acs Nano 6(2): 1648-1656 (2012).
39. “Controlling the Surface Chemistry of Graphite by Engineered Self-Assembled Peptides”, D.Khatayevich, C. R. So, et al. Langmuir 28(23), 8589-8593 (2012).
40. “Controlling Vertical Morphology within the Active Layer of Organic Photovoltaics Using Poly(3-hexylthiophene) Nanowires and Phenyl-C-61-butyric Acid Methyl Ester”, A. H. Rice, R. Giridharagopal, et al. Acs Nano 5(4), 3132-3140 (2011).
41. “Cytotoxicity and physicochemical properties of hafnium oxide nanoparticles”, J. A. Field, A. Luna-Velasco, S. A. Boitano, et al., Chemosphere 84 (10), 1401-1407(2011).
42. “Decoupling Substrate Stiffness, Spread Area, and Micropost Density: A Close Spatial Relationship Between Traction Forces and Focal Adhesions”, S.J. Han, L.H. Ting, K.S. Bielawski, M.L. Rodriguez, N.J. Sniadecki, Biophysical Journal, (2012).
43. “Design and Tailoring of a Three-Dimensional TiO2-Graphene-Carbon Nanotube Nanocomposite for Fast Lithium Storage”, L. F. Shen, X. G. Zhang, et al. Journal of Physical Chemistry Letters 2(24): 3096-3101 (2011).
44. “Design of New Electron Acceptor Materials for Organic Photovoltaics: Synthesis, Electron Transport, Photophysics, and Photovoltaic Properties of Oligothiophene-Functionalized Naphthalene Diimides”, E. Ahmed, G. Ren, F. S. Kim, E. C. Hollenbeck, and S. A. Jenekhe, Chem. Mater. 23 (20), 4563-4577 (2011).
45. “Diblock copolymers with tunable pH transitions for gene delivery”, M. J. Manganiello, C. Cheng, et al. Biomaterials 33(7): 2301-2309 (2012).
46.  “Direct interaction of ligand-receptor pairs specifying stomatal patterning”, J. S. Lee, T. Kuroha, et al. Genes & Development 26(2), 126-136 (2012).
47. “Direct release of synthetic antiferromagnetic nanoparticles fabricated by defect-free thermal imprinting”, W. Zhang and K. M. Krishnan, J. Appl. Phys. 111, 07B509 (2012).
48. “Directed Drop Transport Rectified from Orthogonal Vibrations via a Flat Wetting Barrier Ratchet”, T. A. Duncombe, J. Parsons, K. F. Böhringer, Langmuir, accepted for publication (2012).
49. “Distribution of Functionalized Gold Nanoparticles between Water and Lipid Bilayers as Model Cell Membranes”, W. C. Hou, B. Y. Moghadam, et al. Environmental Science & Technology 46(3), 1869-1876 (2012).
50. “Dry Film Refractive Index as an Important Parameter for Ultra-Low Fouling Surface Coatings”, N. D. Brault, H. S. Sundaram, et al. Biomacromolecules 13(3): 589-593. (2012).
51. “Dynamics of Cilia-Based Microfluidic Devices”, J. Kongthon, J. H. Chung, J. J. Riley, and S. Devasia, Journal of Dynamic Systems Measurement and Control-Transactions of The ASME, 133 (5), 051012, (2011).
52. “Earth-Abundant Element Photovoltaics Directly from Soluble Precursors with High Yield Using a Non-Toxic Solvent”, W. Ki, and H. W. Hillhouse Advanced Energy Materials 1(5): 732-735 (2011).
53. “Effect of Annealing Temperature on TiO2-ZnO Core-Shell Aggregate Photoelectrodes of Dye-Sensitized Solar Cells”, K. Park, Q. F. Zhang, et al. Journal of Physical Chemistry C 115(11): 4927-4934 (2011).
54. “Effect of Film Thickness on the Antifouling Performance of Poly(hydroxy-functional methacrylates) Grafted Surfaces”, C. Zhao, L. Y. Li, et al. Langmuir 27(8): 4906-4913 (2011).
55. “Effect of Silanization Film Thickness in Soft Lithography of Nanoscale Features”, L.H. Ting, S. Feghhi, S.J. Han, M.L. Rodriguez, N.J. Sniadecki, Journal of Nanotechnology in Medicine and Biology, 2(4):041006, (2011).
56. “Effective interfacial layer to enhance efficiency of polymer solar cells via solution-processed fullerene-surfactants”, C. Z. Li, C. C. Chueh, et al. Journal of Materials Chemistry 22(17), 8574-8578 (2012).
57. “Effects of Side Chains on Thiazolothiazole-Based Copolymer Semiconductors for High Performance Solar Cells”, S. Subramaniyan, H. Xin, F. S. Kim, et al., Advanced Functional Materials 21 (5), 854-860 (2011).
58. “Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells”, Z. Q. Liang, Q. F. Zhang, et al. Advanced Functional Materials 22(10), 2194-2201 (2012).
59. “Efficient Phthalimide Copolymer-Based Bulk Heterojunction Solar Cells: How the Processing Additive Influences Nanoscale Morphology and Photovoltaic Properties”, H. Xin, X. G. Guo, G. Ren, M. D. Watson, and S. A. Jenekhe, Adv. Energy Mater. 2 (5), 575-582 (2012).
60. “Efficient Poling of Electro-Optic Polymers in Thin Films and Silicon Slot Waveguides by Detachable Pyroelectric Crystals”, S. Huang, J. D. Luo, et al. Advanced Materials 24(10): OP42-OP47 (2012).
61. “Efficient Strip to Strip-Loaded Slot Mode Converter in Silicon-on-Insulator”, Y. Liu, T. Baehr-Jones, et al. Ieee Photonics Technology Letters 23(20), 3096-3111 (2011).
62. “Elastic instabilities in a microfluidic cross-slot flow of wormlike micellar solutions”, N. Dubash, P. Cheung, and A.Q. Shen, Soft Matter, 8(21), 5847-5856 (2012).
63. “Electric field-induced concentration and capture of DNA onto microtips”, D. Kalyanasundaram, S. Inoue, J.H. Kim, H. B. Lee, Z. Kawanata, W.-H. Yeo, G.A. Cangelosi, K. Oh, D. Gao, K.H. Lee, and J.H. Chung, Microfluidics and Nanofluidics, on-line publication, (2012).
64. “Electric-field sensors utilizing coupling between a D-fiber and an electro-optic polymer slab”, S. Chadderdon, R. Gibson, et al. Applied Optics 50(20), 3505-3512 (2011).
65. “Electrical detection of biomolecular adsorption on sprayed graphene sheets”, T. R. Page, Y. Hayamizu, et al. Biosensors & Bioelectronics 33(1), 304-308 (2012).
66. “Electrical, Mechanical and Structural Characterization of Self-Assembly in Poly(3-hexylthiophene) Organogel Networks”, G.M. Newbloom, K.M. Weigandt, D.C. Pozzo, Macromolecues, 2012, 45 (8), pp 3452-3462 (2012).
67. “Electro-optic polymer spatial light modulator based on a Fabry-Perot interferometer configuration”, C. Greenlee, J. Luo, et al. Optics Express 19(13): 12750-12758 (2012).
68. “Electro-optic thin films of organic nonlinear optic molecules aligned through vacuum deposition”, W. W. Sun, Z. H. Wang, et al. Optics Express 19(12), 11189-11195 (2011).
69. “Electron beam lithography writing strategies for low loss, high confinement silicon optical waveguides”, R. J. Bojko, J. Li, L. He, T. Baehr-Jones, M. Hochberg, and Y. Aida, Journal of Vacuum Science & Technology B 29(6), 06F309 (2011).
70. “Electron-Transfer Processes in Zinc Phthalocyanine Phosphonic Acid Monolayers on ITO: Characterization of Orientation and Charge-Transfer Kinetics by Waveguide Spectroelectrochemistry”, H. C. Lin, N. W. Polaske, et al. Journal of Physical Chemistry Letters 3(9), 1154-1158.(2012).
71. “Engineered Escherichia coli Silver-Binding Periplasmic Protein That Promotes Silver Tolerance”, R. H. Sedlak, M. Hnilova, et al. Applied and Environmental Microbiology 78(7), 2289-2296 (2012).
72. “Engineering biomaterials to integrate and heal: The biocompatibility paradigm shifts”, J. D. Bryers, C. M. Giachelli, B. D. Ratner, Biotechnology and Bioengineering 109 (8), 1898-1911 (2012).
73. “Engineering Monovalent Quantum Dot-Antibody Bioconjugates with a Hybrid Gel System”, H. Y. Liu, and X. H. Gao, Bioconjugate Chemistry 22(3), 510-517 (2011).
74. “Enhanced bioreaction efficiency of a microfluidic mixer toward high-throughput and low-cost bioassays”, H. B. Lee, K. Oh, W. H. Yeo, T. R. Lee, Y. S. Chang, J. B. Choi, K.H. Lee, J. Kramlich, J. J. Riley, Y. J. Kim, and J. H. Chung, Microfluidics and Nanofluidics, 12 (1-4), 143-156, (2012).
75. “Enhanced carrier mobility and electrical stability of n-channel polymer thin film transistors by use of low-k dielectric buffer layer”, F. S. Kim, D. K. Hwang, B. Kippelen, et al., Appl. Phys. Lett. 17, 173303 (2011).
76. “Enhanced Open Circuit Voltage and Efficiency of Donor-Acceptor Copolymer Solar Cells by Using Indene-C60 Bisadduct”, H. Xin, S. Subramaniyan, T. W. Kwon, et al. Chemistry of Materials 24 (11), 1995-2001 (2012).
77. “Enhanced Open-Circuit Voltage in High Performance Polymer/Fullerene Bulk-Heterojunction Solar Cells by Cathode Modification with a C60 Surfactant”, K. M. O'Malley, C. Z. Li, et al. Advanced Energy Materials 2(1), 82-86 (2012).
78. “Enhancing displacement of lead-zirconate-titanate (PZT) thin-film membrane microactuators via a dual electrode design”, C. Luo, G. Z. Cao, et al. Sensors and Actuators a-Physical 173(1), 190-196 (2012).
79. “Exploring spatial resolution in high-sensitivity nanogap quantum dot photodetectors”, L. Huang, M. Strathman, and L.Y. Lin, Optics Letters, 37(15), 3144-3146, (2012).
80. “Exploring the Surface Sensitivity of ToF-SIMS by Measuring the Implantation and Sampling Depths of Bin and C60 Ions in Organic Films”, S. Muramoto, J. Brison and D.G. Castner, Analytical Chemistry, 84, 365-372, (2012).
81. “Fabrication of hierarchical hybrid structures using bio-enabled layer-by-layer self-assembly”, M. Hnilova, B. T. Karaca, et al. Biotechnology and Bioengineering 109(5): 1120-1130 (2012).
82. “Flexible microfluidic normal force sensor skin for tactile feedback”, R. D. P. Wong, J. D. Posner, et al. Sensors and Actuators a-Physical 179: 62-69 (2012).
83. “Flow Mechanotransduction Regulates Traction Forces, Intercellular Forces, and Adherens Junctions”, L.H. Ting, J.R. Jahn, J.I. Jung, B.R. Shuman, S. Feghhi, S.J. Han, M.L. Rodriguez, N.J. Sniadecki, American Journal of Physiology – Heart and Circulatory Physiology, 302, H2220-H2229, (2012).
84. “Fully visible-light-harvesting conjugated polymers with pendant donor-pi-acceptor chromophores for photovoltaic applications”, C. H. Duan, X. W. Hu, et al. Solar Energy Materials and Solar Cells 97, 50-58 (2012)..
85. “Functional contact lenses for remote health monitoring in developing countries”, N. Thomas, I. Lahdesmaki, A. Lingley, Y. Liao, J. Pandey, A. Afanasiev, B. Otis, T. Shen, B. A. Parviz, in Proc. GHTC, 20111, 212-217 (2011).
86. “Functional fullerenes for organic photovoltaics”, C. Z. Li, H. L. Yip, et al. Journal of Materials Chemistry 22(10), 4161-4177 (2012).
87.  “Generation of Functionalized and Robust Semiconducting Polymer Dots with Polyelectrolytes”, Y. Jin, F.M. Ye, C. Wu, Y. Chan and D.T. Chiu, Chem. Commun., 48, 3161-3163, (2012).
88. “Graphene-based aerogels”, M. A. Worsley, T. Y. Olson, et al. Abstracts of Papers of the American Chemical Society 241, 27-31 (2011).
89. “Guiding the morphogenesis of dissociated newborn mouse retinal cells and hES cell-derived retinal cells by soft lithography-patterned microchannel PLGA scaffolds”, A. C. McUsic, D. A. Lamba, et al. Biomaterials 33(5), 1396-1405 (2012).
90. “Heating Effect of Thermally Significant Blood Vessels in Perfused Tumor Tissue During Cryosurgery”, Z. F. Liu, G. Zhao, et al. Journal of Mechanics in Medicine and Biology 12(1) (2012).
91. “Heme oxygenase expression as a biomarker of exposure to amphiphilic polymer-coated CdSe/ZnS quantum dots”, L.A. McConnachie, C.C. White, D. Botta, M.E. Zadworny, D.P. Cox, R.P. Beyer, X. Hu, D.L. Eaton, X. Gao, T.J. Kavanagh, Nanotoxicology, (2012).
92. “High-mobility low-bandgap conjugated copolymers based on indacenodithiophene and thiadiazolo[3,4-c]pyridine units for thin film transistor and photovoltaic applications”, Y. Sun, S. C. Chien, et al. Journal of Materials Chemistry 21(35), 13247-13255 (2011).
93. “High-performance multilayered phosphorescent OLEDs by solution-processed commercial electron-transport materials”, T. Earmme and S. A. Jenekhe, J. Mater. Chem. 22 (11), 4660-4668 (2012).
94. “Highly efficient indacenodithiophene-based polymeric solar cells in conventional and inverted device configurations”, K. S. Chen, Y. Zhang, et al. Organic Electronics 12(5), 794-801 (2011).
95. “Highly Sensitive Detection of Exocytotic Dopamine Release Using a Gold-Nanoparticle-Network Microelectrode”, K. L. Adams, B. K. Jena, et al. Analytical Chemistry 83(3), 920-927 (2011).
96. “HPMA-oligolysine copolymers for gene delivery: Optimization of peptide length and polymer molecular weight”, R. N. Johnson, D. S. H. Chu, et al. Journal of Controlled Release 155(2), 303-311 (2011).
97.  “Hybrid Semiconducting Polymer Dot–Quantum Dot with Narrow-Band Emission, Near-Infrared Fluorescence, and High Brightness”, Y.H. Chan, F.M. Ye, M. E. Gallina, X. Zhang, Y. Jin, I-C Wu, and D. T. Chiu, J. Amer. Chem. Soc. 134, 7309-7312, (2012).
98. “Hydrodynamic Tweezers: Impact of Design Geometry on Flow and Microparticle Trapping”, V. H. Lieu, T. A. House, et al. Analytical Chemistry 84(4), 1963-1968 (2012).
99. “Identifying Individual Cell Types in Heterogeneous Cultures Using Secondary Ion Mass Spectrometry Imaging with C-60 Etching and Multivariate Analysis”, C. A. Barnes, J. Brison, M. Robinson, et al. Analytical Chemistry 84 (2), 893-900 (2012).
100. “Immunosensor towards Low-Cost, Rapid Screening of Tuberculosis”, J.H. Kim, W.H. Yeo, Z. Shu, W.H. Yeo, S. Soelberg, S. Inoue, D. Kalyanasundaram, J. Ludwig, C. Furlong, J. Riley, K. Weigel, G. A. Cangelosi, K. Oh, K.H. Lee, D. Gao, and J.H. Chung, Lab on a chip, 12 (8), 1437-1440, (2012).
101. “Impact of Hydrophilic Surfaces on Interfacial Water Dynamics Probed with NMR Spectroscopy”, H. Yoo, R. Paranji, et al. Journal of Physical Chemistry Letters 2(6): 532-536 (2011).
102.  “Importance of Having Low-Density Functional Groups for Generating High-Performance Semiconducting Polymer Dots”, X. Zhang, J. Yu, C. Wu, Y. Jin, Y. Rong, F.M. Ye, and D. T. Chiu, ACS Nano, 6, 5429-5439, (2012).
103. “Improved thin film morphology and bulk-heterojunction solar cell performance through systematic tuning of the surface energy of conjugated polymers”, Y. Sun, S. C. Chien, et al. Journal of Materials Chemistry 22(12), 5587-5595 (2012).
104. “In situ pressure measurement within deformable rectangular polydimethylsiloxane microfluidic devices”, P. Cheung, K. Toda-Peters, A.Q. Shen, Biomicrofluidics, 2012, 6(2), 026501 (2012).
105. “In Vitro Labeling of Hydroxyapatite Minerals by an Engineered Protein”, E. Yuca, A. Y. Karatas, et al. Biotechnology and Bioengineering 108(5): 1021-1030 (2011).
106. “In-situ Crosslinking and n-Doping of Semiconducting Polymers and Their Application as Efficient Electron-Transporting Materials in Inverted Polymer Solar Cells”, N. Cho, H. L. Yip, et al. Advanced Energy Materials 1(6): 1148-1153 (2011).
107. “Increased open circuit voltage in fluorinated benzothiadiazole-based alternating conjugated polymers”, Y. Zhang, S. C. Chien, et al. Chemical Communications 47(39): 11026-11028 (2011).
108. “Incorporation, valence state, and electronic structure of Mn and Cr in bulk single crystal beta-Ga2O3”, Lovejoy, T. C.; Chen, Renyu; Yitamben, E. N.; et al., J. Appl. Phys. 111 (12), 123706 (2012).
109. “Indacenodithiophene and Quinoxaline-Based Conjugated Polymers for Highly Efficient Polymer Solar Cells”, Y. Zhang, J. Y. Zou, et al. Chemistry of Materials 23(9): 2289-2291 (2011).
110. “Influence of the Shape of Nanostructured Metal Surfaces on Adsorption of Single Peptide Molecules in Aqueous Solution”, J. Feng, J. M. Slocik, et al. Small 8(7): 1049-1059 (2012).
111. “Insight into On-Wafer Crystallization of Pure-Silica-Zeolite Films through Nutrient Replenishment”, C. M. Lew, Y. Liu, et al. Langmuir 27(7): 3283-3285 (Apr 2011).
112. “Insights into scanning probe high-field chemistry of diphenylgermane”, S. E. Vasko, W. J. Jiang, et al. Physical Chemistry Chemical Physics 13(11): 4842-4845 (2011).
113. “Kr and 4He Adsorption on Individual Suspended Single-Walled Carbon Nanotubes”, H.C. Lee, O.E. Vilches, Z. Wang, E. Fredrickson, P. Morse, R. Roy, B. Dzyubenko, and D.H. Cobden, J. Low Temp. Phys., (2012).
114. “Laser Investigation of the Non-Uniformity of Fluorescent Species in Dental Enamel”, S. U.Tran, J. S. Ridge, L. Y. Nelson, and E. J. Seibel, Submitted to Proc. Of SPIE 2013.
115. “Laying out ground rules for protein-aided nanofabrication: ZnO synthesis at 70 degrees C as a case study”, S. Kitayaporn, W. B. Zhou, et al. Biotechnology and Bioengineering 109(8): 1912-1918 (2012).
116. “Li4Ti5O12 Nanoparticles Embedded in a Mesoporous Carbon Matrix as a Superior Anode Material for High Rate Lithium Ion Batteries”, L. F. Shen, X. G. Zhang, et al. Advanced Energy Materials 2(6): 691-698 (2012).
117. “Light Transmission and Surface-Enhanced Raman Scattering of Quasi-3D Plasmonic Nanostructure Arrays with Deep and Shallow Fabry-Perot Nanocavities”, J. J. Xu, P. Guan, et al. Journal of Physical Chemistry C 115(22): 10996-11002 (2011).
118. “Linearity of silicon ring modulators for analog optical links”, A. Ayazi, T. Baehr-Jones, et al. Optics Express 20(12): 13115-13122 (2012).
119. “Local micelle concentration fluctuations in microfluidic flows and its relation to a flow-induced structured phase (FISP)”, P. Cheung, N. Dubash, A.Q. Shen, Soft Matter, 8(7):2304-2309 (2012).
120. “Low-loss asymmetric strip-loaded slot waveguides in silicon-on-insulator”, R. Ding, T. Baehr-Jones, et al. Applied Physics Letters 98(23) (2011).
121. “Luminescence Saturation via Mn2+-Exciton Cross Relaxation in Colloidal Doped Semiconductor Nanocrystals”, L. R. Bradshaw, A. Hauser, E. J. McLaurin, D. R Gamelin, J. Phys. Chem. C, 116, 9300-9310 (2012).
122.  “Macromolecular design for biodegradable polymers and scaffolds to control healing and regeneration”, B. D. Ratner, and A. Galperin, Abstracts of Papers of the American Chemical Society 241, abs. 13-PMSE (2011).
123. “Macrophage polarization: An opportunity for improved outcomes in and regenerative medicine”, B. N. Brown, B. D. Ratner, S. B. Goodman, et al. Biomaterials 33 (15), 3792-3802 (2012).
124. “Manipulating Sticky and Non-Sticky Properties in a Single Material”, Z. Q. Cao, N. Brault, et al. Angewandte Chemie-International Edition 50(27): 6102-6104 (2011).
125. “Melt electrospinning of biodegradable polyurethane scaffolds”, A. Karchin, F. I. Simonovsky, B. D. Ratner, et al., Acta Biomaterialia 7 (9), 3277-3284 (2011).
126. “Methanotrophic communities of Saanich Inlet: A microcosm perspective”, L. M. Sauter, E. Latypova, et al. Systematic and Applied Microbiology 35(3): 198-203 (2012).
127. “Microelectrode array biosensor for studying carbohydrate-mediated interactions”, J. W. Chamberlain, K. Maurer, et al. Biosensors & Bioelectronics 34(1): 253-260 (2012).
128. “Microencapsulated 3-dimensional sensor for the measurement of oxygen in single isolated pancreatic islets”, W. Chen, M. Lisowski, G. Khalil, I.R. Sweet, A.Q. Shen, PLoS ONE, 7(3), e33070 (2012).
129. “Microfabricated thermal conductivity sensor: a high resolution tool for quantitative thermal property measurement of biomaterials and solutions”, X. M. Liang, W. P. Ding, et al. Biomedical Microdevices 13(5): 923-928 (2011).
130. “Modification of nonlinear optical dyes for dye sensitized solar cells: a new use for a familiar acceptor”, D. G. Patel, N. M. Bastianon, et al. Journal of Materials Chemistry 21(12): 4242-4250 (2011).
131. “Moving Droplets by Vibration: The Texture Ratchet”, T.A. Duncombe, E. Yegân Erdem, A. Shastry, R. Baskaran, K.F. Böhringer, Advanced Materials, 24(12):1545-1550, March (2012).
132. “Mulitfunctional Nanoparticles for Molecular Imaging”, P. Zrazhevskiy, and X. H. Gao, In Vitro Cellular & Developmental Biology-Animal 48: 2-2. (2012).
133. “Multifunctional and degradable zwitterionic nanogels for targeted delivery, enhanced MR imaging, reduction-sensitive drug release, and renal clearance”, L. Zhang, H. Xue, et al. Biomaterials 32(20): 4604-4608 (2011).
134. “Multifunctional magnetic-plasmonic nanoparticles for fast concentration and sensitive detection of bacteria using SERS”, L. Zhang, J. J. Xu, et al. Biosensors & Bioelectronics 31(1): 130-136 (2012).
135. “Multifunctional Nanocapsules for Simultaneous Encapsulation of Hydrophilic and Hydrophobic Compounds and On-Demand Release”, S. H. Hu, S. Y. Chen, et al. Acs Nano 6(3): 2558-2565 (2012).
136. “Multifunctional nanoprobe to enhance the utility of optical based imaging techniques”, Y. R. Jung, G. Y. Guan, et al. Journal of Biomedical Optics 17(1), 018015 (2012).
137. “Multilayer coating of gold nanorods for combined stability and biocompatibility”, X. G. Hu, and X. H. Gao Physical Chemistry Chemical Physics 13(21): 10028-10035 (2011).
138. “Multiplexed inkjet functionalization of silicon photonic biosensors”, J. T. Kirk, G. E. Fridley, et al. Lab on a Chip 11(7): 1372-1377 (2011).
139. “Multiscale Framework for Biomedical Simulation from Molecular Dynamics to Continuum Mechanics”, W. K. Liu, T.R. Lee, A. M. Kopacz, H. Kim, W. Stroberg, H. B. Man, D. Ho, M.K. Kim, J.H. Chung, P. Decuzzi, Journal of the Serbian Society for Computational Mechanics, 5 (2), 61-80, (2011).
140. “Multivalent artificial opsonin for the recognition and phagocytosis of Gram-positive bacteria by human phagocytes”, K. N. Katzenmeyer, J. D. Bryers, Biomaterials 32(16): 4042-4051 (2011).
141. “Myths and rumours of silicon photonics”, T. Baehr-Jones, T. Pinguet, et al. Nature Photonics 6(4): 206-208 (2012).
142. “Nano-Engineering Lattice Dimensionality for a Soft Matter Organic Functional Material”, S. J. Benight, D. B. Knorr, et al. Advanced Materials 24(24): 3263-3268 (2012).
143. “Nanoscale Clustering of Carbohydrate Thiols in Mixed Self-Assembled Monolayers on Gold”, F. Tantakitti, J. Burk-Rafel, F. Cheng, R. Egnatchik, T. Owen, M. Hoffman, D.N. Weiss, and D.M. Ratner, Langmuir, 2012, 28 (17), pp 6950–6959 (2012).
144. “Nanoscale Sensor Analysis using Immersed Molecular Electrokinetic Finite Element Method”, A. Kopacz, W. H. Yeo, J. H. Chung, W. K. Liu, Nanoscale, 4, 5189-5194. (2012).
145. “Nanosheet-structured LiV3O8 with high capacity and excellent stability for high energy lithium batteries”, A. Q. Pan, J. G. Zhang, et al. Journal of Materials Chemistry 21(27): 10077-10084 (2011).
146. “Nanowires of oligothiophene-functionalized naphthalene diimides: self assembly, morphology, and all-nanowire bulk heterojunction solar cells”, G. Ren, E. Ahmed, S. A. Jenekhe, Journal of Materials Chemistry, (2012).
147. “Naphthalene Diimide-Based Polymer Semiconductors: Synthesis, Structure-Property Correlations, and n-Channel and Ambipolar Field-Effect Transistors”, X. Guo, F. S. Kim, M. J. Seger, et al. Chemistry of Materials 24 (8), 1434-1442 (2012).
148. “Near-Complete Suppression of Surface Recombination in Solar Photoelectrolysis by “Co-Pi” Catalyst-Modified W:BiVO4”, D. K. Zhong, S. Choi, D. R. Gamelin, Journal of the Americal Chemical Society 133 (45),: 18370-18377 (2011).
149. “New effective process to fabricate fast switching and high contrast electrochromic device based on viologen and Prussian blue/antimony tin oxide nano-composites with dark colored state”, Y. Rong, S. Kim, et al. Electrochimica Acta 56(17): 6230-6236 (2011).
150. “New Poly(arylene vinylene)s Based on Diketopyrrolopyrrole for Ambipolar Transistors”, P. T. Wu, F. S. Kim, S. A. Jenekhe, 20, 4618-4624 (2011).
151.  “New Solution-Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs”, E. Ahmed, T. Earmme, S. A. Jenekhe, Advanced Functional Materials 21 (20), 3889-3899 (2011).
152. “New Thiazolothiazole Copolymer Semiconductors for Highly Efficient Solar Cells”, S. Subramaniyan, H. Xin, F. S. Kim, et al., Macromolecules 44 (16), 6245-6248 (2011).
153. “New Thienothiadiazole-Based Conjugated Copolymers for Electronics and Optoelectronics”, Y. J. Hwang, F. S. Kim, H. Xin, et al. 45 (9), 3732-3739 (2012).
154. “NEXAFS Analysis of Individual Phenylalanine Orientations in Statherin Bound to Hydroxyapatite”, T. Weidner, M. Dubey, N.F. Breen, J. Ash, J. E. Baio, C. Jaye, D.A. Fischer, G.P. Drobny and D.G. Castner, J. American Chemical Society, 134, 8750-8753, (2012).
155. “Non-Fullerene Acceptor-Based Bulk Heterojunction Polymer Solar Cells: Engineering the Nanomorphology via Processing Additives”, G. Ren, E. Ahmed, and S. A. Jenekhe, Adv. Energy Mater. 1 (5), 946-953 (2011).
156. “Novel methylotrophic isolates from lake sediment, description of Methylotenera versatilis sp nov and emended description of the genus Methylotenera”, M. G. Kalyuzhnaya, D. A. C. Beck, et al. International Journal of Systematic and Evolutionary Microbiology 62: 106-111 (2012).
157. “Opportunities for Integrating Toxicogenomic Approaches for Regulatory Decision Making”, E. M. Faustman, X. Yu, et al. Environmental and Molecular Mutagenesis 52: S16-S16 (2011).
158. “Optical Detection of Protein in Complex Media with Plasmonic Nanoparticle Dimers”, J. I. L. Chen, H. Durkee, et al. Small 7(14): 1993-1997 (2011).
159. “Optical detection of target molecule induced aggregation of nanoparticles by means of high-Q resonators”, J. Witzens and M. Hochberg, Optics Express 19(8): 7034-7061 (2011).
160. “Optical Transmission Stability of Hybrid Sol-Gel Silica/Electrooptic Polymer Waveguide Modulators”, Y. Enami, J. Hong, et al. Ieee Photonics Technology Letters 23(20) (2011).
161. “Orbital pathways for Mn2+-carrier sp-d exchange in diluted magnetic semiconductor quantum dots”, R. Beaulac, Y. Feng, J. W. May, et al., Phys. Rev. B 84 (19), 195324 (2011).
162. “Orchestrated structure evolution: modeling growth-regulated nanomanufacturing”, S. Abbasi, S. Kitayaporn, D.T. Schwartz, K.F. Böhringer, Nanotechnology, 22(16):165303, (2011).
163. “Organic electro-optic thin films by simultaneous vacuum deposition and laser-assisted poling”, Z. H. Wang, W. W. Sun, et al. Optics Letters 36(15): 2853-2855 (Aug 2011).
164. “Peptide-directed co-assembly of nanoprobes on multimaterial patterned solid surfaces”, M. Hnilova, C. R. So, et al. Soft Matter 8(16): 4327-4334 (2012).
165. “Photoinduced Charge Transfer and Polaron Dynamics in Polymer and Hybrid Photovoltaic Thin Films: Organic vs Inorganic Acceptors”, K. M. Noone, S. Subramaniyan, et al. Journal of Physical Chemistry C 115(49): 24403-24410 (2011).
166. “Photolithographically fabricated low-loss asymmetric silicon slot waveguides”, A. Spott, T. Baehr-Jones, et al. Optics Express 19(11): 10950-10958 (2011).
167. “Photoluminescence Brightening via Electrochemical Trap Passivation in ZnSe and Mn2+-Doped ZnSe Quantum Dots”, A. L. Weaver, D. R. Gamelin, Journal of the Americal Chemical Society 134 (15), 6819-6825 (2012).
168. “Photoresist-based integration of enzyme functionality into MEMS”, N. Thomas, I. Lahdesmaki, B. A. Parviz, Microsystem Technologies, 17, 9 (2011).
169.  “Photoswitchable Oligonucleotide-Modified Gold Nanoparticles: Controlling Hybridization Stringency with Photon Dose”, Y. Q. Yan, J. I. L. Chen, et al. Nano Letters 12(5): 2530-2536 (2012).
170. “Pickering Emulsions Stabilized by Nanoparticle Surfactants”, K. Larson-Smith and D.C. Pozzo, Langmuir 28 (32), 11725-11732 (2012).
171. “Plasma Pencil Atmospheric Mass Spectrometry Detection of Positive Ions from Micronutrients Emitted from Surfaces”, M. J. Stein, E. Lo, D. G. Castner, et al. Analytical Chemistry 84 (3), 1572-1578 (2012).
172. “Plasmonic Enhancement of Raman Scattering from the Organic Solar Cell Material P3HT/PCBM by Triangular Silver Nanoprisms”, M. Stavytska-Barba, M. Salvador, et al. Journal of Physical Chemistry C 115(42): 20788-20794 (2011).
173. “Platelet and leukocyte adhesion to albumin binding self-assembled monolayers”, I. C. Goncalves, M. C. L. Martins, J. N. Barbosa, et al., Journal of Materials Science – Materials in Medicine 22 (9), 2053-2063 (2011).
174. “Poly(zwitterionic)protein conjugates offer increased stability without sacrificing binding affinity or bioactivity”, A. J. Keefe, and S. Y. Jiang Nature Chemistry 4(1): 60-64 (2012).
175. “Porous nanostructured V2O5 film electrode with excellent Li-ion intercalation properties”, Y. Y. Liu, J. G. Li, et al. Electrochemistry Communications 13(11): 1276-1279. (2011).
176. “Proangiogenic scaffolds as functional templates for cardiac tissue engineering”, L. R. Madden, D. J. Mortisen, et al. Proceedings of the National Academy of Sciences of the United States of America 107(34): 15211-15216 (2012).
177. “Probing the Orientation of Electrostatically Immobilized Protein G B1 by Time of Flight Secondary Ion Spectrometry, Sum Frequency Generation and Near-edge X-Ray Adsorption Fine Structure Spectroscopy”, J.E. Baio, T. Weidner, L. Baugh, L.J. Gamble, P.S. Stayton and D.G. Castner, Langmuir, 28, 2107-2112, (2012).
178. “Probing transconductance spatial variations in graphene nanoribbon field-effect transistors using scanning gate microscopy”, A. Soudi, G. Aivazian, et al. Applied Physics Letters 100(3), 033115 (2012).
179. “Quantifying the effect of pore size and surface treatment on epidermal incorporation into percutaneously implanted sphere-templated porous biomaterials in mice”, R. A. Underwood, M. L. Usui, G. Zhao, et al. Journal of Biomedical Materials Research A 98A (4), 499-508 (2011).
180. “Quantum Dot/Plasmonic Nanoparticle Metachromophores with Quantum Yields That Vary with Excitation Wavelength”, K. Munechika, Y. C. Chen, et al. Nano Letters 11(7): 2725-2730 (2011).
181. “Quantum-Enhanced Tunable Second-Order Optical Nonlinearity in Bilayer Graphene”, S. F. Wu, L. Mao, et al. Nano Letters 12(4): 2032-2036 (2012).
182. “RAFT-synthesized graft copolymers that enhance pH-dependent membrane destabilization and protein circulation times”, E. Crownover, C. L. Duvall, et al. Journal of Controlled Release 155(2): 167-174 (2011).
183. “Rapid Multitarget Immunomagnetic Separation through Programmable DNA Linker Displacement”, C. E. Probst, P. Zrazhevskiy, et al. Journal of the American Chemical Society 133(43): 17126-17129 (2011).
184. “Ratiometric temperature sensing with semiconducting polymer dots”, F.M. Ye, C. Wu, Y. Jin, Y.H. Chan, X. Zhang, D.T. Chiu, J. Amer. Chem. Soc. 133, 8146-8149, (2011).
185. “Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells”, H. L. Yip and A. K. Y. Jen, Energy & Environmental Science 5(3): 5994-6011 (2012).
186. “Red-shifted fluorescence of sound dental hard tissue”, L. Zhang, L. Y. Nelson, et al. Journal of Biomedical Optics 16(7), 071411 (2011).
187. “Reducible HPMA-co-oligolysine copolymers for nucleic acid delivery”, J.Shi, R. N. Johnson, et al. International Journal of Pharmaceutics 427(1): 113-122 (2012).
188. “Remote switching of cellular activity and cell signaling using light in conjunction with quantum dots”, K. Lugo, X.Y. Miao, F. Rieke, and L.Y. Lin, Biomedical Optics Express, 3(3), 447-454, (2012).
189. “Review: Electric Field Guided Assembly of One-dimensional Nanostructures for High Performance Sensors”, D. Brown, J.H. Kim, H.B. Lee, G. Fotouhi1, K.H. Lee, W. K. Liu, and J.H. Chung Sensors, 12 (5), 5725-5751, (2012).
190. “Sensitive and High-Throughput Isolation of Rare Cells from Peripheral Blood with Ensemble-Decision Aliquot Ranking”, P. G. Schiro, M. Zhao, J. S. Kuo, et al. Angewandte Chemie – International Edition 51 (19), 4618-4622 (2012).
191. “Sequence, Structure, and Function of Peptide Self-Assembled Monolayers”, A. K. Nowinski, F. Sun, et al. Journal of the American Chemical Society 134(13): 6000-6005 (2012).
192. “Serial and Parallel Si, Ge, and SiGe Direct-Write with Scanning Probes and Conducting Stamps”, S. E. Vasko, A. Kapetanovic, et al. Nano Letters 11(6): 2386-2389 (2011).
193. “Short hybrid polymer/sol-gel silica waveguide switches with high in-device electro-optic coefficient based on photostable chromophore”, Y. Enami, J. Luo, et al. Aip Advances 1(4).042137 (2011).
194. “Silicon-polymer hybrid slot waveguide ring-resonator modulator”, M. Gould, T. Baehr-Jones, et al. Optics Express 19(5): 3952-3961 (2011).
195. “Simple and Robust Approach for Passivating and Functionalizing Surfaces for Use in Complex Media”, Y. T. Li, A. J. Keefe, et al. Langmuir 28(25): 9707-9713 ( 2012).
196. “Simulation and Modeling of Self-Assembled Monolayers of Carboxylic Acid Thiols on Flat and Nanoparticle Gold Surfaces”, S. Techane, D.R. Baer and D.G. Castner, Analytical Chemistry, 83, 6704-6712, (2011).
197. “Simulation of the elastic properties of porous ceramics with realistic microstructure”, D. Jauffres, C. L. Martin, et al. Modelling and Simulation in Materials Science and Engineering 20(4), 045009 (2012).
198. “SINGLE CELL METHODS FOR METHANE OXIDATION ANALYSIS. Methods in Enzymology: Methods in Methane Metabolism, Vol 495, Pt B. A. C. Rosenzweig and S. W. Ragsdale”, M. C. Konopka, S. McQuaide, et al. San Diego, Elsevier Academic Press Inc: 149-166 (2011).
199. “Single step controlled protein patterning of GFP through genetically fused metal binding activity”, E. Yuca, M. Hnilova, et al. Current Opinion in Biotechnology 22: S120-S120 (2011).
200. “Single-step fabrication of patterned gold film array by an engineered multi-functional peptide”, M. Hnilova, D. Khatayevich, et al. Journal of Colloid and Interface Science 365(1): 97-102 (2012).
201. “siRNA-Aptamer Chimeras on Nanoparticles: Preserving Targeting Functionality for Effective Gene Silencing”, V. Bagalkot, and X. H. Gao, Acs Nano 5(10): 8131-8139 (2011).
202. ““Smart” delivery systems that open the intracellular target universe for biologic drugs”, P. S. Stayton, A. Covertine, et al. Abstracts of Papers of the American Chemical Society 241, 11-PMSE (2011).
203. “Spatially Modulating Interfacial Properties of Transparent Conductive Oxides: Patterning Work Function with Phosphonic Acid Self-Assembled Monolayers”, K. M. Knesting, P. J. Hotchkiss, et al. Advanced Materials 24(5): 642 (2012).
204. “Spectrally enhanced image resolution of tooth enamel surfaces”, L. Zhang, L. Y. Nelson, J. H. Berg, and E. J. Seibel, Proc. Of SPIE vol. 8208, 82080F (2012).
205. “Spectrally enhanced imaging of occlusal surfaces and artificial shallow enamel erosions with a scanning fiber endoscope”, L. Zhang, L. Y. Nelson, and E. J. Seibel, J. Biomed. Opt. 17(7), 076019 (2012).
206. “Spin-on Spintronics: Ultrafast Electron Spin Dynamics in ZnO and Zn1-xCoxO Sol-Gel Films”, K. M. Whitaker, M. Raskin, G. Kiliani, et al. NANO Lett. 11 (8), 3355-3360 (2011).
207.  “Stable Functionalization of Small Semiconducting Polymer Dots via Covalent Cross-Linking and Their Application for Specific Cellular Imaging”, J.B. Yu, C.F. Wu, X.J. Zhang, F.M. Ye, M.E. Gallina, Y. Rong, I.C. Wu, W. Sun, Y.H. Chan and D.T. Chiu, Adv. Mater. 24, 3498-3504, (2012).
208. “Structure and Property Development of Poly(3-hexylthiophene) Organogels Probed with Combined Rheology, Conductivity, and Small Angle Neutron Scattering”, G.M. Newbloom, K.M. Weigandt, D.C. Pozzo, Soft Matter, 2012, 8, pp 8854-8864 (2012)
209. “Sub-Volt Silicon-Organic Electro-optic Modulator With 500 MHz Bandwidth”, R. Ding, T. Baehr-Jones, et al. Journal of Lightwave Technology 29(8): 1112-1117 (2011).
210. “Substrate Stiffness Increases Twitch Power of Neonatal Cardiomyocytes in Correlation with Changes in Myofibril Structure and Intracellular Calcium”, A.G. Rodriguez, S.H. Han, M. Regnier, N.J. Sniadecki, N.J., Biophysical Journal, 101(11), 2455-64, (2011).
211. “Suppressing Surface Reconstruction of Superhydrophobic PDMS Using a Superhydrophilic Zwitterionic Polymer”, A. J. Keefe, N. D. Brault, et al. Biomacromolecules 13(5): 1683-1687 (2012).
212. “Suppression of background signal in magnetomotive photoacoustic imaging of magnetic microspheres mimicking targeted cells”, J. J. Xia, I. Pelivanov, et al. Journal of Biomedical Optics 17(6) (2012).
213. “Surface Acoustic Wave Nebulization Facilitates Lipid Mass Spectrometric Analysis”, S.H. Yoon, Y. Huang, J.S. Edgar, Y.S. Ting, S.R. Heron, Y. Kao, Y. Li, C.D. Masselon, R. Ernst, D.R. Goodlett, Anal Chem. (2012).
214. “Surface acoustic wave nebulization produces ions with lower internal energy than electrospray ionization”, Y. Huang, S.H. Yoon, S.R. Heron, C.D. Masselon, J.S. Edgar, F. Tureček, D.R. Goodlett, J Am Soc Mass Spectrom., 23(6):1062-70 (2012).
215. “Surface Characterization of Polythiophene:Fullerene Blends on Different Electrodes Using Near Edge X-ray Absorption Fine Structure”, A. F. Tillack, K. M. Noone, et al. Acs Applied Materials & Interfaces 3(3): 726-732 (2011).
216. “Surface-Initiated Synthesis of Poly(3-methylthiophene) from Indium Tin Oxide and its Electrochemical Properties”, N. Doubina, J. L. Jenkins, et al. Langmuir 28(3): 1900-1908 (2012).
217. “Synthesis and characterization of a nanocrystalline diamond aerogel”, P. J. Pauzauskie, J. C. Crowhurst, et al. Proceedings of the National Academy of Sciences of the United States of America 108(21): 8550-8553 (2011).
218. “Synthesis and Properties of Diarylamino-Substituted Linear and Dendritic Oligoquinolines for Organic Light-Emitting Diodes”, H. J. Lee, H. Xin, S. M. Park, et al., Bulletin of Korean Chemical Society 33 (5), 1627-1637 (2012).
219. “Synthesis, Characterization, Charge Transport, and Photovoltaic Properties of Dithienobenzoquinoxaline- and Dithienobenzopyridopyrazine-Based Conjugated Polymers”, Y. Zhang, J. Y. Zou, et al. Macromolecules 44(12): 4752-4758 (2011).
220. “Systematic Nanoengineering of Soft Matter Organic Electro-optic Materials”, L. R. Dalton, S. J. Benight, et al. Chemistry of Materials 23(3): 430-445 (2011).
221. “Tailoring Plasmonic Nanostructures for Optimal SERS Sensing of Small Molecules and Large Microorganisms”, J. J. Xu, L. Zhang, et al. Small 7(3): 371-376 (2011).
222. “The Biocompatibility Manifesto: Biocompatibility for the Twenty-first Century”, B. D. Ratner, Journal of Cardiovascular Translational Research 4 (5) (2011).
223. “The effects of dual doping on the thermoelectric properties of Ca3-xMxCo4-yCuyO9 (M = Na, La)”, Y. Ou, J. Peng, et al. Journal of Alloys and Compounds 526: 139-144. (Jun 2012).
224. “The transduction of Coxsackie and Adenovirus Receptor-negative cells and protection against neutralizing antibodies by HPMA-co-oligolysine copolymer-coated adenovirus”, C. H. K. Wang, L. W. Chan, et al. Biomaterials 32(35): 9536-9545 (2011).
225. “Theoretical Evaluation of Spin-Dependent Auger De-Excitation in Mn2+-Doped Semiconductor Nanocrystals”, B. Peng, W. Liang, M. A. White, et al. J. Phys. Chem. 116 (20) 11223-11231 (2012).
226. “Thermal-induced domain wall motion of tip-inverted micro/nanodomains in near-stoichiometric LiNbO3 crystals”, J. Appl. Phys. 110 (5), 052009 (2011).
227. “Thermal Tuning and Inversion of Excitonic Zeeman Splittings in Colloidal Doped CdSe Quantum Dots“, A. M. Schimpf, D. R. Gamelin, J. Phys. Chem. Lett. 3 (10), 1264-1268 (2012).
228. “Thickness-dependent evolution of magnetization reversal in micron-scale polycrystalline Fe rings”, Y.F. Hou and K.M. Krishnan, J. Appl. Phys. 111, 033910 (2012).
229. “Thickness-dependent magnetization reversal behavior of lithographic IrMn/Fe ring structures”, Y.F. Hou and K.M. Krishnan, J. Appl. Phys. 111, 07B905 (2012).
230. “Three-Dimensional Coherent Titania-Mesoporous Carbon Nanocomposite and Its Lithium-Ion Storage Properties”, L. F. Shen, E. Uchaker, et al. Acs Applied Materials & Interfaces 4(6): 2985-2992 (2012).
231. “Time-resolved electrostatic force microscopy on conjugated polymer blends”, D. S. Ginger, R. Giridharagopal, et al. Abstracts of Papers of the American Chemical Society 242, 59-PHYS (2011).
232. “ToF-SIMS Analysis of Adsorbed Proteins: Principal Component Analysis of the Primary Ion Species Effect on the Protein Fragmentation Patterns”, S. Muramoto, D.J. Graham, M.S. Wagner, T.G. Lee, D.W. Moon and D.G. Castner, Journal of Physical Chemistry C, 115, 24247-24255, (2011).
233. “Tracer design for magnetic particle imaging”, R.M. Ferguson, A.P. Khandhar, and K. M. Krishnan, J. Appl. Phys. 111,07B318 (2012).
234. “Tunable light-harvesting polymers containing embedded dipolar chromophores for polymer solar cell applications”, D. F. Zeigler, K. S. Chen, et al. Journal of Polymer Science Part a-Polymer Chemistry 50(7): 1362-1373 (2012).
235. “Tuning the Potentials of “Extra” Electrons in Colloidal n-Type ZnO Nanocrystals via Mg2+ Substitution”, A. W. Cohn, K. R. Kittilstved, D. R. Gamelin, Journal of the Americal Chemical Society 134 (18), 7937-7943 (2012).
236. “Ultrafast hot-carrier-dominated photocurrent in graphene”, D. Sun, G. Aivazian, A.M. Jones et al., Nature Nanotechnology 7(2), 114-118 (2012).
237. “Ultralow drive voltage silicon traveling-wave modulator”, T. Baehr-Jones, R. Ding, et al. Optics Express 20(11): 12014-12020 (2012).
238. “Uncertainty in biomass supply estimates: Lessons from a Yakama Nation case study”, J. J. Richardson, K. A. Spies, et al. Biomass & Bioenergy 35(8): 3698-3707 (2011).
239. “Understanding the effects of dielectric medium, substrate, and depth on electric fields and SERS of quasi-3D plasmonic nanostructures”, J. J. Xu, P. Kvasnicka, et al. Optics Express 19(21): 20493-20505 (2011).
240. “Utilization of plasmonic and photonic crystal nanostructures for enhanced micro- and nanoparticle manipulation”, C. S. Simmons, E.C. Knouf, M. Tewari, and L.Y. Lin, Journal of Visual Experiments, (55), e3390, DOI : 10.3791/3390, (2011).
241. “UV-Sensitive Self-Assembled Monolayer Photoresist for the Selective Deposition of Carbon Nanotubes”, J. A. Bardecker, A. Afzali, et al. Chemistry of Materials 24(11): 2017-2021.(2012).
242. “Visible-light photoconductivity of Zn1-xCoxO and its dependence on Co2+ concentration”, C. A. Johnson, A. Cohn, T. Kaspar, et al. Phys. Rev. B 84 (12), 125203 (2011).
243. “Voltammetric Behavior of Gold Nanotrench Electrodes”, J. P. Guerrette, S. J. Percival, et al. Langmuir 27(19): 12218-12225 (2011).
244. “Water-Soluble Dual-Emitting Nanocrystals for Ratiometric Optical Thermometry”, E. J. McLaurin, V. A. Vlaskin, D. R. Gamelin, Journal of the Americal Chemical Society 133 (38), 14978-14980 (2011).
245. “X-ray Photoelectron Spectroscopy Characterization of Gold Nanoparticles Functionalized with Amine-terminated Alkanethiols”, S.D. Techane, L.J. Gamble and D.G. Castner, Biointerphases, 6, 98-104, (2011).
246. “Zeolite as a wear-resistant coating”, G. Chow, R. S. Bedi, et al. Microporous and Mesoporous Materials 151: 346-351 (2012).
247. “Zwitterionic-based antibody arrays with high sensitivity and specificity for early cancer diagnostics using SPR imaging”, N. D. Brault, Q. M. Yu, et al. Abstracts of Papers of the American Chemical Society 240 (2012).