######################################################################			
#			
#       PARAMETER FILE FOR THE PHG SIMULATION
#
#       RUN NAME:	fastTest PETblock
#       CREATED:	Nov 2008
#       OWNER:		SimSET
#
#	This file gives parameters for a ring of BGO block detectors.
#	It is intended for use with the fastTest suite.
#
#	This parameter file uses the block detector module.
#			
######################################################################			

# RING OUTER DIMENSIONS			
# Provides the outer dimensions of the ring: all the blocks must fall entirely			
# within these boundaries.  The ring is bounded with a maximum and minimum			
# z value axially and by elliptical cylinders transaxially.  These bounds are not			
# in tomograph coordinates: the ring can shifted up or down axially or rotated			
# transaxially when placing it in the tomograph.			
REAL	ring_x_inner_radius		=	43.80000000000000						
REAL	ring_x_outer_radius		=	50.0000000000000						
REAL	ring_y_inner_radius		=	43.80000000000000						
REAL	ring_y_outer_radius		=	47.30000000000000						
REAL	ring_z_minimum		=	-2.03000000000000						
REAL	ring_z_maximum		=	2.03000000000000						

# DEFINITION OF BLOCK POSITIONS										
# The blocks can be positioned in any manner within the ring subject to										
# three constraints:  they must fall entirely within the ring outer										
# dimensions described above;  the axial faces of the blocks remain										
# parallel to the transaxial plane; and no two blocks overlap.										

NUM_ELEMENTS_IN_LIST		ring_num_blocks_in_ring		=	15					

										
	# Block	0								
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5				
		STR	ring_block_parameter_file =			"BGO.blocparms"				
		REAL	ring_block_radial_position =			43.8				
		REAL	ring_block_angular_position =			0				
		REAL	ring_block_z_position =			0				
		REAL	ring_block_transaxial_orientation =			0				
										
	# Block	1								
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5				
		STR	ring_block_parameter_file =			"BGO.blocparms"				
		REAL	ring_block_radial_position =			43.8				
		REAL	ring_block_angular_position =			24				
		REAL	ring_block_z_position =			0				
		REAL	ring_block_transaxial_orientation =			0				
										
	# Block	2				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			48
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	3				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			72
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	4				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			96
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	5				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			120
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	6				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			144
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	7				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			168
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	8				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			192
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	9				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			216
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	10				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			240
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	11				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			264
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	12				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			288
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	13				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			312
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0
						
	# Block	14				
	NUM_ELEMENTS_IN_LIST		ring_block_description_list =			5
		STR	ring_block_parameter_file =			"BGO.blocparms"
		REAL	ring_block_radial_position =			43.8
		REAL	ring_block_angular_position =			336
		REAL	ring_block_z_position =			0
		REAL	ring_block_transaxial_orientation =			0