SimpleNumber:

Filter: - Description
- Class methods
- Instance methods
- math support
- +
- -
- *
- /
- %
- mod
- div
- **
- !=
- >
- <
- >=
- <=
- lcm
- gcd
- round
- roundUp
- smallButNotZero
- trunc
- softRound
- snap
- thresh
- min
- max
- wrap2
- atan2
- hypot
- log
- log2
- log10
- neg
- abs
- sign
- ceil
- floor
- sin
- cos
- tan
- asin
- acos
- atan
- sinh
- cosh
- tanh
- frac
- squared
- cubed
- sqrt
- exp
- reciprocal
- pow
- fold2
- previousPowerOf
- nextPowerOf
- nextPowerOfTwo
- nextPowerOfThree
- hash
- <!
- &
- |
- bitXor
- bitHammingDistance
- bitTest
- bitNot
- <<
- >>
- +>>
- rightShift
- unsignedRightShift
- leftShift
- bitOr
- bitAnd
- ring1
- ring2
- ring3
- ring4
- difsqr
- sumsqr
- sqrdif
- sqrsum
- absdif
- moddif
- amclip
- scaleneg
- clip2
- excess
- madd
- threshdb
- maxdb
- mindb
- clipdb2
- clipdb
- testing
- conversion
- asFraction
- asAudioRateInput
- asTimeString
- asPoint
- asComplex
- asWarp
- asFloat
- asRect
- asBoolean
- asQuant
- asInteger
- asCartesian
- timing
- series and arrays
- windowing
- mapping
- distort
- softclip
- scurve
- ramp
- magnitude
- angle
- degreeToKey
- keyToDegree
- gaussCurve
- equalWithPrecision
- quantize
- linlin
- linexp
- explin
- expexp
- lincurve
- curvelin
- bilin
- biexp
- lcurve
- degrad
- raddeg
- midicps
- cpsmidi
- midiratio
- ratiomidi
- ampdb
- dbamp
- octcps
- cpsoct
- kFreq
- freqK
- streams
- random
- UGen Compatibility Methods
- misc
- Special Functions
- Number Series
- Gamma Functions
- tgamma
- tgamma1pm1
- lgamma
- digamma
- trigamma
- polygamma
- tgammaRatio
- tgammaDeltaRatio
- gammaP
- gammaQ
- tgammaLower
- tgammaUpper
- gammaPInv
- gammaQInv
- gammaPInvA
- gammaQInvA
- gammaPDerivative
- gammaQDerivative
- Factorials and Binomial Coefficients
- Beta Functions
- beta
- ibeta
- ibetaC
- betaFull
- betaFullC
- ibetaInv
- ibetaCInv
- ibetaInvA
- ibetaCInvA
- ibetaInvB
- ibetaCInvB
- ibetaDerivative
- Error Functions
- Polynomials
- legendreP
- legendrePPrime
- legendrePZeros
- legendrePAssoc
- legendreQ
- laguerre
- laguerreAssoc
- hermite
- chebyshevT
- chebyshevU
- chebyshevTPrime
- chebyshevTZeros
- sphericalHarmonic
- sphericalHarmonicR
- sphericalHarmonicI
- Bessel Functions
- cylBesselJ
- cylNeumann
- cylBesselJZero
- cylNeumannZero
- cylBesselI
- cylBesselK
- sphBessel
- sphNeumann
- cylBesselJPrime
- cylNeumannPrime
- cylBesselIPrime
- cylBesselKPrime
- sphBesselPrime
- sphNeumannPrime
- Hankel Functions
- Airy Functions
- Elliptic Integrals
- ellintRf
- ellintRd
- ellintRj
- ellintRc
- ellintRg
- ellint1
- ellint1C
- ellint2
- ellint2C
- ellint3
- ellint3C
- ellintD
- ellintDC
- jacobiZeta
- heumanLambda
- Jacobi Elliptic Functions
- jacobiCd
- jacobiCn
- jacobiCs
- jacobiDc
- jacobiDn
- jacobiDs
- jacobiNc
- jacobiNd
- jacobiNs
- jacobiSc
- jacobiSd
- jacobiSn
- Zeta Functions
- Exponential Integrals
- Basic Functions
- Sinus Cardinal (Sinc) and Hyperbolic Sinus Cardinal Functions
- Inverse Hyperbolic Functions
- Owen's T Function
- Extensions by MathLib
- Extensions by wslib
- Inherited instance methods
- Undocumented instance methods
- asBufWithValues
- asColor
- asEvent
- asMIDIInPortUID
- asQuaternion
- asSMPTEString
- asSize
- asTimeStringLJP
- asWebColorString
- betarand
- bi2uni
- binaryValue
- binomial
- breakUp
- buildForProxy
- calcPC
- calcPVRecSize
- cauchy
- cpsname
- cpstransp
- cpsvoicetype
- delta
- firstArg
- forceRange
- gaussian
- getArrowKey
- guiClass
- halfsteps
- hertz
- hypotApx
- interpret
- interpretVal
- keynum
- linrrand
- logistic
- makeScale
- makeScaleCps
- makeScaleMidi
- makeScaleName
- mapIntoBounds
- mapIntoRange
- midinote
- midivoicetype
- note
- noteAccidental
- noteName
- noteOctave
- numChannels
- pareto
- pc
- performBinaryOpOnComplex
- performBinaryOpOnQuaternion
- performBinaryOpOnSignal
- performBinaryOpOnSimpleNumber
- pitchClass
- playAndDelta
- poisson
- poll
- proxyControlClass
- range
- rangeExp
- rate
- uni2bi
- weibull
- writeInputSpec
- writeInputSpecOld
- xlistrand

Source: SimpleNumber.sc

Base class for numbers which can be represented by a single one dimensional value.

Most of the Unary and Binary operations are also implemented by UnaryOpUGen and BinaryOpUGen, so you can get more examples by looking at the help for those.

allocates a new SimpleNumber.

Addition

Subtraction

Multiplication

Division

From superclass: Object

Modulo

Modulo

Integer Division

From superclass: Object

Exponentiation

Is not

greater than

greater than

greater or equal than

smaller or equal than

Least common multiple

Greatest common divisor

Round to multiple of aNumber

Round up to a multiple of aNumber. For roundDown use trunc.

Check if the value is closer to zero than a threshold, but not zero.

thresh |
The threshold to use for comparison. |

Truncate to multiple of aNumber (e.g. it rounds numbers down to a multiple of aNumber).

Rounds the value to a multiple of **resolution**. By using **margin** and **strength** you can control which values will be rounded, and by how much.

Conceptually this is the equivalent of MIDI quantization in a DAW/MIDI sequencer. In particular it allows a certain sloppiness close to the **resolution** value.

Note: this method expects values >= 0.

resolution |
Round this value to a multiple of resolution. E.g. if you chose 1, then all values would be rounded to the nearest integer. |

margin |
Values that are within ± E.g. if you chose a resolution value of 0.5 and a margin of 0.01, then the values 0.501 and 0.499 would be left as they are, but the value 0.502 would become 0.5. This should be a value between 0 and |

strength |
Determines the degree to which this number will be changed. If strength is 1, then this function will return the nearest resolution. If it is 0, then value of this number will be left unchanged. E.g. If the resolution was 1 and strength was 0.5, then the value 0.6 would become 0.8. |

Rounds the values **margin** distance from resolution to a multiple of resolution. By using **margin** and **strength** you can control when values will be rounded, and by how much.

Conceptually this is the equivalent of 'snap' in a graphics program. Values within a certain distance (**margin**) from a grid line are snapped to it. All other values are unchanged.

Note: this method expects values >= 0.

resolution |
Snap this value to a multiple of resolution. E.g. if you chose 1, then all values would be rounded to the nearest integer. |

margin |
Only values that are greater ± E.g. if you chose a resolution value of 0.5 and a margin of 0.01, then the values 0.501 and 0.499 would be snapped to 0.5, but the value 0.502 would be unchanged. This should be a value between 0 and |

strength |
Determines the degree to which this number will be changed. If strength is 1, then this function will return the nearest resolution. If it is 0, then value of this number will be left unchanged. E.g. If the resolution was 1 and strength was 0.5, then the value 0.6 would become 0.8. |

Minimum

Maximum

Arctangent of (this/aNumber)

Square root of the sum of the squares.

Base e logarithm.

Base 2 logarithm.

Base 10 logarithm.

negation

absolute value.

Answer -1 if negative, +1 if positive or 0 if zero.

next larger integer.

next smaller integer

Sine

Cosine

Tangent

Arcsine

Arccosine

Arctangent

Hyperbolic sine

Hyperbolic cosine

Hyperbolic tangent

fractional part

the square of the number

the cube of the number

the square root of the number.

e to the power of the receiver.

1 / this

this to the power of aNumber

the folded value, a bitwise or with aNumber

the number relative to this that is the previous power of aNumber

the next power of aNumber

the number relative to this that is the next power of 2

the next power of three

a hash value

From superclass: Object

the receiver. aNumber is ignored.

From superclass: Object

Bitwise And

From superclass: Object

Bitwise Or

Bitwise Exclusive Or

Binary Hamming distance: the count of bits that are not the same in the two numbers

true if bit at index aNumber is set.

ones complement

From superclass: Object

Binary shift left.

From superclass: Object

Binary shift right.

From superclass: Object

Unsigned binary shift right.

performs a binary right shift

performs an unsigned right shift

performs a binary left shift

performs a bitwise or with aNumber

performs a bitwise and with aNumber

(a * b) + a

((a*b) + a + b)

(a * a *b)

((a*a *b) - (a*b*b))

(a*a) - (b*b)

(a*a) + (b*b)

(a - b) ** 2

(a + b) ** 2

(a - b).abs

On a circle, there are two distances between two points. This operator returns the smaller value of the two.

0 when b <= 0, a*b when b > 0

a * b when a < 0, otherwise a.

clips receiver to +/- aNumber

Returns the difference of the receiver and its clipped form.

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/SignalBox/Classes/extSimpleNumber.sc

Bilateral thresholding, in terms of dB.

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/SignalBox/Classes/extSimpleNumber.sc

Bilateral maximum, in terms of dB.

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/SignalBox/Classes/extSimpleNumber.sc

Bilateral minimum, in terms of dB. See also, -clip2.

Bilateral clipping, in terms of dB. Clips receiver to +/- aNumber.

Bilateral minimum, in terms of dB. If the receiver is less than lo then answer lo, else if the receiver is greater than hi then answer hi, else answer the receiver.

Answer if the number is >= 0.

Answer if the number is < 0.

Answer if the number is > 0.

true, if strictly positive ( > 0), otherwise false (see Boolean)

denominator | |

fasterBetter |
if true, asFraction may find a much closer approximation and do it faster. |

an array of denominator and divisor of the nearest and smallest fraction

Converts this into an audiorate input.

Produces a time string in the clock format inspired by ISO 8601 time interval display (truncated representation) `(ddd:)hh:mm:ss(.z)`

, interpreting the receiver as time in seconds. See String: -asSecs for the inverse function.

precision |
accuracy of the fraction of seconds; since the number of decimal places is also an argument, |

maxDays |
maximum number of days |

dropDaysIfPossible |
a Boolean. If set to |

decimalPlaces |
number of decimal places representing fraction of seconds, clamped to |

this as Point. x = y = this.

this as Point. x = y = this.

this as Float

a Rect with x = y = w = h = this.

this as a Boolean. this > 0

the values as Quant

this as Integer

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/MathLib/classes/SpherCoords/extSimpleNumber.sc

this as Cartesian. x = y = z = this.

within a routine, yield the number so that the clock can wait for this many beats. Outside a Routine, this trows an error (see also Routine for details).

Create a routine by a function fork

like wait, only specify a time (measured in beats of the current thread's clock). Outside a Routine, this throws an error (see also Routine for details).

make the current thread sleep, until woken up by re-scheduling. Outside a Routine, this trows an error (see also Routine for details).

clock |

the next possible multiple of the clock's beats.

the value in the list closest to this

scale |
an array of SimpleNumbers each treated as a step in the octave. |

stepsPerOctave |
12 by default |

the value in the collection closest to this, assuming an octave repeating table of note values.

Generate an arithmetic series from `this`

over **second** to **last**.

If **second** is `nil`

, it is one magnitude step towards last (1 or -1).

This is used in the shortcuts:

An Array.

The last value may not be included in the result if the step size does not divide evenly into the range of the series.

Create a Routine that iterates over an arithmetic series from `this`

over **second** to **last**.

Since this is a lazy operation, **last** can be `inf`

, generating an endless series. If unspecified, **last** is `inf`

or `-inf`

depending on the step direction.

See also -series and List Comprehensions.

A Routine.

a value for a rectangular window function between 0 and 1.

a value for a hanning window function between 0 and 1.

a value for a welsh window function between 0 and 1.

a value for a triangle window function between 0 and 1.

A nonlinear distortion function.

Implements:

this / (1.0 - abs(this))

Visualize:

Distortion with a perfectly linear region from -0.5 to +0.5.

Implements:

if (abs(this) < 0.5) { this } { (abs(this) - 0.25) / this };

Visualize:

Map receiver in the onto an S-curve bound to [0,1]. Implements:

this * this * (3.0 - (2.0 * this))

with `this`

clipped to [0,1].

Map the receiver onto a ramp starting at `0.0`

, ending at `1.0`

, effectively clipping the receiver at [0,1].

The absolute value.

Alternatively conceived of as the Polar: -magnitude or Complex: -magnitude, wherein the receiver is the real part and the imaginary part is `0.0`

.

scale |
an array of SimpleNumbers each treated as a step in the octave. |

stepsPerOctave |
12 is the standard chromatic scale. |

the value is truncated to an integer and used as an index into an octave repeating table of note values. Indices wrap around the table and shift octaves as they do.

inverse of degreeToKey.

scale |
an array of SimpleNumbers each treated as a step in the octave. |

stepsPerOctave |
12 is the standard chromatic scale. |

Map the receiver onto a gauss function.

Uses the formula:

a * -exp((this - b).squared / (2 * c.squared))

where `a`

is the distribution amplitude, `b`

is the mean (typically denoted *mu*), and the variance is `c.squared`

(*sigma*^2).

The method defaults to a "standard normal distribution": a zero mean and both the peak amplitude and variance are `1.0`

(`a = 1.0, b = 0.0, c = 1.0`

).

that |
the number to compare with within precision |

precision |
The absolute precision, independent of the value compared |

relativePrecision |
The precision relative to the larger absolute of the values compared. |

true if receiver is closer to that than precision.

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/deprecated/3.10/deprecated-3.10.sc

Deprecated. Round the receiver to the quantum. If you're looking for MIDI quantization type features use `SimpleNumber#-softRound`

quantum |
amount. |

tolerance |
allowed tolerance. |

strength |
Determines how much the value is allowed to differ in the tolerance range. |

map the receiver from an assumed linear input range to a linear output range. If the input exceeds the assumed input range, the behaviour is specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from an assumed linear input range (inMin..inMax) to an exponential output range (outMin..outMax). The output range must not include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from an assumed exponential input range (inMin..inMax) to a linear output range (outMin..outMax). If the input exceeds the assumed input range. The input range must not include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from an assumed exponential input range (inMin..inMax) to an exponential output range (outMin..outMax). If the input exceeds the assumed input range. Both input range and output range must not include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from an assumed linear input range (inMin..inMax) to an exponential curve output range (outMin..outMax). A curve is like the curve parameter in Env. Unlike with linexp, the output range may include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

curve |
0 (linear) <0 (concave, negatively curved) >0 (convex, positively curved) |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from an assumed curve-exponential input range (inMin..inMax) to a linear output range (outMin..outMax). If the input exceeds the assumed input range. A curve is like the curve parameter in Env. Unlike with explin, the input range may include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outMin |
output minimum |

outMax |
output maximum |

curve |
0 (linear) <0 (concave, negatively curved) >0 (convex, positively curved) |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from two assumed linear input ranges (inMin..inCenter) and (inCenter..inMax) to two linear output ranges (outMin..outCenter) and (outCenter..outMax). If the input exceeds the input range, the following behaviours are specified by the clip argument.

inCenter | |

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outCenter | |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver from two assumed exponential input ranges (inMin..inCenter) and (inCenter..inMax) to two linear output ranges (outMin..outCenter) and (outCenter..outMax). The input range must not include zero. If the input exceeds the input range, the following behaviours are specified by the clip argument.

inCenter | |

inMin |
assumed input minimum |

inMax |
assumed input maximum |

outCenter | |

outMin |
output minimum |

outMax |
output maximum |

clip |
nil (don't clip) \max (clip ceiling) \min (clip floor) \minmax (clip both - this is default). |

map the receiver onto an L-curve.

Uses the formula

This is used for smoothing values and limiting them to a range.

converts degree to radian

converts radian to degree

Convert MIDI note to cycles per second

cycles per second

Convert cycles per second to MIDI note.

midi note

Convert an interval in semitones to a ratio.

a ratio

Convert a ratio to an interval in semitones.

an interval in semitones

Convert a linear amplitude to decibels.

Convert a decibels to a linear amplitude.

Convert decimal octaves to cycles per second.

Convert cycles per second to decimal octaves.

Convert DFT coefficient number to frequency.

size |
DFT size |

sampleRate |
signal sample rate. Defaults to normalized frequency. |

Convert frequency to DFT coefficient number.

size |
DFT size |

sampleRate |
signal sample rate. Defaults to normalized frequency. |

stores this on the given stream

prints this on the given stream

Let *x* be the receiver clipped to the range [0, 1]. With probability *x*, return true. With probability 1 - *x*, return false.

Random number from zero up to the receiver, exclusive.

a random number from -this to +this.

aNumber |
the upper limit |

adverb |

a random number in the interval ]a, b[.

If both a and b are Integer then the result will be an Integer.

a linearly distributed random number from zero to this.

Bilateral linearly distributed random number from -this to +this.

This was suggested by Larry Polansky as a loose approximation of gaussian.

A random number from -this to +this that is the result of summing three uniform random generators to yield a bell-like distribution.

an exponentially distributed random number in the interval ]a, b[. This is always a Float. (Note that the distribution of numbers is not exactly an *exponential distribution*, since that would be unbounded: we might call it a *logarithmic uniform distribution*.)

aNumber |
the upper limit |

adverb |

a gaussian distributed random number.

standardDeviation |
the upper limit |

Always returns a Float.

randomly partition a number into parts of at least min size.

parts |
number of parts |

min |
the minimum size |

Some methods to ease the development of generic ugen code.

`this`

false if receiver cannot be used in UGen.

A variety of Special Functions are supplied by the Boost C++ library. The library's online documentation serves as the primary reference for the following functions. The methods here match closely with those found in the source library, as do argument names.

Below you'll find descriptions of the functions and their bounds, but for visualizing the functions, have a look in Tour of Special Functions.

WARNING: Many of the functions are only valid in certain numerical ranges. For the most part, error handling happens in the underlying boost functions. While these errors are often obtuse, you'll usually find a useful message at the end of the error regarding proper ranges and the erroneous value supplied. Refer to the online documentation for more detailed descriptions, and the Tour of Special Functions for plots showing ranges and asymptotes.

Take a tour of Number Series.

Returns the (2*`n`

)th Bernoulli number.

Because all odd numbered Bernoulli numbers are zero (apart from B(1) which is -1/2) the interface will only return the even numbered Bernoulli numbers.

Returns a single tangent number at `i`

. Also called a zag function.

Take a tour of Gamma Functions.

Returns the "true gamma" of value `z`

.

Returns `gamma(dz + 1) - 1`

.

Returns the natural logarithm of the gamma function.

Returns the digamma or psi function of `z`

.

Digamma is defined as the logarithmic derivative of the gamma function.

Returns the trigamma function of `z`

.

Trigamma is defined as the derivative of the digamma function.

Returns the polygamma function of `z`

.

Polygamma is defined as the `n`

'th derivative of the digamma function.

Returns the ratio of gamma functions `tgamma(a) / tgamma(b)`

.

Returns the ratio of gamma functions `tgamma(a) / tgamma(a+delta)`

.

Returns the normalised lower incomplete gamma function.

Requires `a`

> 0 and `z`

>= 0.

Returns the normalised upper incomplete gamma function.

Requires `a`

> 0 and `z`

>= 0.

Returns the full (non-normalised) lower incomplete gamma function.

Requires `a`

> 0 and `z`

>= 0.

Returns the full (non-normalised) upper incomplete gamma function.

Requires `a`

> 0 and `z`

>= 0.

Returns a value such that `p = gamma_p(a, x)`

.

Requires `a`

> 0 and 1 >= `p,q`

>= 0.

Returns a value x such that `q = gamma_q(a, x)`

.

Requires `a`

> 0 and 1 >= `p,q`

>= 0.

Returns a value such that `p = gamma_p(a, x)`

.

Requires `x`

> 0 and 1 >= `p,q`

>= 0.

Returns a value x such that `q = gamma_q(a, x)`

.

Requires `x`

> 0 and 1 >= `p,q`

>= 0.

Implements the partial derivative with respect to x of the incomplete gamma function (lower).

Implements the partial derivative with respect to x of the incomplete gamma function (upper).

Take a tour of Factorials and Binomial Coefficients.

Returns `i!`

.

WARNING:

`factorial`

will overflow if `i > 170`

Returns `i!!`

.

For **even** `i`

, `i !! = i(i-2)(i-4)(i-6) ... (4)(2)`

.

For **odd** `i`

, `i !! = i(i-2)(i-4)(i-6) ... (3)(1)`

.

Returns the rising factorial of `x`

and `i`

:

`x(x+1)(x+2)(x+3)...(x+i-1)`

Both `x`

and `i`

can be negative as well as positive.

Returns the falling factorial of `x`

and `i`

:

`x(x-1)(x-2)(x-3)...(x-i+1)`

This function is only defined for positive `i`

. Argument `x`

can be either positive or negative.

Requires `k`

<= `n`

.

Take a tour of Beta Functions.

The beta function is defined by: `tgamma(a)*tgamma(b) / tgamma(a+b)`

.

Returns the normalised incomplete beta function of `a`

, `b`

and `x`

.

Require 0 <= `x`

<= 1, `a,b`

>= 0, and in addition that not both `a`

and `b`

are zero.

Returns the normalised complement of the incomplete beta function of `a`

, `b`

and `x`

.

Require 0 <= `x`

<= 1, `a,b`

>= 0, and in addition that not both `a`

and `b`

are zero.

Returns the full (non-normalised) incomplete beta function of `a`

, `b`

and `x`

.

Require 0 <= `x`

<= 1, and `a,b`

> 0.

Returns the full (non-normalised) complement of the incomplete beta function of `a`

, `b`

and `x`

.

Require 0 <= `x`

<= 1, and `a,b`

> 0.

Returns a value `x`

such that: `p = ibeta(a, b, x)`

.

Requires `a,b`

> 0 and 0 <= `p`

<= 1.

Returns a value `x`

such that: `q = ibetaC(a, b, x)`

.

Requires `a,b`

> 0 and 0 <= `q`

<= 1.

Returns a value `a`

such that: `p = ibeta(a, b, x)`

.

Requires `b`

> 0, 0 < `x`

< 1, and 0 <= `p`

<= 1.

Returns a value `a`

such that: `q = ibetaC(a, b, x)`

.

Requires `b`

> 0, 0 < `x`

< 1, and 0 <= `q`

<= 1.

Returns a value `b`

such that: `p = ibeta(a, b, x)`

.

Requires `a`

> 0, 0 < `x`

< 1, and 0 <= `p`

<= 1.

Returns a value `b`

such that: `q = ibetaC(a, b, x)`

.

Requires `a`

> 0, 0 < `x`

< 1, and 0 <= `q`

<= 1.

Returns the partial derivative with respect to `x`

of the incomplete beta function `ibeta(a,b,x)`

.

Take a tour of Error Functions.

Returns the error function of `z`

.

Returns the complement of the error function of `z`

.

Returns the inverse error function of `z`

, that is a value `x`

such that:

`p = erf(x)`

.

Returns the inverse of the complement of the error function of `z`

, that is a value `x`

such that:

`p = erfC(x)`

Take a tour of Polynomials.

Returns the Legendre Polynomial of the first kind.

Requires -1 <= `x`

<= 1.

Returns the derivatives of the Legendre polynomials.

Since the Legendre polynomials are alternatively even and odd, only the non-negative zeros are returned. For the odd Legendre polynomials, the first zero is always zero. The rest of the zeros are returned in increasing order.

Returns the associated Legendre polynomial of the first kind.

Requires -1 <= `x`

<= 1.

Returns the value of the Legendre polynomial that is the second solution to the Legendre differential equation.

Requires -1 <= `x`

<= 1.

Returns the value of the Laguerre Polynomial of order `n`

at point `x`

.

Returns the Associated Laguerre polynomial of degree of dgree `n`

and order `m`

at point `x`

.

Returns the value of the Hermite Polynomial of order `n`

at point `x`

.

Returns the Chebyshev polynomials of the first kind.

Returns the Chebyshev polynomials of the second kind.

Returns the derivatives of the Chebyshev polynomials of the first kind.

Returns the roots (zeros) of the `n`

-th Chebyshev polynomial of the first kind.

Returns the (`Complex`

) value of the Spherical Harmonic.

`theta`

is taken as the polar (colatitudinal) coordinate within `[0, pi]`

, and `phi`

as the azimuthal (longitudinal) coordinate within `[0,2pi]`

.

See boost documentation for further information, including a note about the Condon-Shortley phase term of `(-1)^m`

.

Returns the real part of the Spherical Harmonic.

Returns the imaginary part of the Spherical Harmonic.

Take a tour of Bessel Functions.

Returns the result of the Bessel functions of the first kind.

The functions return the result of `domain_error`

whenever the result is undefined or complex. This occurs when `x < 0`

and `v`

is not an integer, or when `x == 0`

and `v != 0`

.

Returns the result of the Bessel functions of the second kind.

The functions return the result of `domain_error`

whenever the result is undefined or complex. This occurs when `x <= 0`

.

Returns a single zero or root of the Bessel function of the first kind.

`index`

is a 1-based index of zero of the cylindrical Bessel function of order `v`

.

Returns a single zero or root of the Neumann function (Bessel function of the second kind).

`index`

is a 1-based index of zero of the cylindrical Neumann function of order `v`

.

Returns the result of the modified Bessel functions of the first kind.

Returns the result of the modified Bessel functions of the second kind.

Requires `x > 0`

.

Returns the result of the spherical Bessel functions of the first kind.

Requires `x`

> 0.

Returns the result of the spherical Bessel functions of the first kind.

Requires `x`

> 0.

Returns the first derivative with respect to x of the corresponding Bessel function.

Returns the first derivative with respect to x of the corresponding Neumann function.

Requires `x > 0`

.

Returns the first derivative with respect to x of the corresponding Bessel function.

Returns the first derivative with respect to x of the corresponding Bessel function.

Requires `x > 0`

.

Returns the first derivative with respect to x of the corresponding Bessel function.

Requires `x > 0`

.

Returns the first derivative with respect to x of the corresponding Neumann function.

Requires `x > 0`

.

Take a tour of Hankel Functions.

Returns the result of the Hankel functions of the first kind.

Returns the result of the Hankel functions of the second kind.

Returns the result of the spherical Hankel functions of the first kind.

Returns the result of the spherical Hankel functions of the second kind.

Take a tour of Airy Functions.

Returns the result of the Airy function Ai at `x`

.

Returns the result of the Airy function Bi at `x`

.

Returns the derivative of the Airy function Ai at `x`

.

Returns the derivative of the Airy function Bi at `x`

.

Returns the `m`

th zero or root of the Airy Ai function. The Airy Ai function has an infinite number of zeros on the negative real axis.

`m`

is 1-based.

Returns the `m`

th zero or root (1-based) of the Airy Bi function. The Airy Bi function has an infinite number of zeros on the negative real axis.

`m`

is 1-based.

Take a tour of Elliptic Integrals.

Returns Carlson's Elliptic Integral RF.

Requires that `x,y >= 0`

, with at most one of them zero, and that `z >= 0`

.

Returns Carlson's Elliptic Integral RD.

Requires that `x,y >= 0`

, with at most one of them zero, and that `z >= 0`

.

Returns Carlson's Elliptic Integral RJ.

Requires that `x,y,z >= 0`

, with at most one of them zero, and that `p != 0`

.

Returns Carlson's Elliptic Integral RC.

Requires that `x >= 0`

, with at most one of them zero, and that `y != 0`

.

Returns Carlson's Elliptic Integral RG.

Requires that `x,y >= 0`

.

Returns the incomplete elliptic integral of the first kind, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the complete elliptic integral of the first kind, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the incomplete elliptic integral of the second kind, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the complete elliptic integral of the second kind, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the incomplete elliptic integral of the third kind, Legendre form.

Requires `-1 <= k <= 1`

and `n < 1/sin^2(phi)`

.

Returns the complete elliptic integral of the third kind, Legendre form.

Requires `-1 <= k <= 1`

and `n < 1`

.

Returns the incomplete elliptic integral **D(phi, k)**, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the complete elliptic integral **D(phi, k)**, Legendre form.

Requires `-1 <= k <= 1`

.

Returns the result of the Jacobi Zeta Function.

Requires `-1 <= k <= 1`

.

Returns the result of the Heuman Lambda Function.

Requires `-1 <= k <= 1`

.

Like all elliptic functions, these can be parameterised in a number of ways:

- In terms of a parameter
`m`

. - In terms of the elliptic modulus
`k`

where`m = k^2`

. - In terms of the modular angle
`α`

, where`m = sin2α`

.

This implementation takes the elliptic modulus `k`

as the parameter. In addition the variable `u`

is used to express an amplitude **φ**. All take the elliptic modulus as the first argument - this is for alignment with the Elliptic Integrals.

Take a tour of Jacobi Elliptic Functions.

Take a tour of Zeta Functions.

Returns the zeta function of `z`

.

Requires `z != 1`

.

Take a tour of Exponential Integrals.

Returns the exponential integral En of `z`

.

Requires that when `n == 1`

, `z !=0`

.

Returns the exponential integral of `z`

.

Requires `z != 0`

.

Take a tour of Basic Functions.

Returns `sin(x * π)`

.

Returns `cos(x * π)`

.

Returns the natural logarithm of `x+1`

.

Returns `e^x - 1`

.

Returns the cube root of `x`

.

Returns `sqrt(1+x) - 1`

.

Returns `x^y - 1`

.

Take a tour of Sinus Cardinal (Sinc) and Hyperbolic Sinus Cardinal Functions.

Returns the Sinus Cardinal of `x`

. Also known as the "sinc" function.

`sincPi(x) = sin(x) / x`

Returns the Hyperbolic Sinus Cardinal of `x`

.

`sinhcPi(x) = sinh(x) / x`

Take a tour of Inverse Hyperbolic Functions.

Returns the reciprocal of the hyperbolic sine function at `x`

.

Returns the reciprocal of the hyperbolic cosine function at `x`

.

Requires `x >= 1`

.

Returns the reciprocal of the hyperbolic sine function at `x`

.

Requires `-1 < x < 1`

.

Take a tour of Owen's T Function.

Returns the Owens T function of `h`

and `a`

.

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/MathLib/classes/SystemOverwrites/extSimpleNumber.sc

Bilateral thresholding.

thresh |
When the |

adverb |
Optional, for processing Collections. See Adverbs for Binary Operators. |

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/Note/extVarious-asNote.sc

Note whose MIDI pitch matches the given number

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/Note/extVarious-midiname.sc

Convert a MIDI note number to a note name such as `Bb3`

.

sign |
String, Symbol, or Char containing |

String containing the note name, with unique `-alt`

method returning an Integer with the same meaning as Note: -getalt, and `-cents`

method returning the number of cents.

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/SVGFile/extVarious-SVGFile.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/Common/Streams/Rest.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/MathLib/classes/various/Quaternion.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/SMPTE/extNumber-asSMPTEString.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/Common/Geometry/Size.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/LoopBufUGens/classes/LJP Classes/Extensions/SimpleNumber-asTimeString.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/SVGFile/extVarious-SVGFile.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/LoopBufUGens/classes/LJP Classes/ProbabilityDistributions.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Lang/Improvements/extVarious-range.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/MathLib/classes/statistics/extStatistics.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Extensions/Collection/extNumber-breakUp.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/JITLib/ProxySpace/wrapForNodeProxy.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/Ctk/Ctk classes/PitchClass.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/JoshUGens/classes/JoshPV.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/LoopBufUGens/classes/LJP Classes/ProbabilityDistributions.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/Note/extVarious-midiname.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/Note/extVarious-midiname.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/Common/Streams/Rest.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Lang/Improvements/extVarious-range.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/LoopBufUGens/classes/LJP Classes/ProbabilityDistributions.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/GUI/Views/RoundView.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/Common/GUI/tools/guicrucial/gui.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/Ctk/Ctk classes/PitchClass.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/Ctk/Ctk classes/PitchClass.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Main Features/SVGFile/extVarious-SVGFile.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/Ctk/Ctk classes/addSimpleNumber.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/Ctk/Ctk classes/addSimpleNumber.sc

From extension in /Library/Application Support/SuperCollider/Extensions/sc3-plugins-3.13.0/SC3plugins/LoopBufUGens/classes/LJP Classes/Extensions/midinote.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/MathLib/classes/various/Quaternion.sc

From extension in /SuperCollider/Contents/Resources/SCClassLibrary/JITLib/ProxySpace/wrapForNodeProxy.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Lang/Improvements/extVarious-range.sc

From extension in /Library/Application Support/SuperCollider/downloaded-quarks/wslib/wslib-classes/Lang/Additions/extSimpleNumber-xlistrand.sc

helpfile source: /SuperCollider/Contents/Resources/HelpSource/Classes/SimpleNumber.schelp

link::Classes/SimpleNumber::

link::Classes/SimpleNumber::