UW CHEMISTRY NMR

Announcments & Equipment Logs

June, 2013

AV500 UPDATE : LOGIN PROBLEM STILL PERSISTS – WORKAROUND IN PLACE

It will be at least Monday before the UWNetid related network login problem is sorted out.  In the meanwhile, users can use the instrument with the local ‘genuser’ login id.  The login credentials are posted prominently next to the AV500 computer keyboard.  After the data collection, you can download your data from the directory ‘genuser/nmr’ […]

Posted in Host Computer, Operating System | No Comments »

ALERT ! : AV500 LOGIN ISSUE

The login system is down and currently being investigated.  Owing to this the instrument is not usable at this point.  Please look for an update here about the progress made.

Posted in Host Computer, Operating System | No Comments »

AV500 UPDATE : PROPER SETUP OF EXPERIMENTS

Following the reconfiguration of the Lock system, users need to observe the following procedure to get correct results. If you are copying an old data set to start a new run, please run the  edasp command.   You will see a graphical window similar to the following : Click on the Save button to exit. Your […]

Posted in Software, Spectrometer, Usage | No Comments »

AV500 : LOCK UPDATE

Users had noted that the intermittent lock issue was back again.  A careful scrutiny was made and a needed configuration change was made to solve this problem.  The system should lock on all solvents without any error now.  If it is otherwise, please do note the same in the Log Book along with any other […]

Posted in Hardware, Software, Spectrometer | No Comments »

AV500 UPDATE : LOCK ISSUE FIXED

A possible power fluctuation over the weekend led to the disrupted lock and acquisition conditions of the instrument. These are now resolved and users can continue with normal operation of the instrument.

Posted in Hardware, Spectrometer | No Comments »

Item Categories