UW CHEMISTRY NMR
Announcments & Equipment Logs
April, 2023
UPDATE ! NEO500 — ALL NORMAL
The sample handling system did enter a failed state but it is reset to normal and it’s working OK as we speak. The cause of the original error condition is being looked into. NMR Facility Manager 4/27/23
Posted in Hardware, Spectrometer | No Comments »
REMINDER (2) : GG500 – SOFTWARE INTERFACE POLL
Dear Users For those of you who missed some action on what this title implies, here is a quick link to bring you up to speed. We have a brand new BBFO fully automated probe (i.e. automatic tuning/matching, locking/shimming) that is ready to replace the aging TXO-1H-19F probe that is coupled to the GG500 console. […]
Posted in Hardware, Spectrometer, Uncategorized, Usage | No Comments »
UPDATE : NEO500 – SAMPLE HANDLING IS NORMAL
Dear Users I saw one post a few minutes ago highlighting that the sample injection entered an error state. The system is reset and tested to be normal now. But, I couldn’t troubleshoot the original cause, as I didn’t see any sample tubes in the Carousel and the gray colored ‘sample carrier’ at the top […]
Posted in Hardware, Spectrometer | No Comments »
UPDATE : GG500 : 13C PARAMETER SET BEHAVES OK NOW
Dear Users First of, sorry for the disruption caused for those of you who have come to depend on the default parameter settings for your 13C routine runs. I take sole responsibility for the same, since I was test running a ‘multi acquisition’ version of the 13C NMR with temperature variation in-built, to address a […]
Posted in Software, Spectrometer, Usage | No Comments »
REMINDER ! GG500 – SOFTWARE SNAP POLL and IMMINENT PROBE UPGRADE
Dear Users For the benefit of those of you who might have missed my last call on the topic, please click on the link below. SNAP POLL: GG500’s NEW BBFO iProbe – SOLICITING YOUR INPUT I renew the call above and request you to email to : rajanp@uw.edu about which of the three software […]
Posted in Hardware, NMR Facility Usage, Software, Spectrometer, Usage | No Comments »
REMINDER : NEO500 – CALENDAR AND QUEUE
Dear Users We hope that you have come to like the convenience of walking up to NEO500 without planning to reserve NMR time a priori. This is a decidedly efficient protocol in extracting maximum from the instrument as well. Nevertheless, ensuring the smooth running of this complex system that can always give you the data […]
Posted in Spectrometer, Usage | No Comments »
UPDATE : NEW WORKSTATION FOR YOUR CONVENIENCE
Dear Users As you enter the NMR lab (Bagley, 37), you can now notice a computer next to the printer. This is a new workstation running Windows 10 for your offline convenience. This is a Kiosk machine, which does not require any login and the desktop is available always. (If you feel bored enough to […]
Posted in NMR Facility Usage | No Comments »
SNAP POLL: GG500’s NEW BBFO iProbe – SOLICITING YOUR INPUT
Dear Users Just short of two months ago, I made an announcement about GG500 getting its own brand new fully automated BBFO probehead. Click on this link to that post, for quick reference. We ran into some technical challenges in integrating that probe with GG500, but they have been sorted out. The probe is ready […]
Posted in Probeheads, Software, Spectrometer, Usage | 1 Comment »
UPDATE ! GG500 — SYSTEM IS BACK TO THE USUAL INTERFACE – ROUTINE SPECTROSCOPY
Dear Users Sorry for the inconvenience and confusion caused from yesterday evening until a few moments ago, when the familiar ‘Green backdrop’ based Routine spectroscopy disappeared. In the process of troubleshooting the interface, I had to switch the system to ‘Automation Interface’, similar to what is present in the New NEO500 instrument. But, as I […]
Posted in NMR Facility Usage, Software, Spectrometer | No Comments »