UW CHEMISTRY NMR
Announcments & Equipment Logs
Hardware
UPDATE ! GG500 – OPEN FOR USE WITH NEW iPROBE
Dear Users The NEW iProbe is installed and tested to its minimal functionality so that you can start running your routine spectroscopy without further waiting. But, let me emphasize the following points, which you need to take note of : Recall your detailed training on the 300 systems. You will need the same skill set […]
Posted in Hardware, Spectrometer, Usage | No Comments »
UPDATE ! PHEONIX FTP SERVER IS UP…
Please let us know if you face any issues. NMR Facility Manager 5/2/23
Posted in Hardware, NMR Facility Usage, Software | No Comments »
UPDATE ! GG500 – NEW iProbe INSTALLATION IN PROGRESS
Dear Users First, from your feedback : A clear majority of you want to operate the GG500 instrument with the new iProbe using the traditional Topspin Interface, where you can freely interact with the system and do as you please (with the watchful assistance of me and Adrienne, of course, so that no inadvertent […]
Posted in Hardware, Software, Spectrometer, Usage | No Comments »
UPDATE ! NEO500 — ALL NORMAL
The sample handling system did enter a failed state but it is reset to normal and it’s working OK as we speak. The cause of the original error condition is being looked into. NMR Facility Manager 4/27/23
Posted in Hardware, Spectrometer | No Comments »
REMINDER (2) : GG500 – SOFTWARE INTERFACE POLL
Dear Users For those of you who missed some action on what this title implies, here is a quick link to bring you up to speed. We have a brand new BBFO fully automated probe (i.e. automatic tuning/matching, locking/shimming) that is ready to replace the aging TXO-1H-19F probe that is coupled to the GG500 console. […]
Posted in Hardware, Spectrometer, Uncategorized, Usage | No Comments »
UPDATE : NEO500 – SAMPLE HANDLING IS NORMAL
Dear Users I saw one post a few minutes ago highlighting that the sample injection entered an error state. The system is reset and tested to be normal now. But, I couldn’t troubleshoot the original cause, as I didn’t see any sample tubes in the Carousel and the gray colored ‘sample carrier’ at the top […]
Posted in Hardware, Spectrometer | No Comments »
REMINDER ! GG500 – SOFTWARE SNAP POLL and IMMINENT PROBE UPGRADE
Dear Users For the benefit of those of you who might have missed my last call on the topic, please click on the link below. SNAP POLL: GG500’s NEW BBFO iProbe – SOLICITING YOUR INPUT I renew the call above and request you to email to : rajanp@uw.edu about which of the three software […]
Posted in Hardware, NMR Facility Usage, Software, Spectrometer, Usage | No Comments »
UPDATE ! GG500 – SHIMMING OK
Dear Users The Warning message noted today related to preamplifier and the failure of Topshim were related and the root cause is identified and eliminated. The system is shimming as before and everything is back to normal. NMR Facility Manager 3/28/23
Posted in Hardware, Spectrometer | No Comments »
UPDATE ! NEO500 – WILL ACCEPT SAMPLES FROM 3 PM
Dear Users The hardware replacement is complete and the tests have passed. You can start queuing samples from 3 PM. NMR Facility Manager 3/16/2023
Posted in Hardware, Spectrometer, Usage | No Comments »
UPDATE ON NEO500 – SYSTEM WILL GET TO MAINTENANCE MODE IMMEDIATELY
Hello All The hardware parts reached earlier than exepcted, and the system is not shimming at all with the current configuration. It makes sense, therefore, to swap the hardware without any further delay and test it. As an upside, if everything goes well, the instrument will be released much earlier than expected. Please wait for […]
Posted in Hardware, Spectrometer | No Comments »