Abstract:
The Oregon Spotted Frog is currently a federal Candidate for listing under the Endangered Species Act. The report provides a habitat screening that biologists in Washington State can apply in the field to determine whether wetlands contain suitable habitat for the Oregon Spotted Frog. In the event that this species is listed, the application of the model will facilitate a more streamlined consultation process of transportation projects in the event of this species.

Authors:
Germaine,S. S., Consentino,B. L.

Keywords:
amphibians, Endangered species act, frogs, habitat, model, occupancy, Oregon Spotted Frog, Pacific Northwest, project, Rana pretisoa, transportation, Washington, Washington state, wetlands, wildlife

Download Report:

External Links: http://www.wsdot.wa.gov/research/reports/fullreports/585.1.pdf http://wsdot.wa.gov/Research/Reports/500/585.1.htm

Abstract:
The purpose of this study was to evaluate whether conditions associated with over-water structures enhance predation pressure on juvenile salmon in Puget Sound. Washington State Ferry served as model. Over-water structures for exploring these issues. This document reports bird and survey results from six north-central Puget Sound WSF terminals and paired reference sites over both \"pre\" and \"peak\" periods of outmigrating salmon fry abundance from April 1 to May 10, 2002. We conclude that potential salmon predators were slightly more abundant at WSF terminals as compared with unmodified shorelines, although large aggregations were not observed on any occasion. The spatial distribution patterns of both bird and fish predators rarely overlapped with juvenile salmon oriented in surface waters close to shore. We were unable to verify whether potential predators were more abundant during peak salmon out-migration, because salmon were available in these habitats throughout the duration of our study. We found no evidence that avian, marine mammal, or fish predators consumed more juvenile salmon near WSF terminals than along shorelines without over-water structures. Few species appeared to be targeting abundant in near-shore habitats, and we observed only two occasions in which predators (one tern Sp. One staghorn sculpin) had consumed juvenile salmon. Several hypotheses are offered as to why we did not observe elevated rates of predation on juvenile salmon in the face of their greater relative availability to predators in near-shore habitats.

Authors:
Williams,G. D., Thom,R. M., Shreffler,J. A., Southard,L., O\'Rourke,K., Sargeant,S. L., Cullinan,V. I., Moursund,R., Stamey,M.

Keywords:
Assessing, availability, condition, ferry, fish, habitat, habitats, Issues, juvenile salmon, marine, model, nearshore habitat, over-water structure, Overwater, overwater structure, overwater structures, predation, Prediation Risk, pressure, salmon, Structure-related, structures, Study, survey, Washington, Washington state

Download Report:

External Links: http://www.wsdot.wa.gov/research/reports/fullreports/573.1.pdf http://wsdot.wa.gov/Research/Reports/500/573.1.htm

Abstract:
An estimated 2,400 to 4,000 hydraulic structures are barriers to fish passage in Washington State. Many are culverts inadequately sized for fish Recently, the Washington Department of Fish and Wildlife established statewide guidelines to incorporate fish migration into culvert design by providing two approaches: stream simulation and hydraulic design. Stream simulation involves culverts to be wider than the natural channel under bank-full conditions. The hydraulic design option requires culverts to satisfy minimum depth and maximum hydraulic drop constraints ranging from 0.8 to 1.0 A and permissible velocities from 2.0 to 6.0 depending on species and culvert length. The permissible velocity criterion is to be met during fish passage design flow. A new model is presented for fish passage design flows at streams in Eastern Washington. The model is founded on two key concepts: a unique definition of fish passage design flow and an area based approach for estimating flow at ungaged streams. The fish design flow was developed by combining the concepts of allowable fish delay, established to be 3 days, with a consecutive day analysis. This design flow ensures that fish are not delayed for than 3 consecutive days during a water year. A fish passage design flow per area is assigned to previously delineated subwatersheds in Eastern Washington. Similarity relationships, derived basin characteristics, relate Geological Survey gaging stations to sub-watersheds in Eastern Washington. These relationships form the basis for a value of fish passage design flow per unit area to each sub-watershed in Eastern Washington. The percent standard error for this model was calculated as 36%. This is a significant improvement the 75% standard error calculated for the model that previously addressed fish passage design flows in Eastern Washington.

Authors:
Rowland,E. R., Hotchkiss,R. H., Barber,M. E.

Keywords:
analysis, barrier, barriers, Channel, condition, culvert, design, design flows, developed, Error, fish, fish passage, flow, hydrologic models, improvement, model, modeling, structural safety, structures, survey, velocity, Washington, Washington state, wildlife

Download Report:

External Links: http://www.wsdot.wa.gov/research/reports/fullreports/545.1.pdf http://wsdot.wa.gov/Research/Reports/500/545.1.htm

Abstract:
The pervasive problem of restoring fish runs to their natal streams is characterized in many regions of Washington by improperly placed culverts. The replacement of these fish migration barriers requires knowledge of design flows: floods for structural safety and migration season high and low flows. High flows block fish passage with velocities that exceed their swimming capabilities. During low flows, the migration barrier is caused by a lack of enough water depth to support the bodies of the fish. The estimation of these fish passage and safety flows in ungaged streams is impeded in eastern Washington due to: the wide range of conditions (5 to 110 inches per year of precipitation); diverse geology and soils; a lack of stream-gaging stations with long-term records; changes in land use; and the seasonal impacts of irrigation diversions and well on the remnant flows. Past efforts to estimate these flows have not been successful. Therefore, the WSU project was undertaken to model the high migration season flow in all of eastern Washington. In addition, WSU established 20 stream-gaging stations on salmon streams along the east side of the Cascade Mountains plus the Blue Mountains. Our complementary project was developed to estimate other design flows in the Water Resource Inventory Areas and 49, in which the WSU gage sites are located. United States Geological Survey (USGS) gage records in those (and in and 47) were used to develop our models that estimate the following statistical flows: 100-year, 25-year and 2-year daily and peak floods; the average annual flow and its variability; ranges of mean monthly flows (maximum, average and low); the 7-day average, 2-year, 10-year, 20-year low flow; and the 30- and 60-day average low flows. The model results are, for the most part, very good. The standard error of estimate ranges are: for floods, 2 -37%; average annual flow, 10-37%; maximum annual flow, 6 -14%; annual flow, 13 -23%; and flows, 3 -22%. Monthly average flows reflected the strong influences of seasonal variability and irrigation withdrawals: due to winter frozen Iowa flows (3%)in the Entiat,-Wenatchee Region, and August low flows (242%) in the Blue Mountains due to irrigation. All flow estimation equations were based on USGS stream-gaging data from continuous located in the located in the WRIA'S.

Authors:
Orsborn,J. F., Orsborn,M. T.

Keywords:
Annual, barrier, barriers, condition, culvert, culverts, data, design, design flows, developed, equations, Error, fish, fish passage, flood, flow, hydrologic models, impact, impacts, ITS, land use, land-use, model, models, project, safety, salmon, season, seasonal, soil, structural safety, survey, velocity, Washington, winter

Download Report:

External Links: http://www.wsdot.wa.gov/research/reports/fullreports/545.2.pdf http://wsdot.wa.gov/Research/Reports/500/545.2.htm

Abstract:
This report provides estimates of the value of outputs, inputs, and markets served by elements of the transportation services industries in Washington State. This study is an extension of The Washington State Input-Output Study for 1982 by the inclusion of a detailed examination (by mode of transportation) of purchase-sales relationships.A gross flows matrix (62 x 64) direct requirements table (59 x 59) and output multiplier matrix with households endogenous are included. Impact multipliers (value added, earnings, jobs) for the transport sectors are included. The study estimates of the economic importance of the transportation industry in Washington. The model facilitates the evaluation of the impact of autonomous changes in the demand for transportation services upon the of the regional economy, and the estimation of the impacts of changes in the rest-of-the-economy upon the demand for transportation services in Washington State.

Authors:
Bourque,P. J.

Keywords:
demand, evaluation, flow, households, impact, impacts, Input-output, model, transport, transport economics, transportation, transportation service, value-added, Washington, Washington state

Download Report:

Abstract:
This research has attempted to determine the distribution of precipitation in the complex terrain of Washington State. The first part of this report examines the precipitation distribution for various large scale wind directions. It is found that there are meaningful shifts in the precipitation pattern as the large scale wind changes direction and that edge of this behavior can be useful for operational applications. The second section presents a simple numerical model of precipitation in complex terrain. Although the results are not perfect by any means, they can usefully indicate the variation precipitation in the mountains of our area. However, such a model requires at least a minicomputer to run it.

Authors:
Speers,P., Mass,C. F.

Keywords:
applications, behavior, Complex Terrain, Diagnosis, model, Precipitation, prediction, Regions, research, Washington, Washington state, wind

Download Report:

Abstract:
This report present the final form of the Washington State Highway runoff pollutant loading model, incorporating data from the five years of study. It also features a probabilistic analysis of concentration and loading data designed to express the chance of exceeding specific values in a given case. Other topics include further assessment of the toxicity of highway runoff and its causes and mitigation.

Authors:
Little,M. L., Horner,R. R., Mar,B. W.

Keywords:
analysis, Assessment, data, highway, highway runoff, ITS, mitigation, model, pollutant loading, runoff, stormwater, Toxicity, Washington, Washington state

Download Report:

Abstract:
Statewide sampling of highway runoff continued through 1980-81, and the resulting data has been aggregated with that from previous years to further investigate pollutant loadings. Results have validated the solids loading model previously proposed by Asplund (1980) for Western Washington Highways and tentatively extended the model to Eastern Washington. Loading of there pollutants can be predicted from total suspended solids loading using ratios derived from the data. These ratios may be taken as constants at any Washington State location for some pollutants or as linear functions of traffic or other contaminants. Comparison of runoff from a sulfur-extended asphalt pavement with runoff elsewhere indicates higher sulfate loads in the former case. A limited sampling program along an uncurbed highway section observed higher pollutant concentrations from these sections to curbed areas. Sampling of solids adhering to the undercarriage of automobiles produced widely varying results but suggested that vehicles traveling on rural or unpaved roads accumulate significant amounts of solids that can be released on highways. The final year of field sampling will concentrate on improving the loading models, especially for Eastern Washington application, and continuing the sulfur extended asphalt study with a functional control site experiencing the same conditions.

Authors:
Tai Wik,David Chui, Mar,B. W., Horner,R. R.

Keywords:
analysis, asphalt, asphalt pavement, Concentrations, condition, control, data, extended asphalt, highway, highway runoff, Highways, loads, model, models, pavement, pollutant loading, Pollutants, program, runoff, rural, sampling, statistical analysis, sulfur, suspended solids, traffic, Washington, Washington state

Download Report:

Abstract:
A highway storm water runoff pollutant loading. model has been developed based on results from con3posire sampling of approximately 600 storms at nine locations in the State of Washington over five years. The model expresses total suspended solids (TSS) loading in proportion to the product of highway segment length, average runoff coefficient, and vehicles traveling during storm periods. It was dem-onstrated that loadings of contaminants such as chemical oxygen demand, nutrients and trace metals could be estimated from TSS loadings using ratios derived from the data, The model described was developed and validated for assessing total loadings over a time span encompassing a number of storms (monthly or annually). To predict pollutant concentrations and loadings in runoff from a given storm, cumulative distributions were plotted and analyzed to determine the probability of exceeding specific concentration and loading values in a given case. Bioassay studies using highway runoff indicated toxicity to aquatic life when elevated metals deposition from high traffic volumes (in excess of 10,000 -20,000 vehicles per day) or high metals concentrations in rainfall caused runoff concentrations to exceed lethal levels. Draining highway runoff through grass channels 60 meters in length greatly reduced TSS and metals concentrations and the consequent toxic effects. The major product of this research is a guide to assessing and mitigating the impacts of highway runoff to receiving waters.

Authors:
Mar,B. W., Horner,R. R., Spyridakis,D. E., Welch,E. B.

Keywords:
Assessment, Channel, Chemical, Concentrations, data, demand, deposition, developed, highway, highway runoff, impact, impacts, Loadings, Highway runoff, metals, mitigation, model, models, pollutant loading, Pollutants, quality, rainfall, research, runoff, sampling, span, stormwater, suspended solids, Toxicity, traffic, traffic volumes, volume, Washington, Washington state, water quality

Download Report:

Abstract:
An extensive literature review , laboratory column study and field observations indicated that leaching of soluble pollutants from woodwaste submerged in groundwater will be completed within a few years. Longer periods of leaching will be generated by woodfills above groundwater exposed to precipitation or infiltration of runoff. Expressions to model the quantity and characteristics quality of leachate from woodwaste fills used for road embankments were developed, and mitigating measures to reduce the impact of leachates are proposed.

Authors:
Vause,Kurt H., Ferguson,John F., Mar,B. W.

Keywords:
column studies, developed, embankment, Embankments, highway, impact, impacts, infiltration, Leachate, model, Pollutants, quality, review, runoff, water quality, Woodwaste fills

Download Report:

Abstract:
A photogrammetric monitoring method of structural deformation has been developed during the course of this project. The method is based on a combination of aerial and terrestrial photographs.The theoretical experimentation for formulation of computer programs has beendone on mathematical model s. The combination of aerial and terrestrial photographsprovides a 30% increased accuracy if compared to terrestrial photographsonly. Practical experimentation was done on the existing Gabion Wall and itwas indicated that the achievable accuracy is 1/120,000 o f the photographicdistance. The method is flexible if it can be used for monitoring of an$type of structure as well as f o r aerialtriangulation.

Authors:
Veress,S. A., Hatzopoulos,J. N.

Keywords:
computer, computer program, developed, Gabion, model, monitoring, Photogrammetry monitoring, simultaneous adjustment, statistical analysis and space intersection, resection, program, project

Download Report:

Abstract:
This report presents the results of a pilot study to determine the utility of developing a particular travel forecasting technique. The technique in question is a gravity-based model which requires ramp volume data as inputs. The model is used to forecast ramp-to-ramp trip tables. The preliminary study indicates that this technique is sufficiently accurate to warrant furthur investigation.

Authors:
Nihan,N. L.

Keywords:
data, forecasting, freeway, model, Ramp-to-Ramp trips, freeway trip tables, trip distribution, traffic volumes, travel patterns, gravity model, travel, volume

Download Report:

Abstract:
The pavement structure of SR 12 between Montesano and Elma, Washington was evaluated for the proposed heavy loads associated with construction of the Satsop power plant. Information used in evaluating SR-12 resulted from two sources which included field studies conducted by the Washington State Department of Transportation and development of various material strength parameters by the University of Washington. These data were used to model the pavement structure as a layered elastic system. By use of this analysis procedure, the stresses, strains, and deflections were estimated for the expected range of loading conditions. The results indicate that the most probable amount of damage (fatigue and rutting) expected for the non-cement treated base structural sections is less that one to two percent of available pavement life for the "expected" loading condition. An increase in either or both the trailer wheel load and pavement temperature will act to produce greater losses in pavement life. It is estimated that the tensile stresses in the cement treated base may exceed the tensile strength of this material.

Authors:
Mahoney,J. P., Tsunetta,Jerrold Y., Terrel,Ronald L.

Keywords:
analysis, base, condition, construction, damage, data, development, fatigue, highway, loads, materials, model, pavement, Pavement Evaluation, Materials Characterization, Layered Elastic System, Failure Criteria, Heavy Loads, pavement life, pavement temperature, strains, strength, stresses, System, temperature, transportation, Washington, Washington state, wheel load

Download Report:

Abstract:
Oblique wall noise barriers were investigated for angular dependence of attenuation. Experiments with a model at 5 kHz showed less than 1 dB difference from normal incidence to 45O incidence. Variations may approach 2 dB at angles near 70\' from normal incidence. Thus, the obliqueness of the wall may be neglected for most practical problems.

Authors:
Foss,R. N.

Keywords:
attenuation, barrier, barriers, Fresenel diffraction, Highway acoustics, model, noise, noise barriers, noise screens

Download Report:

Abstract:
At the request of the Washington State Department of Highways a study was conducted to evaluate three computer models specifically designed to predict carbon monoxide concentration at receptor points along roadways. The models were evaluated on their ability to predict values obtained from a monitoring network established along various roadways in the State of Washington. Monitoring consisted of 12 ground level CO stations, meteorological stations and traffic counters. Traffic speeds were sampled for conformity during peak hours. The final selected models, CALINE and EPA's HIWAY were given calibration factors to be used when calculating Receptor Concentrations for Impact Assessments.

Authors:
Badgley,Franklin, Rossana,T. August, Alsid,Hal F., Lutrick,David

Keywords:
air pollution, air quality, Assessment, calibration, carbon monoxide, computer, Computer Modelin, Concentrations, highway, Highways, impact, model, models, monitoring, quality, roadway, speed, traffic, Transportation Pollution Source, Washington, Washington state

Download Report:

Abstract:
Federal and State laws require highway departments to prepare statements assessing the impact that proposed highway improvements or construction may have on the environment. An important consideration in the preparation of an impact statement is the anticipated effect the proposed activity will have on air quality since highway transportation is a source of several major air pollutants: particulate matter, nitrogen oxides, carbon monoxide, hydrocarbons, and photochemical oxidants which are formed in the atmosphere in the presence of sunlight. Comprehensive physical studies to predict the air quality impact at proposed sites are generally prohibitive due to the time required to obtain suitable data, the cost of such studies and the number of impact statements that must be considered by most highway departments.Methods have been developed to predict the air quality impact of new highway construction through the use of mathematical atmospheric diffusion models. Once they are properly calibrated these models can be used to test alternative locations and designs. Basically models use meteorological conditions and emission rates to predict downwind concentrations as illustrated in Figure 1.The principal objective of this research project has been to conduct a search of the literature to identify state-of-the-art air quality predictive schemes applicable to motor vehicle transportation. The available models have been analyzed in detail and evaluated in terms of selected characteristics that serve to describe the predictive capabilities of each. Limitations in the models have also been noted where appropriate.Section 2.0 o f this report describes the methods used in conducting the research. Sections 3.0 and 4.0 present the models analyzed and a general discussion of applicability, in both narrative and tabular form. Section 5.0 summarizes the study and presents the recommendations for future consideration.

Authors:
Rossano,A. T., Lamb,Donna V., Badgley,Franklin

Keywords:
air quality, Alternative, carbon monoxide, Concentrations, condition, construction, cost, data, design, environment, highway, highway construction, Highways, hydrocarbons, impact, model, modeling, models, nitrogen, particulate matter, Pollutants, quality, research, state-of-the-art, transportation, Washington, Washington state

Download Report:

Abstract:
Semi-analytical, analytical, and analogical aerotriangulation methods, procedures, instructions, and recommendations are explained in detail.Acceptable accuracies, required technical operator skill, operational time requirements, and instructions for adoption of semi-analytical aerotriangulation into the Photogrammetric Department are shown. Computer programs for space resection, linear transformation, and model connection procedures are included.

Authors:
Hou,Cheng-Yeh

Keywords:
Aerotriangulation, computer, computer program, highway, Highways, model, program, Semi-analytical, analytical, analogical, linear transformation, lens distortion, film distortion, space resection, level method

Download Report:

Abstract:
The Impulse Index as a measure of pavement condition was previously described in a report of the Research Division of Washington State University entitled, "Pavement Deflection Measurement - Dynamic-A Feasibility Study, Final Report, June 1970," by Frank W. Brands, P. E. and John C. Cook, P. E.Implementation of automatic data acquisition using impulse testing requires the development of a mechanical device to set an instrument package on the pavement, deliver an impulse of energy, and retrieve the instrument package. This is to be done automatically with the vehicle proceeding down the highway. This report describes a test model built to facilitate the determination of data necessary for design of a prototype vehicle.

Authors:
Brands,F., Cook,C. J.

Keywords:
condition, data, design, development, Energy, highway, impulse index, index, model, pavement, pavement deflection, research, Washington, Washington state

Download Report:

Abstract:
Alternatives to control wastewater odors on board Washington State ferries and during discharge of the wastewater to sewerage systems were formulated, evaluated and tested.Holding tank aeration, using compressed air injection to a recycle line is an effective method. Sulfide is microbially oxidized, and anaerobic sulfate reducing bacteria are suppressed. Engineering and lab studies and a simulation model of the process were used to estimate suitable design parameters and costs. A prototype installation is recommended for optimization of operation. The addition of slug dosages of H202 was also found to be effective in laboratory and on-board vessels. The twice daily dose of about 50 mg/ should be stirred into the holding tank using recycle mixing. Peroxide was found to oxidize sulfide, increase dissolved oxygen and suppress sulfate reducing bacteria. Bottom suction sludge hoppers must be installed to prevent accumulation of sludge in tank bottom.Other alternatives, including chlorine addition, pH increase, iron sulfide precipitation and toxic odor control compounds, were found ineffective and/or uneconomic.Other finds are that sulfide is produced primarily from reduction of sulfates from the saltwater flushing water. Production is primarily in the slime layer on the bottom and sides of the holding tanks. On-shore force mains are sites of sulfide production during stagnant periods between tank pumpouts. These force mains should tanks was evaluated for hydraulic, organic loading, and salt toxicity effects on existing and planned sewage plants. No significant impacts were found.

Authors:
Sylvester,R. O., Ferguson,J. F., Parish,K. B., Brown,D. W., Leuelid,S.

Keywords:
control, cost, costs, design, disposal, dissolved oxygen, effects, ferries, ferry, impact, impacts, line, Marine wastewater holding tanks, odor control, wastewater aeration, hydrogen peroxide, model, Precipitation, salt, sewerage, Study, System, systems, Toxicity, vessel, vessels, Washington, Washington state

Download Report:

Abstract:
At the request of the Washington Department of Highways two studies have been conducted by a team of specialists at the University of Washington Air Resources Program to determine the applicability of the Acoustic Radar to air quality modeling to mobile sources.At the request of the Washington Department of Highways two studies have been conducted by a team of specialists at the University of Washington Air Resources Program to determine the applicability of the Acoustic Radar to air quality modeling of mobile sources. Following an exploratory investigation, a comprehensive study was undertaken in which the atmospheric structure was measured by a modified Monostatic Acoustic Radar and the derived stability conditions were compared with the commonly used Pasquill-Turner stability classes, which are based on empirical data. This comprehensive study was performed over a three month period in the fall of 1976, when an unusually persistent air stagnation existed in the study area caused by a stationary high pressure system over the entire Northwest.The Evergreen Point Floating Bridge Toll Plaza in Bellevue, Washington was selected for test location.The carbon monoxide (CO) concentrations were measured at six strategically located sampling points and then compared with the computer model predictions utilizing atmospheric stability data derived by both the Pasquill-Turner and the Radar echo methods. The results indicated that the Acoustic Radar method of determining D & E stability classes is a more realistic approach than that of the Pasquill-Turner Method. Furthermore, the Radar method can also provide continuous remote sensing and recordings of atmospheric parameters. The variation of the inversion height, as measured by the Radar echoes has shown a reasonably good correlation with the variation of the measured CO concentration.

Authors:
Rossano,A. T., Badgley,F. I., Juhasz,P. C., Bang,G., Carsey,F.

Keywords:
Acoustic Radar, air pollution, air quality, Air Quality Modeling, bridge, carbon monoxide, Carbon Monoxide Perdictions, computer, Concentrations, condition, data, floating bridge, highway, Highways, ITS, model, modeling, prediction, pressure, program, quality, remote sensing, Remote Sensing Atmospheric Structur, sampling, stability, Transportation Pollutio, Washington

Download Report: