TRAC Reports
To sort the reports, click on a heading: Authors, Report #, Report Title, Year, or Publisher.
To download a report's pdf or see the abstract, click on the report.
Search returned 40 reports containing keyword: 'control'
clear results
| Previous |
Search
|
Next |
| Authors |
Report # |
Report Title |
Year |
Publisher |
|---|
| Collins,B. M. | WA-RD 595.1 | The Long-Term Performance of Geotextile Separators, Bucoda Test Site--Phase III | 2004 | TRAC/UW |
Abstract:
This research was Phase III of field investigations carried out over 12 years at a test section in southwest Washington State in an effort to quantify the contribution of geotextile separators to the long-term performance of pavement sections. Five different geotextile separators, as well as a control (soil-only) section, were installed in a test section covering two lanes with different base course thicknesses on a low volume but heavily loaded rural highway west of Bucoda, Wash. Phase I evaluated the performance of the separators during construction. Phases II and III were conducted to evaluate the performance of the separators 5 and 12 years after construction, respectively. Field and laboratory tests were conducted on the subgrade, granular base materials, and the geotextiles as part of the effort to correlate the performance of the pavement section to the presence of the geotextile separators. Falling weight deflectometer (FWD) testing was also performed at the site as part of the effort to quantify the performance of the pavement section. The laboratory tests indicated that the geotextiles successfully performed their separation function over the 12-year period. However, the soil-only sections had a minimal amount of intermixing at the base course/subgrade interface, indicating that the separation benefits of geotextiles may not be realized under relatively thick pavement sections. Field density tests indicated that the density of the subgrade in the sections with a geotextile generally increased between construction and the first field investigation, whereas the density of the soil-only sections remained about the same. Similarly, the FWD tests showed that the most significant increase in the subgrade moduli occurred in the first few months following construction. However, the soil-only sections exhibited behavior similar to the sections with geotextiles during the FWD testing, suggesting that for the relatively thick pavement sections, incorporation of geotextiles may not have provided a significant contribution to the overall performance of the section over the 12-year period. Some of the FWD results did suggest that geotextiles might contribute to an increase in the base course modulus over time.
Authors:
Collins,B. M., Holtz,R. D.
Keywords:
base, behavior, benefit, benefits, construction, control, density, falling weight deflectometer, field investigations, geotextile, geotextile separators, highway, materials, moduli, pavement, pavement performance, pavement section, research, rural, separators, subgrade, tests, volume, Washington, Washington state, weight, performance
This research was Phase III of field investigations carried out over 12 years at a test section in southwest Washington State in an effort to quantify the contribution of geotextile separators to the long-term performance of pavement sections. Five different geotextile separators, as well as a control (soil-only) section, were installed in a test section covering two lanes with different base course thicknesses on a low volume but heavily loaded rural highway west of Bucoda, Wash. Phase I evaluated the performance of the separators during construction. Phases II and III were conducted to evaluate the performance of the separators 5 and 12 years after construction, respectively. Field and laboratory tests were conducted on the subgrade, granular base materials, and the geotextiles as part of the effort to correlate the performance of the pavement section to the presence of the geotextile separators. Falling weight deflectometer (FWD) testing was also performed at the site as part of the effort to quantify the performance of the pavement section. The laboratory tests indicated that the geotextiles successfully performed their separation function over the 12-year period. However, the soil-only sections had a minimal amount of intermixing at the base course/subgrade interface, indicating that the separation benefits of geotextiles may not be realized under relatively thick pavement sections. Field density tests indicated that the density of the subgrade in the sections with a geotextile generally increased between construction and the first field investigation, whereas the density of the soil-only sections remained about the same. Similarly, the FWD tests showed that the most significant increase in the subgrade moduli occurred in the first few months following construction. However, the soil-only sections exhibited behavior similar to the sections with geotextiles during the FWD testing, suggesting that for the relatively thick pavement sections, incorporation of geotextiles may not have provided a significant contribution to the overall performance of the section over the 12-year period. Some of the FWD results did suggest that geotextiles might contribute to an increase in the base course modulus over time.
Authors:
Collins,B. M., Holtz,R. D.
Keywords:
base, behavior, benefit, benefits, construction, control, density, falling weight deflectometer, field investigations, geotextile, geotextile separators, highway, materials, moduli, pavement, pavement performance, pavement section, research, rural, separators, subgrade, tests, volume, Washington, Washington state, weight, performance
|
http://www.wsdot.wa.gov/research/reports/fullreports/595.1.pdf http://wsdot.wa.gov/Research/Reports/500/595.1.htm |
| Avery,R. P. | WA-RD 563.1 | Central Puget Sound Freeway Network Usage and Performance, 2001 Update | 2003 | TRAC/UW |
Abstract:
This summary report presents an overview of the level of traveler usage (e.g., how many vehicles use the freeways) and travel performance (e.g., how fast they are traveling, where and how often congestion ocurs) on the principal urban freeways in the central Puget Sound area. The freeways studied in this project are managed by the Washington State Department of Transportation (WSDOT) using its FLOW system, a coordinated network of traffic monitoring, measuring, information dissemination, and control devices that operates on urban state and Interstate highways in the central Puget Sound region. Data presented in this report were collected by the WSDOT's freeway surveillance system. The project that led to this report is intended to meet two separate purposes: 1) to enhance WSDOT's ability to monitor and improve its traffic management efforts on Seattle-area highways, and 2) to provide useful information to the public and decision makers about the status of the freeway system's operational performance. This report is primarily intended to meet the second of these objectives. However, the software developed to assist in freeway data analysis for this project and many of the graphics presented in this report are directly applicable to the first objective.
Authors:
Avery,R. P., Ishimaru,J. M., Nee,J., Hallenbeck,M. E.
Keywords:
analysis, Archived Data User Services (ADUS), congestion, congestion monitoring, control, data, flow, freeway, freeway performance, highway, information dissemination, ITS, management, monitoring, performance, public, research, surveillance, traffic, traffic management, traffic monitoring, transportation, urban, Washington, Washington state, WSDOT
This summary report presents an overview of the level of traveler usage (e.g., how many vehicles use the freeways) and travel performance (e.g., how fast they are traveling, where and how often congestion ocurs) on the principal urban freeways in the central Puget Sound area. The freeways studied in this project are managed by the Washington State Department of Transportation (WSDOT) using its FLOW system, a coordinated network of traffic monitoring, measuring, information dissemination, and control devices that operates on urban state and Interstate highways in the central Puget Sound region. Data presented in this report were collected by the WSDOT's freeway surveillance system. The project that led to this report is intended to meet two separate purposes: 1) to enhance WSDOT's ability to monitor and improve its traffic management efforts on Seattle-area highways, and 2) to provide useful information to the public and decision makers about the status of the freeway system's operational performance. This report is primarily intended to meet the second of these objectives. However, the software developed to assist in freeway data analysis for this project and many of the graphics presented in this report are directly applicable to the first objective.
Authors:
Avery,R. P., Ishimaru,J. M., Nee,J., Hallenbeck,M. E.
Keywords:
analysis, Archived Data User Services (ADUS), congestion, congestion monitoring, control, data, flow, freeway, freeway performance, highway, information dissemination, ITS, management, monitoring, performance, public, research, surveillance, traffic, traffic management, traffic monitoring, transportation, urban, Washington, Washington state, WSDOT
|
|
http://www.wsdot.wa.gov/research/reports/fullreports/563.1.pdf http://wsdot.wa.gov/Research/Reports/500/563.1.htm |
| Ishimaru,J. M. | WA-RD 555.1 | North Seattle Advanced Traffic Management System (NSATMS) Project Evaluation | 2002 | TRAC/UW |
Abstract:
This report documents the findings of the evaluation of the North Seattle Advanced Traffic Management System (NSATMS) Project. The evaluation was originally designed to analyze the potential transportation benefits and costs of a regional arterial traffic data sharing system that would obtain traffic signal system information (volumes, signal timing plans, etc.) from participating agencies and then share the data among those agencies. The operational goal was to allow each agency to make better control decisions by providing it with real-time knowledge of traffic conditions outside of its own control system boundaries. Because of a series of technical and project management issues, the system as originally envisioned was not successfully implemented. As a result, this evaluation does not include an analysis of direct operational benefits. It does, however, include a discussion of the expected institutional benefits, as well as an extensive "lessons learned" section based on the project team's review of the NSATMS effort. Of particular note were the importance of effective and ongoing lines of project communication, and the critical need to properly evaluate the fundamental nature of the project and provide a well-matched project management structure. The lessons learned from this project provide instructive guidelines for those who are contemplating future ITS system development efforts of comparable scope and complexity. Despite the limited successes of the NSATMS effort, the evaluation team found continued support for the regional arterial ATMS concept within the Puget Sound region. Follow-on research that contributes to a better understanding of the benefits, costs, and technical requirements of an arterial traffic management system is desired by many of the project participants.
Authors:
Ishimaru,J. M., Hallenbeck,M. E.
Keywords:
intelligent transportation systems, advanced traffic management systems, arterial signal control systems, traffic control strategies, Archived Data User Services (ADUS), data sharing, evaluation, seattle, advanced traffic management systems, traffic, traffic management, management, management system, transportation, transportation benefit, benefits, benefit, costs, cost, arterial, traffic data, data, volume, control, condition, ITS, project management, analysis, line, development, ATMS, research
This report documents the findings of the evaluation of the North Seattle Advanced Traffic Management System (NSATMS) Project. The evaluation was originally designed to analyze the potential transportation benefits and costs of a regional arterial traffic data sharing system that would obtain traffic signal system information (volumes, signal timing plans, etc.) from participating agencies and then share the data among those agencies. The operational goal was to allow each agency to make better control decisions by providing it with real-time knowledge of traffic conditions outside of its own control system boundaries. Because of a series of technical and project management issues, the system as originally envisioned was not successfully implemented. As a result, this evaluation does not include an analysis of direct operational benefits. It does, however, include a discussion of the expected institutional benefits, as well as an extensive "lessons learned" section based on the project team's review of the NSATMS effort. Of particular note were the importance of effective and ongoing lines of project communication, and the critical need to properly evaluate the fundamental nature of the project and provide a well-matched project management structure. The lessons learned from this project provide instructive guidelines for those who are contemplating future ITS system development efforts of comparable scope and complexity. Despite the limited successes of the NSATMS effort, the evaluation team found continued support for the regional arterial ATMS concept within the Puget Sound region. Follow-on research that contributes to a better understanding of the benefits, costs, and technical requirements of an arterial traffic management system is desired by many of the project participants.
Authors:
Ishimaru,J. M., Hallenbeck,M. E.
Keywords:
intelligent transportation systems, advanced traffic management systems, arterial signal control systems, traffic control strategies, Archived Data User Services (ADUS), data sharing, evaluation, seattle, advanced traffic management systems, traffic, traffic management, management, management system, transportation, transportation benefit, benefits, benefit, costs, cost, arterial, traffic data, data, volume, control, condition, ITS, project management, analysis, line, development, ATMS, research
|
|
http://www.wsdot.wa.gov/research/reports/fullreports/555.1.pdf http://wsdot.wa.gov/Research/Reports/500/555.1.htm |
| Dailey,D. J. | WA-RD 537.1 | A Cellular Automata Model for Use with Real Freeway Data | 2002 | TRAC/UW |
Abstract:
The exponential rate of increase in freeway traffic is expanding the need for accurate and realistic methods to model and predict traffic flow. Traffic modeling and simulation facilitate an examination of both microscopic and macroscopic views of traffic flows and are therefore considered one of the most important analytical tools in traffic engineering. This report presents a cellular automata model for traffic flow simulation and prediction (CATS). Cellular automata models quantize complex behavior into simple individual components. In this model, the freeway being simulated is discretized into homogeneous cells of equal length, and time is discretized into timesteps of equal duration. The CATS model allows users to define locations within the road topology where volume and density data will be calculated so that the model results can be compared to observed highway data.
Authors:
Dailey,D. J., Taiyab,N.
Keywords:
cellular automata, traffic modeling, dynamic simulation, prediction, control, ramp metering, research
The exponential rate of increase in freeway traffic is expanding the need for accurate and realistic methods to model and predict traffic flow. Traffic modeling and simulation facilitate an examination of both microscopic and macroscopic views of traffic flows and are therefore considered one of the most important analytical tools in traffic engineering. This report presents a cellular automata model for traffic flow simulation and prediction (CATS). Cellular automata models quantize complex behavior into simple individual components. In this model, the freeway being simulated is discretized into homogeneous cells of equal length, and time is discretized into timesteps of equal duration. The CATS model allows users to define locations within the road topology where volume and density data will be calculated so that the model results can be compared to observed highway data.
Authors:
Dailey,D. J., Taiyab,N.
Keywords:
cellular automata, traffic modeling, dynamic simulation, prediction, control, ramp metering, research
|
|
http://www.wsdot.wa.gov/research/reports/fullreports/537.1.pdf http://wsdot.wa.gov/Research/Reports/500/537.1.htm |
| Wetherby,B. | WA-RD 462.6 | SWIFT - Evaluation Summary | 1999 |
Abstract:
The SWIFT (Seattle Wide-area for Travelers) project was a field operational test of a wide area ITS communications system using a flexible FM sub-carrier High Speed Data System (HSDS). The test was conducted in a partnership with WSDOT, King County Metro Transit, Delco Electronics, Inc., IBM, Seiko Communications Systems, Metro Traffic Control and the Federal Highway Administration. Three devices were used, by the public, to receive the traveler a Delco car radio (capable of providing vector navigation in addition to personal paging and the messages); a Seiko wrist watch pager; and a portable computer (capable of providing graphic displays of traffic advisories and bus positions). After the 15-month test, interviews with the 600 Seattle commuters/participants were conducted to assess user acceptance. A communications study evaluated the adequacy of the HSDS system to disseminate traveler information. Architecture study assessed the effectiveness of the various components to carry out SWIFT operations. institutional issues study documented the history of the project and assessed the institutional issues confronted. A deployment cost study investigated the cost of deployment of a SWIFT system and assessment of potential profitability. The first five reports in this series detail individual aspects of the project.
Authors:
Wetherby,B., Perez,W.
Keywords:
Acceptance, Assessment, bus, computer, control, cost, counties, data, Deployment, effectiveness, evaluation, highway, Institutional, interviews, Issues, ITS, Miscellaneous Library, paging, portable computer, project, public, seattle, speed, Study, SWIFT, System, systems, traffic, traffic advisories, traffic control, transit, traveler information, WSDOT
The SWIFT (Seattle Wide-area for Travelers) project was a field operational test of a wide area ITS communications system using a flexible FM sub-carrier High Speed Data System (HSDS). The test was conducted in a partnership with WSDOT, King County Metro Transit, Delco Electronics, Inc., IBM, Seiko Communications Systems, Metro Traffic Control and the Federal Highway Administration. Three devices were used, by the public, to receive the traveler a Delco car radio (capable of providing vector navigation in addition to personal paging and the messages); a Seiko wrist watch pager; and a portable computer (capable of providing graphic displays of traffic advisories and bus positions). After the 15-month test, interviews with the 600 Seattle commuters/participants were conducted to assess user acceptance. A communications study evaluated the adequacy of the HSDS system to disseminate traveler information. Architecture study assessed the effectiveness of the various components to carry out SWIFT operations. institutional issues study documented the history of the project and assessed the institutional issues confronted. A deployment cost study investigated the cost of deployment of a SWIFT system and assessment of potential profitability. The first five reports in this series detail individual aspects of the project.
Authors:
Wetherby,B., Perez,W.
Keywords:
Acceptance, Assessment, bus, computer, control, cost, counties, data, Deployment, effectiveness, evaluation, highway, Institutional, interviews, Issues, ITS, Miscellaneous Library, paging, portable computer, project, public, seattle, speed, Study, SWIFT, System, systems, traffic, traffic advisories, traffic control, transit, traveler information, WSDOT
|
|
| Muench,S. T. | WA-RD 476.2 | Evaluation Of The Transtech Pavement Quality Indicator | 1999 |
Abstract:
Recently, WSDOT acquired a non-nuclear, non-destructive, density measuring device manufactured by TransTech called a Pavement Quality Indicator (PQI). TransTech's PQI measures pavement density indirectly by measuring its dielectric constant. A non-nuclear gauge is advantageous because it contains no radioactive source and is therefore not subject to radiological controls, and it can obtain readings in about 5 seconds versus to 4 minutes with a nuclear gauge. Currently, TransTech is collecting data from different agencies to determine the suitability for measuring asphalt pavement density. This brief study presents density measurements from PQI and compares them with nuclear density gauge and core density measurements from three WSDOT 1998 paving projects. This evaluation was a secondary study to 1998 study Asphalt Concrete Temperature in Washington State; therefore this study's experimental design was based entirely on the Temperature study requirements, which resulted in non-random samples and multiple populations within the same sample groups. Despite these problems, results indicate that, when averaged, PQI readings compare favorably with both nuclear measurements and core measurements.
Authors:
Muench,S. T., Mahoney,J. P., Cawley,B.
Keywords:
agencies, asphalt, asphalt concrete, asphalt pavement, concrete, control, core densities, data, density, design, evaluation, experimental, group, indicator, ITS, nuclear gauge, pavement, pavement quality, pavement quality indicator, population, project, quality, Study, temperature, Washington, Washington state, WSDOT
Recently, WSDOT acquired a non-nuclear, non-destructive, density measuring device manufactured by TransTech called a Pavement Quality Indicator (PQI). TransTech's PQI measures pavement density indirectly by measuring its dielectric constant. A non-nuclear gauge is advantageous because it contains no radioactive source and is therefore not subject to radiological controls, and it can obtain readings in about 5 seconds versus to 4 minutes with a nuclear gauge. Currently, TransTech is collecting data from different agencies to determine the suitability for measuring asphalt pavement density. This brief study presents density measurements from PQI and compares them with nuclear density gauge and core density measurements from three WSDOT 1998 paving projects. This evaluation was a secondary study to 1998 study Asphalt Concrete Temperature in Washington State; therefore this study's experimental design was based entirely on the Temperature study requirements, which resulted in non-random samples and multiple populations within the same sample groups. Despite these problems, results indicate that, when averaged, PQI readings compare favorably with both nuclear measurements and core measurements.
Authors:
Muench,S. T., Mahoney,J. P., Cawley,B.
Keywords:
agencies, asphalt, asphalt concrete, asphalt pavement, concrete, control, core densities, data, density, design, evaluation, experimental, group, indicator, ITS, nuclear gauge, pavement, pavement quality, pavement quality indicator, population, project, quality, Study, temperature, Washington, Washington state, WSDOT
| Anderson,K. W. | WA-RD 199.1 | 69th Annual TRB Meeting | 1999 |
Abstract:
This annual meeting covered a wide variety of transportation issues. Bridge and Design issues were discussed, material and pavement specification, as well as strategic planning and traffic control.
Authors:
Anderson,K. W.
Keywords:
69th, Annual, bridge, control, design, Meeting, pavement, planning, specification, strategic planning, traffic, traffic control, transportation, TRB
This annual meeting covered a wide variety of transportation issues. Bridge and Design issues were discussed, material and pavement specification, as well as strategic planning and traffic control.
Authors:
Anderson,K. W.
Keywords:
69th, Annual, bridge, control, design, Meeting, pavement, planning, specification, strategic planning, traffic, traffic control, transportation, TRB
|
|
| Cohn,L. F. | WA-RD 304.1 | Special Noise Barrier Applications | 1993 |
Abstract:
This report summarizes an investigation of the technical aesthetic, and economic feasibilities of incorporating special noise barrier applications into a highway noise control program. The intent of the report is to take as a starting point the thin, vertical, reflective barrier now used in most applications. Special barrier applications are those beyond the thin vertical reflective barrier.The investigation of technical feasibility relates to the formulation of the effects of absorptive treatments, slanted tops, T-tops, and other special applications. The economic and aesthetic feasibility investigations examine the value of employing these special applications in lieu of thin, vertical, reflective barriers. The research reported on herein was performed on behalf of the Washington State Department of Transportation. The intent of the was for background studies of the effects of special treatments, so the could be in a position to implement pilot projects at a later date.
Authors:
Cohn,L. F., Harris,R. A.
Keywords:
absorption, absorptive, applications, barrier, barriers, control, highway, Insertion Loss, noise, parallel barrier, program, project, research, transportation, Washington, Washington state
This report summarizes an investigation of the technical aesthetic, and economic feasibilities of incorporating special noise barrier applications into a highway noise control program. The intent of the report is to take as a starting point the thin, vertical, reflective barrier now used in most applications. Special barrier applications are those beyond the thin vertical reflective barrier.The investigation of technical feasibility relates to the formulation of the effects of absorptive treatments, slanted tops, T-tops, and other special applications. The economic and aesthetic feasibility investigations examine the value of employing these special applications in lieu of thin, vertical, reflective barriers. The research reported on herein was performed on behalf of the Washington State Department of Transportation. The intent of the was for background studies of the effects of special treatments, so the could be in a position to implement pilot projects at a later date.
Authors:
Cohn,L. F., Harris,R. A.
Keywords:
absorption, absorptive, applications, barrier, barriers, control, highway, Insertion Loss, noise, parallel barrier, program, project, research, transportation, Washington, Washington state
|
|
| Allison,R. E. | WA-RD 130.2 | PlusRide Asphalt Pavement (I/90) | 1990 |
Abstract:
The performance of an experimental installation of PlusRide ACP as a bridge deck overlay is summarized in this report. Visual inspections, friction tests, noise readings, and rut depth measurements were taken on both the PlusRide and a rubberized ACP control section. No evidence of better frictional properties, noise reduction or increased service life could be attributed to the PlusRide in comparison with the rubberized ACP control section.
Authors:
Allison,R. E.
Keywords:
asphalt, asphalt pavement, bridge, bridge deck, bridge deck overlay, control, Deck, experimental, friction, inspection, noise, noise reduction, overlay, pavement, performance, PlusRide, resistance, Rubberized, tests
The performance of an experimental installation of PlusRide ACP as a bridge deck overlay is summarized in this report. Visual inspections, friction tests, noise readings, and rut depth measurements were taken on both the PlusRide and a rubberized ACP control section. No evidence of better frictional properties, noise reduction or increased service life could be attributed to the PlusRide in comparison with the rubberized ACP control section.
Authors:
Allison,R. E.
Keywords:
asphalt, asphalt pavement, bridge, bridge deck, bridge deck overlay, control, Deck, experimental, friction, inspection, noise, noise reduction, overlay, pavement, performance, PlusRide, resistance, Rubberized, tests
|
|
http://wsdot.wa.gov/Research/Reports/100/130.2.htm |
| Roper,T. H. | WA-RD 148.1 | Thin Overlay- Yakima River Bridge - Experimental Feature | 1989 |
Abstract:
The Washington State Department of Transportation will be conducting experimental field testing of several selected polymer concrete thin (1/4 inch) overlays over a ten-year period. The polymer concrete material is manufactured by private industry firms and installed on selected bridge decks under standard WSDOT construction contracts. Approximately 21 bridges will be involved in the experiment; eight of these are included in federal participating projects as experimental features.Washington State Department of Transportation will be conducting experimental field testing of several selected polymer concrete thin (1/4inch) overlays over a ten-year period. The polymer concrete material is manufactured by private industry and installed on selected bridge decks under standard WSDOT construction 21 bridges will be involved in the experiment; eight of these are included in federal participating projects as features. The polymer concrete thin overlays were applied to the decks of the River Bridge and the Yakima River Bridge under Contract No. 3 SR 90 and SR 82, Interchange to Terrace Heights. Both bridges are steel truss bridges located on SR 82 just outside Yakima, Washington. Both the epoxy overlay and the methacrylate overlays were versatile products apply under difficult traffic control conditions. Starting and stopping the various pours to accommodate opening and closing of lanes for traffic proved satisfactory. To the extent possible, work was performed at night when traffic was light. All three lanes were then opened to traffic in the early morning to accommodate peak traffic conditions.
Authors:
Roper,T. H., Henley,E. H. Jr
Keywords:
bridge, bridge deck, bridge deck repairs, bridge decks, bridges, concrete, condition, construction, contracts, control, Deck, Epoxy, experimental, lanes, light, overlay, overlays, polymer, polymer concrete, steel, steel truss bridge, thin overlay, traffic, traffic control, transportation, Washington, Washington state, WSDOT
The Washington State Department of Transportation will be conducting experimental field testing of several selected polymer concrete thin (1/4 inch) overlays over a ten-year period. The polymer concrete material is manufactured by private industry firms and installed on selected bridge decks under standard WSDOT construction contracts. Approximately 21 bridges will be involved in the experiment; eight of these are included in federal participating projects as experimental features.Washington State Department of Transportation will be conducting experimental field testing of several selected polymer concrete thin (1/4inch) overlays over a ten-year period. The polymer concrete material is manufactured by private industry and installed on selected bridge decks under standard WSDOT construction 21 bridges will be involved in the experiment; eight of these are included in federal participating projects as features. The polymer concrete thin overlays were applied to the decks of the River Bridge and the Yakima River Bridge under Contract No. 3 SR 90 and SR 82, Interchange to Terrace Heights. Both bridges are steel truss bridges located on SR 82 just outside Yakima, Washington. Both the epoxy overlay and the methacrylate overlays were versatile products apply under difficult traffic control conditions. Starting and stopping the various pours to accommodate opening and closing of lanes for traffic proved satisfactory. To the extent possible, work was performed at night when traffic was light. All three lanes were then opened to traffic in the early morning to accommodate peak traffic conditions.
Authors:
Roper,T. H., Henley,E. H. Jr
Keywords:
bridge, bridge deck, bridge deck repairs, bridge decks, bridges, concrete, condition, construction, contracts, control, Deck, Epoxy, experimental, lanes, light, overlay, overlays, polymer, polymer concrete, steel, steel truss bridge, thin overlay, traffic, traffic control, transportation, Washington, Washington state, WSDOT
|
|
| Livingston,J. | WA-RD 198.1 | Carbon Black Additive in Asphalt, SR 290, Spokane Vicinity | 1989 |
Abstract:
This report describes the construction of an experimental section of asphalt concrete pavement overlay which contained the additive carbon black. A long term evaluation of the overlay seeks to determine if there is a significant difference in performance between it and an adjacent control section of pavement which contains no additive.Preliminary laboratory results indicate that the viscosity/temperature curve for the carbon black asphalt binder has been altered in a way that the temperature susceptibility of the pavement is decreased.
Authors:
Livingston,J.
Keywords:
additive, asphalt, asphalt concrete, Asphalt Concrete pavement, Carbon black, concrete, construction, control, evaluation, experimental, overlay, pavement, performance, susceptibility, temperature, terperature susceptibility
This report describes the construction of an experimental section of asphalt concrete pavement overlay which contained the additive carbon black. A long term evaluation of the overlay seeks to determine if there is a significant difference in performance between it and an adjacent control section of pavement which contains no additive.Preliminary laboratory results indicate that the viscosity/temperature curve for the carbon black asphalt binder has been altered in a way that the temperature susceptibility of the pavement is decreased.
Authors:
Livingston,J.
Keywords:
additive, asphalt, asphalt concrete, Asphalt Concrete pavement, Carbon black, concrete, construction, control, evaluation, experimental, overlay, pavement, performance, susceptibility, temperature, terperature susceptibility
|
|
| Allison,R. E. | WA-RD 185.1 | Rubber Asphalt Binder Stress Absorbing Membrane Interlayer - Experimental Feature WA 78-06 & 07 | 1989 |
Abstract:
Experimental installation of rubber-asphalt binder stress absorbing membrane interlayers were evaluated for their ability to delay or prevent reflective alligator cracking. The final results are inconclusive in that after 10 years of service life neither the control sections paved without an interlayer or the remainder of the projects paved with the interlayer have shown any reflective alligator cracking. It is suspected that the thickness of the overlay in combination with the sound structure of the underlying pavement has masked any of the benefits of the interlayer.
Authors:
Allison,R. E.
Keywords:
Alligator Cracking, asphalt, benefit, benefits, control, cracking, experimental, membrane, overlay, pavement, Reflection Cracking, rubber, Rubber-asphalt, SAMI, stresses
Experimental installation of rubber-asphalt binder stress absorbing membrane interlayers were evaluated for their ability to delay or prevent reflective alligator cracking. The final results are inconclusive in that after 10 years of service life neither the control sections paved without an interlayer or the remainder of the projects paved with the interlayer have shown any reflective alligator cracking. It is suspected that the thickness of the overlay in combination with the sound structure of the underlying pavement has masked any of the benefits of the interlayer.
Authors:
Allison,R. E.
Keywords:
Alligator Cracking, asphalt, benefit, benefits, control, cracking, experimental, membrane, overlay, pavement, Reflection Cracking, rubber, Rubber-asphalt, SAMI, stresses
|
|
http://wsdot.wa.gov/Research/Reports/100/185.1.htm |
| Wyckoff,C. | WA-RD 136.1 | Asphalt Seal Coats - Factors Affecting and Techniques for Obtaining Consistently Good Seal Coats | 1987 |
Abstract:
This is a manual written for those who direct or physically construct asphalt seal coats. The text is based on field experiences. The manual contains: - The reasons for seal coating - Each type of seal coat is discussed as to the purposes of the seal and how it is constructed - Particular emphasis is on chip seals and the factors which can affect obtaining consistently good seal coat. Some of these factors are the weather, the road surface on which the seal is laid, the type of asphalt used, the handling and storage of the asphalt, the choice of cover rock, how to control the uniform distribution and application of the asphalt and rock, the coordination of the seal coat operation, and the post-seal inspection and possible immediate correction. This manual is concise but detailed in the appropriate areas with the liberal use of graphics.
Authors:
Wyckoff,C.
Keywords:
asphalt, chip seal, control, inspection
This is a manual written for those who direct or physically construct asphalt seal coats. The text is based on field experiences. The manual contains: - The reasons for seal coating - Each type of seal coat is discussed as to the purposes of the seal and how it is constructed - Particular emphasis is on chip seals and the factors which can affect obtaining consistently good seal coat. Some of these factors are the weather, the road surface on which the seal is laid, the type of asphalt used, the handling and storage of the asphalt, the choice of cover rock, how to control the uniform distribution and application of the asphalt and rock, the coordination of the seal coat operation, and the post-seal inspection and possible immediate correction. This manual is concise but detailed in the appropriate areas with the liberal use of graphics.
Authors:
Wyckoff,C.
Keywords:
asphalt, chip seal, control, inspection
|
|
| Peters,A. J. | WA-RD 127.1 | Plusride Asphalt Pavement | 1987 |
Abstract:
This is the final report of PlusRide being used as the wearing course on a bridge deck overlay.A Class D Asphalt Concrete pavement which is an open graded friction course was used on an adjacent bridge as a control for the PlusRide. The PlusRide claims were high friction resistance, reduced noise, increased fatigue properties and deicing characteristics. The PlusRide cost 50 percent more that the Class D and the friction resistance, noise levels and fatigue properties were the same for the PlusRide and Class D. The deicing characteristics could not be confirmed due to the absence of surface icing on highways in the Yakima area.
Authors:
Peters,A. J., Schultz,R. L.
Keywords:
asphalt, asphalt concrete, Asphalt Concrete pavement, asphalt pavement, bridge, bridge deck, bridge deck overlay, claims, Class D, concrete, control, cost, Deck, fatigue, friction, highway, Highways, noise, overlay, pavement, PlusRide, resistance
This is the final report of PlusRide being used as the wearing course on a bridge deck overlay.A Class D Asphalt Concrete pavement which is an open graded friction course was used on an adjacent bridge as a control for the PlusRide. The PlusRide claims were high friction resistance, reduced noise, increased fatigue properties and deicing characteristics. The PlusRide cost 50 percent more that the Class D and the friction resistance, noise levels and fatigue properties were the same for the PlusRide and Class D. The deicing characteristics could not be confirmed due to the absence of surface icing on highways in the Yakima area.
Authors:
Peters,A. J., Schultz,R. L.
Keywords:
asphalt, asphalt concrete, Asphalt Concrete pavement, asphalt pavement, bridge, bridge deck, bridge deck overlay, claims, Class D, concrete, control, cost, Deck, fatigue, friction, highway, Highways, noise, overlay, pavement, PlusRide, resistance
|
|
| Peters,A. J. | WA-RD 128.1 | Asphalt-Rubber Binder Stress Absorbing Membrane | 1987 |
Abstract:
This is the final report of an evaluation of an Asphalt-Rubber Binder Stress Absorbing Membrane Interlayer (SAMI) to control transverse, alligator and longitudinal cracking in the asphalt concrete overlay.A control section consisting of a tack coat of CSS-1 applied to the existing pavement was used to compare against the Asphalt-Rubber SAMI and a paving grade asphalt SAMI. Crack mapping for a period of 9 years disclosed the Asphalt-Rubber SAMI to perform slightly better that the paving grade asphalt and much better that the control.
Authors:
Peters,A. J., Schultz,R. L.
Keywords:
asphalt, asphalt concrete, asphalt overlays, Asphalt-Rubber, concrete, control, cracking, evaluation, membrane, overlay, pavement, SAMI, stresses
This is the final report of an evaluation of an Asphalt-Rubber Binder Stress Absorbing Membrane Interlayer (SAMI) to control transverse, alligator and longitudinal cracking in the asphalt concrete overlay.A control section consisting of a tack coat of CSS-1 applied to the existing pavement was used to compare against the Asphalt-Rubber SAMI and a paving grade asphalt SAMI. Crack mapping for a period of 9 years disclosed the Asphalt-Rubber SAMI to perform slightly better that the paving grade asphalt and much better that the control.
Authors:
Peters,A. J., Schultz,R. L.
Keywords:
asphalt, asphalt concrete, asphalt overlays, Asphalt-Rubber, concrete, control, cracking, evaluation, membrane, overlay, pavement, SAMI, stresses
|
|
| Henley,E. H. Jr | WA-RD 104.1 | Effectiveness of Darex Corrosion Inhibitor- Final Concrete Deterioration | 1987 |
Abstract:
Darex Corrosion Inhibitor (DCI) was specified for use in the Dogfish Bay Bridge on SR 308 in Kitsap County. The bridge is a 90-foot long structure located within a tidal zone. The superstructure is an 18-inch deep prestressed concrete slab. Darex Corrosion Inhibitor (DCI) was specified for use in the Dogfish Bay Bridge on SR 308 in County. The bridge is a 90-foot long structure located within a tidal zone. The superstructure is an 18-inch deep prestressed concrete slab. The end piers and two intermediate piers each consist of six 16%-inch prestressed concrete piles. DCI was added to all concrete used in the slab and piles except for four control piles (one in each pier). The supplier, Grace Construction Products, claims that the Calcium Nitrite contained in DCI will, when used as an additive in the recommended dosage, strengthen the passivating film around the reinforcing steel \"making it more resistant to chloride penetration,\" thereby protecting the steel against corrosion. (The process is explained in detail in Appendix A. ) However, only half of the recommended amount of DCI was added to the test sections. At this dosage, DCI appears to be no more effective than standard Portland Cement Concrete in preventing corrosion of the reinforcing steel.
Authors:
Henley,E. H. Jr
Keywords:
additive, bridge, bridges substructure, calcium nitrite, chloride, claims, concrete, construction, control, corrosion, counties, Darex Corrosion Inhibitor, DCI: calcium nitrite, deterioration, effectiveness, piers, piles, portland cement concrete, prestressed, prestressed concrete, reinforcing steel, steel, superstructure
Darex Corrosion Inhibitor (DCI) was specified for use in the Dogfish Bay Bridge on SR 308 in Kitsap County. The bridge is a 90-foot long structure located within a tidal zone. The superstructure is an 18-inch deep prestressed concrete slab. Darex Corrosion Inhibitor (DCI) was specified for use in the Dogfish Bay Bridge on SR 308 in County. The bridge is a 90-foot long structure located within a tidal zone. The superstructure is an 18-inch deep prestressed concrete slab. The end piers and two intermediate piers each consist of six 16%-inch prestressed concrete piles. DCI was added to all concrete used in the slab and piles except for four control piles (one in each pier). The supplier, Grace Construction Products, claims that the Calcium Nitrite contained in DCI will, when used as an additive in the recommended dosage, strengthen the passivating film around the reinforcing steel \"making it more resistant to chloride penetration,\" thereby protecting the steel against corrosion. (The process is explained in detail in Appendix A. ) However, only half of the recommended amount of DCI was added to the test sections. At this dosage, DCI appears to be no more effective than standard Portland Cement Concrete in preventing corrosion of the reinforcing steel.
Authors:
Henley,E. H. Jr
Keywords:
additive, bridge, bridges substructure, calcium nitrite, chloride, claims, concrete, construction, control, corrosion, counties, Darex Corrosion Inhibitor, DCI: calcium nitrite, deterioration, effectiveness, piers, piles, portland cement concrete, prestressed, prestressed concrete, reinforcing steel, steel, superstructure
|
|
| Anderson,K. W. | WA-RD 131.1 | Asphalt-Rubber Open-Graded Friction Course | 1987 |
Abstract:
This report describes the construction of experimental asphalt-rubber open-qraded friction course overlays on I-5 in Vancouver, Washington. A 1200 foot section of open-graded pavement was included as a control section. Evaluations will be conducted over a period of three years to measure the performance of the rubber and polymer sections against the control section of conventional open-graded pavement.Initial observations and tests show no significant differences between the control and the asphalt-rubber and polymer sections.
Authors:
Anderson,K. W.
Keywords:
asphalt, asphalt pavement, Asphalt-Rubber, construction, control, evaluation, experimental, friction, friction course, open-graded, overlay, overlays, pavement, performance, PlusRide, polymer, rubber, tests, Washington
This report describes the construction of experimental asphalt-rubber open-qraded friction course overlays on I-5 in Vancouver, Washington. A 1200 foot section of open-graded pavement was included as a control section. Evaluations will be conducted over a period of three years to measure the performance of the rubber and polymer sections against the control section of conventional open-graded pavement.Initial observations and tests show no significant differences between the control and the asphalt-rubber and polymer sections.
Authors:
Anderson,K. W.
Keywords:
asphalt, asphalt pavement, Asphalt-Rubber, construction, control, evaluation, experimental, friction, friction course, open-graded, overlay, overlays, pavement, performance, PlusRide, polymer, rubber, tests, Washington
|
|
| Anderson,J. L. | WA-RD 147.1 | PlusRide And BoniFibers Evaluation SR 530 Stanwood Vicinity | 1987 |
Abstract:
Asphalt mixes modified with the addition of reclaimed rubber granules (PlusRide) and polyester fibers (BoniFibers) were used in a 0.12-ft overlay of a badly distressed section of AC pavement. The distress consisted of transverse and longitudinal cracking which was reflecting through from the underlying old PCC pavement and severe alligator cracking which was an age related fatigue problem. A section of standard Class B dense graded ACP was also put down to serve as a control section for judging performance.The three sections are to be monitored over a period of three years to determine the effectiveness of the asphalt additive products in preventing the reflection of the distresses noted in the underlying pavementfrom showing through in the overlay. The first year inspection revealed that the PlusRide section was showing some longitudinal cracking over the old PCC lane edge. The BoniFibers section was also showing the same longitudinal distress over the lane edge of the underlying PCC plus a small amount of transverse cracking.
Authors:
Anderson,J. L.
Keywords:
additive, Alligator Cracking, asphalt, asphalt pavement mixtures, Bonifibers, control, cracking, Distress, effectiveness, evaluation, fatigue, inspection, overlay, pavement, PCC, performance, PlusRide, polyester, Polyester Fibers, reflective crack prevention, rubber
Asphalt mixes modified with the addition of reclaimed rubber granules (PlusRide) and polyester fibers (BoniFibers) were used in a 0.12-ft overlay of a badly distressed section of AC pavement. The distress consisted of transverse and longitudinal cracking which was reflecting through from the underlying old PCC pavement and severe alligator cracking which was an age related fatigue problem. A section of standard Class B dense graded ACP was also put down to serve as a control section for judging performance.The three sections are to be monitored over a period of three years to determine the effectiveness of the asphalt additive products in preventing the reflection of the distresses noted in the underlying pavementfrom showing through in the overlay. The first year inspection revealed that the PlusRide section was showing some longitudinal cracking over the old PCC lane edge. The BoniFibers section was also showing the same longitudinal distress over the lane edge of the underlying PCC plus a small amount of transverse cracking.
Authors:
Anderson,J. L.
Keywords:
additive, Alligator Cracking, asphalt, asphalt pavement mixtures, Bonifibers, control, cracking, Distress, effectiveness, evaluation, fatigue, inspection, overlay, pavement, PCC, performance, PlusRide, polyester, Polyester Fibers, reflective crack prevention, rubber
|
|
| Higgins,J. D. | WA-RD 069.1 | Development Of Guidelines For Cuts On Loess Soils | 1985 |
Abstract:
The first phase of a three-phase research investigation of cut slope design criteria for southeastern Washington loess has been completed. A literature review of engineering properties of loess from other locales and design criteria applied by various state transportation departments were conducted. A1so, a preliminary field investigation was made to collect representative soil samples and record failure mechanisms. Past research has revealed that proper drainage control in combination with water content and gradational characteristics, are the primary factors influencing cut slope performance in loessial soils. Analysis of 40 soil samples collected during the field study, demonstrate a close similarity between southeastern Washington loess and deposits from the central United States. Although physical properties are similar, differing climates produce a disparity in failure mechanisms between Midwestern and southeastern Washington loessial deposits.
Authors:
Higgins,J. D., Fragaszy,R. J., Beard,L. D.
Keywords:
analysis, control, criteria, cut slope, design, design criteria, development, drainage, erosion, loess, performance, research, review, slope stability, soil, state-of-the-art, Study, transportation, Washington
The first phase of a three-phase research investigation of cut slope design criteria for southeastern Washington loess has been completed. A literature review of engineering properties of loess from other locales and design criteria applied by various state transportation departments were conducted. A1so, a preliminary field investigation was made to collect representative soil samples and record failure mechanisms. Past research has revealed that proper drainage control in combination with water content and gradational characteristics, are the primary factors influencing cut slope performance in loessial soils. Analysis of 40 soil samples collected during the field study, demonstrate a close similarity between southeastern Washington loess and deposits from the central United States. Although physical properties are similar, differing climates produce a disparity in failure mechanisms between Midwestern and southeastern Washington loessial deposits.
Authors:
Higgins,J. D., Fragaszy,R. J., Beard,L. D.
Keywords:
analysis, control, criteria, cut slope, design, design criteria, development, drainage, erosion, loess, performance, research, review, slope stability, soil, state-of-the-art, Study, transportation, Washington
|
|
| Tai Wik,David Chui | WA-RD 039.12 | Highway Runoff In Washington State: Model Validation And Statistical Analysis 898 | 1982 |
Abstract:
Statewide sampling of highway runoff continued through 1980-81, and the resulting data has been aggregated with that from previous years to further investigate pollutant loadings. Results have validated the solids loading model previously proposed by Asplund (1980) for Western Washington Highways and tentatively extended the model to Eastern Washington. Loading of there pollutants can be predicted from total suspended solids loading using ratios derived from the data. These ratios may be taken as constants at any Washington State location for some pollutants or as linear functions of traffic or other contaminants. Comparison of runoff from a sulfur-extended asphalt pavement with runoff elsewhere indicates higher sulfate loads in the former case. A limited sampling program along an uncurbed highway section observed higher pollutant concentrations from these sections to curbed areas. Sampling of solids adhering to the undercarriage of automobiles produced widely varying results but suggested that vehicles traveling on rural or unpaved roads accumulate significant amounts of solids that can be released on highways. The final year of field sampling will concentrate on improving the loading models, especially for Eastern Washington application, and continuing the sulfur extended asphalt study with a functional control site experiencing the same conditions.
Authors:
Tai Wik,David Chui, Mar,B. W., Horner,R. R.
Keywords:
analysis, asphalt, asphalt pavement, Concentrations, condition, control, data, extended asphalt, highway, highway runoff, Highways, loads, model, models, pavement, pollutant loading, Pollutants, program, runoff, rural, sampling, statistical analysis, sulfur, suspended solids, traffic, Washington, Washington state
Statewide sampling of highway runoff continued through 1980-81, and the resulting data has been aggregated with that from previous years to further investigate pollutant loadings. Results have validated the solids loading model previously proposed by Asplund (1980) for Western Washington Highways and tentatively extended the model to Eastern Washington. Loading of there pollutants can be predicted from total suspended solids loading using ratios derived from the data. These ratios may be taken as constants at any Washington State location for some pollutants or as linear functions of traffic or other contaminants. Comparison of runoff from a sulfur-extended asphalt pavement with runoff elsewhere indicates higher sulfate loads in the former case. A limited sampling program along an uncurbed highway section observed higher pollutant concentrations from these sections to curbed areas. Sampling of solids adhering to the undercarriage of automobiles produced widely varying results but suggested that vehicles traveling on rural or unpaved roads accumulate significant amounts of solids that can be released on highways. The final year of field sampling will concentrate on improving the loading models, especially for Eastern Washington application, and continuing the sulfur extended asphalt study with a functional control site experiencing the same conditions.
Authors:
Tai Wik,David Chui, Mar,B. W., Horner,R. R.
Keywords:
analysis, asphalt, asphalt pavement, Concentrations, condition, control, data, extended asphalt, highway, highway runoff, Highways, loads, model, models, pavement, pollutant loading, Pollutants, program, runoff, rural, sampling, statistical analysis, sulfur, suspended solids, traffic, Washington, Washington state
|
|
| Portele,G. | WA-RD 039.11 | Transport Depostion And Control Of Heavy Metals In Highway Runoff, Interim | 1982 |
Abstract:
The impacts of storm water runoff from Washington State freeways on aquatic ecosystems were investigated through a series of bioassays utilizing algae, zooplankton and fish.Algae and zooplankton were adversely affected by the soluble fraction of the runoff, while suspended solids caused high mortalities of rainbowtrout fry . In addition,. BOD 5 values similar to those reported in the storm water literature were measured; however, there were indications that results were influenced by toxicity to microbial populations.
Authors:
Portele,G., Mar,B. W., Horner,R. R., Welch,Eugene
Keywords:
Algae, Biochemical Oxygen, Biomass, control, Demand, fish, freeway, heavy metals, highway, highway runoff, impact, impacts, Interim, metals, population, runoff, stormwater, suspended solids, Toxicity, transport, Washington, Washington state, Water Pollutants, Washington State Monitoring, zooplankton
The impacts of storm water runoff from Washington State freeways on aquatic ecosystems were investigated through a series of bioassays utilizing algae, zooplankton and fish.Algae and zooplankton were adversely affected by the soluble fraction of the runoff, while suspended solids caused high mortalities of rainbowtrout fry . In addition,. BOD 5 values similar to those reported in the storm water literature were measured; however, there were indications that results were influenced by toxicity to microbial populations.
Authors:
Portele,G., Mar,B. W., Horner,R. R., Welch,Eugene
Keywords:
Algae, Biochemical Oxygen, Biomass, control, Demand, fish, freeway, heavy metals, highway, highway runoff, impact, impacts, Interim, metals, population, runoff, stormwater, suspended solids, Toxicity, transport, Washington, Washington state, Water Pollutants, Washington State Monitoring, zooplankton
|
|
| Jacobson,Robert | WA-RD 054.1 | Impacts of land use, changes on major highway facilities-Alternate approaches | 1982 |
Abstract:
In high growth areas, highways frequently become congested as the result of land use changes. Local use controls have not prevented the adverse impacts. Further, state funds are inadequate to address the critical problems in growth areas. This study investigates six study areas in Washington compare land use change impacts and the effectiveness of the various procedures applied to prevent or correct such problems and to fund highway improvements in growth areas. A survey of practice in other states provides information concerning their approaches to the problem. The study concludes that comprehensive land use planning supported by inter-agency cooperation has been ted. Local governments have applied a number of innovative techniques for financing local roads and streets. Cooperative interagency planning before growth is out of control has benefited both the local jurisdiction and the state. However, state and local jurisdictions lack the authority to apply these techniques to state highways in Washington State. The study makes recommendations for increasing interagency cooperation and for legislative remedies.
Authors:
Jacobson,Robert
Keywords:
control, effectiveness, facilities, highway, highway financing, Highways, impact, impacts, improvement, Interagency planning, land use, land use controls, land use planning, land-use, land-use/transportation planning, local government, mitigation, planning, planning coordination, Study, survey, Washington, Washington state
In high growth areas, highways frequently become congested as the result of land use changes. Local use controls have not prevented the adverse impacts. Further, state funds are inadequate to address the critical problems in growth areas. This study investigates six study areas in Washington compare land use change impacts and the effectiveness of the various procedures applied to prevent or correct such problems and to fund highway improvements in growth areas. A survey of practice in other states provides information concerning their approaches to the problem. The study concludes that comprehensive land use planning supported by inter-agency cooperation has been ted. Local governments have applied a number of innovative techniques for financing local roads and streets. Cooperative interagency planning before growth is out of control has benefited both the local jurisdiction and the state. However, state and local jurisdictions lack the authority to apply these techniques to state highways in Washington State. The study makes recommendations for increasing interagency cooperation and for legislative remedies.
Authors:
Jacobson,Robert
Keywords:
control, effectiveness, facilities, highway, highway financing, Highways, impact, impacts, improvement, Interagency planning, land use, land use controls, land use planning, land-use, land-use/transportation planning, local government, mitigation, planning, planning coordination, Study, survey, Washington, Washington state
|
|
| Horner,R. R. | WA-RD 039.15 | Impacts Of Channel Reconstruction In The Pilchuck River- Interim 917 | 1982 |
Abstract:
A five-year study was performed to compare conditions in the Pilchuck River before and after channel reconstruction associated with rerouting highway SR-2. The study focused on sediment particle-size analyses, benthic macroinvertebrates and fish. Substrates comparable le to control areas developedin all portions of the new channel within one year after construction. The available data on invertebrates and fish gave no indication of deterioration in diversity, quantity or size in the reconstructed channel. The report provides recommendations for further improvements in the design of stream channel changes should there be no alternative to their construction.
Authors:
Horner,R. R., Welch,Eugene B.
Keywords:
Alternative, Benthic Macroinvertabrates, accident rates, Channel, condition, construction, control, data, design, deterioration, fish, highway, impact, impacts, improvement, Interim, reconstruction, rivers, sediments
A five-year study was performed to compare conditions in the Pilchuck River before and after channel reconstruction associated with rerouting highway SR-2. The study focused on sediment particle-size analyses, benthic macroinvertebrates and fish. Substrates comparable le to control areas developedin all portions of the new channel within one year after construction. The available data on invertebrates and fish gave no indication of deterioration in diversity, quantity or size in the reconstructed channel. The report provides recommendations for further improvements in the design of stream channel changes should there be no alternative to their construction.
Authors:
Horner,R. R., Welch,Eugene B.
Keywords:
Alternative, Benthic Macroinvertabrates, accident rates, Channel, condition, construction, control, data, design, deterioration, fish, highway, impact, impacts, improvement, Interim, reconstruction, rivers, sediments
|
|
| Social and Econonomic Planning Section of the WA State Department of Highways | WA-RD 037.1A | Impact Of Highway Improvement On Property Values In Washington 933 | 1980 |
Abstract:
Transportation improvements of all kinds are being evaluated more carefully than ever during the planning stages. This attention to detail is well justified because the implications of such projects transcend the engineering disciplines and have environmental, social , and economic effects of major importance. In the economic area one of the impacts that is of great concern to the public i s the effect of a highway on property values. The purpose of this study is to measure the beneficial and adverse effects of limited- access highways on property values. A need exists in the State of Washington to have current data and analyses concerning this subject that apply specifically to this state . In addition there have been several theoretical developments that allow refinement of previous studies and validation of the results .OverviewThis study analyzed the beneficial effects of a highway on the values of surrounding properties by determining the real estate price trends in areas where a highway was constructed and comparing these trends with those in comparable areas which did not experience such changes. There were four residential areas utilized for parts of this study: Kingsgate east of Lake Washington on 1-405, north King County along 1-5 north of the Seattle city limits , Spokane near the east city limits along 1-90, and the southeast section of Puyallup along SR 512. Because of the lack of an adequate control area f o r the Spokane study, only the other three areas were used for the benefit estimation.
Authors:
Social and Econonomic Planning Section of the WA State Department of Highways
Keywords:
benefit, control, counties, data, development, environmental, highway, Highways, impact, impacts, improvement, planning, project, property values, public, seattle, transportation, Washington
Transportation improvements of all kinds are being evaluated more carefully than ever during the planning stages. This attention to detail is well justified because the implications of such projects transcend the engineering disciplines and have environmental, social , and economic effects of major importance. In the economic area one of the impacts that is of great concern to the public i s the effect of a highway on property values. The purpose of this study is to measure the beneficial and adverse effects of limited- access highways on property values. A need exists in the State of Washington to have current data and analyses concerning this subject that apply specifically to this state . In addition there have been several theoretical developments that allow refinement of previous studies and validation of the results .OverviewThis study analyzed the beneficial effects of a highway on the values of surrounding properties by determining the real estate price trends in areas where a highway was constructed and comparing these trends with those in comparable areas which did not experience such changes. There were four residential areas utilized for parts of this study: Kingsgate east of Lake Washington on 1-405, north King County along 1-5 north of the Seattle city limits , Spokane near the east city limits along 1-90, and the southeast section of Puyallup along SR 512. Because of the lack of an adequate control area f o r the Spokane study, only the other three areas were used for the benefit estimation.
Authors:
Social and Econonomic Planning Section of the WA State Department of Highways
Keywords:
benefit, control, counties, data, development, environmental, highway, Highways, impact, impacts, improvement, planning, project, property values, public, seattle, transportation, Washington
| Ryan,George F. | WA-RD 034.1 | Chemical Weed Control In Roadside Vegetation ON Highway Right Of Way 945 | 1978 |
Abstract:
Experiments were conducted at six locations to determine methods for eliminating or controlling existing weeds on highway rights-of-way prior to planting, and preventing weed infestations after planting, without injuring or interfering with normal growth and development of desirable plant material. Four experiments were conducted to determine herbicide programs for eliminating weeds in natural stands of (Arctostaphylos uva-ursi [L.] Sprang) and salal (Gaultheria shallon Pursh.) on highway rights-way, permitting these plants to form solid of uniform attractive vegetation.
Authors:
Ryan,George F., Rosenthal,Russell N., Berger,Robert L.
Keywords:
Chemical, control, development, highway, methods, program, Right-of-way, roadside, roadside vegetation, Roadside Vegitation, Weed Control
Experiments were conducted at six locations to determine methods for eliminating or controlling existing weeds on highway rights-of-way prior to planting, and preventing weed infestations after planting, without injuring or interfering with normal growth and development of desirable plant material. Four experiments were conducted to determine herbicide programs for eliminating weeds in natural stands of (Arctostaphylos uva-ursi [L.] Sprang) and salal (Gaultheria shallon Pursh.) on highway rights-way, permitting these plants to form solid of uniform attractive vegetation.
Authors:
Ryan,George F., Rosenthal,Russell N., Berger,Robert L.
Keywords:
Chemical, control, development, highway, methods, program, Right-of-way, roadside, roadside vegetation, Roadside Vegitation, Weed Control
|
|
| LaChapplle,E. R. | WA-RD 019.3 | Alternate Methods of Avalanche Control- Final Report | 1978 |
Abstract:
The Alternate Methods of Avalanche control project has been funded by the Washington State Highway Commission since August 1974 in order to develop simple, reliable and repeatable methods of triggering avalanche release which are free from the storage, handling and availability problems of explosives and artillery shells and which can be readily applied to avalanche paths typical to many smaller ones causing hazards for highways.The Alternate Methods of Avalanche Control project has been funded by the Washington State Highway Commission since August 1974 in order to develop simple, reliable and repeatable methods of triggering avalanche release which are free from the storage, and availability problems of explosives and artillery and which can readily be applied to avalanche paths typical of the many ones causing frequent hazards for highways. The research involved tests in both Washington and Colorado to permit evaluation of the control methods in diverse climates and snow conditions, leading to more generally applicable results than could be obtained at a single site. The technical and scientific aspects of the work in Colorado were coordinated by the San Juan Avalanche Project of the University of Colorado. Field work in Washington state and the general supervision of the program and the engineering design were carried out by the University of Washington Geophysics Program. The U.S. Forest Service at Utah, also joined in a cooperative test of our methods and equipment. This Final Report describes the tests and the results of the entire project.
Authors:
LaChapplle,E. R., Bell,D. B., Johnson,J. B., Lindsay,R. W., Sackett,E. M.
Keywords:
availability, avalanche, snow, weather, stress waves, condition, control, design, equipment, evaluation, hazard, highway, Highways, program, research, tests, Washington, Washington state
The Alternate Methods of Avalanche control project has been funded by the Washington State Highway Commission since August 1974 in order to develop simple, reliable and repeatable methods of triggering avalanche release which are free from the storage, handling and availability problems of explosives and artillery shells and which can be readily applied to avalanche paths typical to many smaller ones causing hazards for highways.The Alternate Methods of Avalanche Control project has been funded by the Washington State Highway Commission since August 1974 in order to develop simple, reliable and repeatable methods of triggering avalanche release which are free from the storage, and availability problems of explosives and artillery and which can readily be applied to avalanche paths typical of the many ones causing frequent hazards for highways. The research involved tests in both Washington and Colorado to permit evaluation of the control methods in diverse climates and snow conditions, leading to more generally applicable results than could be obtained at a single site. The technical and scientific aspects of the work in Colorado were coordinated by the San Juan Avalanche Project of the University of Colorado. Field work in Washington state and the general supervision of the program and the engineering design were carried out by the University of Washington Geophysics Program. The U.S. Forest Service at Utah, also joined in a cooperative test of our methods and equipment. This Final Report describes the tests and the results of the entire project.
Authors:
LaChapplle,E. R., Bell,D. B., Johnson,J. B., Lindsay,R. W., Sackett,E. M.
Keywords:
availability, avalanche, snow, weather, stress waves, condition, control, design, equipment, evaluation, hazard, highway, Highways, program, research, tests, Washington, Washington state
|
|
| Rosenthal,R. N. | WA-RD 014.2 | Vegetative Cover for Highway Rights Of Way HR-465 - Final Report April 1970-June, 1976 | 1976 |
Abstract:
A six year study of landscape plant establishment on roadsides as affected by a number of environmental conditions was initiated in April, 1970. The relationships between plant survival and soil texture, soil temperature, soil moisture, and exposure were evaluated. The affect of exposure on percent ground coverage of various grass species used in erosion control was also evaluated.
Authors:
Rosenthal,R. N.
Keywords:
condition, control, environmental, erosion, erosion control, exposure, highway, Landscape plant establishment, plant survival, roadside, soil, soil moisture, soil temperature, soil type, temperature
A six year study of landscape plant establishment on roadsides as affected by a number of environmental conditions was initiated in April, 1970. The relationships between plant survival and soil texture, soil temperature, soil moisture, and exposure were evaluated. The affect of exposure on percent ground coverage of various grass species used in erosion control was also evaluated.
Authors:
Rosenthal,R. N.
Keywords:
condition, control, environmental, erosion, erosion control, exposure, highway, Landscape plant establishment, plant survival, roadside, soil, soil moisture, soil temperature, soil type, temperature
|
|
| LaChapplle,E. R. | WA-RD 019.2 | Alternate Methods of Avalanche Control - Interim 1975-1976, Phase II | 1976 |
Abstract:
A collection of reports resulting from the second year's study. Reports are entitled:1. Air Bag System by E.R. LaChapelle, C.R. Morig and P.L. Taylor 2. Gas Exploder System by E.R. LaChapelle, C.R. Morig, and P.L. Taylor 3. Vibrator Tests by E.R. LaChapelle, C.R. Morig and P.L. Taylor 4. Mechanical Resonance of Snow by J.B. Johnson 5. Interface Modification Field Tests by E. R. LaChapelle 6. Approximate Solutions for the Interruption of the Creep and Glide of a snowpack by Rigid Structures by J.A. Langdon
Authors:
LaChapplle,E. R., Johnson,J. B., Langdon,J. A., Morig,C. R.
Keywords:
avalanche, snow, weather, creep, glide, control, field test, interim, structures, tests
A collection of reports resulting from the second year's study. Reports are entitled:1. Air Bag System by E.R. LaChapelle, C.R. Morig and P.L. Taylor 2. Gas Exploder System by E.R. LaChapelle, C.R. Morig, and P.L. Taylor 3. Vibrator Tests by E.R. LaChapelle, C.R. Morig and P.L. Taylor 4. Mechanical Resonance of Snow by J.B. Johnson 5. Interface Modification Field Tests by E. R. LaChapelle 6. Approximate Solutions for the Interruption of the Creep and Glide of a snowpack by Rigid Structures by J.A. Langdon
Authors:
LaChapplle,E. R., Johnson,J. B., Langdon,J. A., Morig,C. R.
Keywords:
avalanche, snow, weather, creep, glide, control, field test, interim, structures, tests
|
|
| Jacobson,R. | WA-RD 025.5 | Guidelines For Teams Scheduling and Management | 1975 |
Abstract:
The purpose of this document is to present an effective method by which the scheduling and coordination of the activities of interdisciplinary teams can be carried out. A number of more traditional techniques of project control have not met the unique requirements of scheduling and managing the activities of an inter-disciplinary team since the basic logic of task ordering is time sequentiality. Quite a number of the activities of inter-disciplinary team can be carried on simultaneously or at any time within the project's period. The system developed within this document uses the principal of "nested" descriptions of program activities and then proceeds to develop operational procedures. The role of the individual team members as well a the overall project development is described.
Authors:
Jacobson,R., Parker,R.
Keywords:
control, developed, development, management, program, project, scheduling
The purpose of this document is to present an effective method by which the scheduling and coordination of the activities of interdisciplinary teams can be carried out. A number of more traditional techniques of project control have not met the unique requirements of scheduling and managing the activities of an inter-disciplinary team since the basic logic of task ordering is time sequentiality. Quite a number of the activities of inter-disciplinary team can be carried on simultaneously or at any time within the project's period. The system developed within this document uses the principal of "nested" descriptions of program activities and then proceeds to develop operational procedures. The role of the individual team members as well a the overall project development is described.
Authors:
Jacobson,R., Parker,R.
Keywords:
control, developed, development, management, program, project, scheduling
|
|
| Brown,C. B. | WA-RD 019.1 | Alternative Methods of Avalanche Control - Interim 1974-1975 | 1975 |
Abstract:
A collection of reports resulting from the first year's study Alternate Methods of Avalanche Control. The reports are entitled:1. Air Bag System by E. R. LaChappelle and P.L. Taylor2. Gas Exploder System by E. R. LaChappelle and P. L. Taylor3. Snow Behavior Behind a Continuous Avalanche Defense Structure by J.A. Langdon.4. Interface Modification Field Tests by E. R. LaChappelle5. Mechanical Resonance of Snow by J. B. Johnson and R. J. Evans6. The 1974-75 Winter by M. B. Moore
Authors:
Brown,C. B., Evans,R. J., Johnson,B., Langdon,A., Moore,B., Taylor,L.
Keywords:
alternative, avalanche, avalanche forecasting, snow, weather, creep, glide, behavior, control, field test, interim, tests, winter
A collection of reports resulting from the first year's study Alternate Methods of Avalanche Control. The reports are entitled:1. Air Bag System by E. R. LaChappelle and P.L. Taylor2. Gas Exploder System by E. R. LaChappelle and P. L. Taylor3. Snow Behavior Behind a Continuous Avalanche Defense Structure by J.A. Langdon.4. Interface Modification Field Tests by E. R. LaChappelle5. Mechanical Resonance of Snow by J. B. Johnson and R. J. Evans6. The 1974-75 Winter by M. B. Moore
Authors:
Brown,C. B., Evans,R. J., Johnson,B., Langdon,A., Moore,B., Taylor,L.
Keywords:
alternative, avalanche, avalanche forecasting, snow, weather, creep, glide, behavior, control, field test, interim, tests, winter
|
|
| LaChapplle,E. R. | WA-RD 008.6 | Methods of Avalanche Control in Washington Mountain Highways | 1974 |
Abstract:
This Summary Report synthesizes the work on avalanche control carried out at the University of Washington from 1970 through 1974. Five problem areas are addressed: 1. Identification of avalanche paths. 2. Description of historical frequency and size of avalanches. 3 Prediction of avalanche. 4. Identification of control methods. 5. Inclusion of control and prediction schemes in highway design and operation.
Authors:
LaChapplle,E. R., Brown,C. B., Evans,R. J.
Keywords:
avalanche, snow, decisions, weather, vegetation, creep, glide, avalanche forecasting, control, design, highway, highway design, methods, prediction, Washington
This Summary Report synthesizes the work on avalanche control carried out at the University of Washington from 1970 through 1974. Five problem areas are addressed: 1. Identification of avalanche paths. 2. Description of historical frequency and size of avalanches. 3 Prediction of avalanche. 4. Identification of control methods. 5. Inclusion of control and prediction schemes in highway design and operation.
Authors:
LaChapplle,E. R., Brown,C. B., Evans,R. J.
Keywords:
avalanche, snow, decisions, weather, vegetation, creep, glide, avalanche forecasting, control, design, highway, highway design, methods, prediction, Washington
|
|
| Rosenthal,Russell N. | WA-RD 014.1 | Vegetative Cover For Highway Rights Of Way - Interim Report April 1970-July, 1973 996 | 1973 |
Abstract:
A four year study of landscape plant establishment as affected by a number of environmental conditions was initiated in April, 1970. The relationship between plant survival and soil texture, soil temperature and exposure were evaluated. The affect of exposure on percent ground coverage of various grass species used in erosion control was also evaluated.
Authors:
Rosenthal,Russell N.
Keywords:
condition, control, environmental, erosion, erosion control, exposure, highway, Landscape plant establishment, plant survival, soil, soil temperature, soil type, temperature
A four year study of landscape plant establishment as affected by a number of environmental conditions was initiated in April, 1970. The relationship between plant survival and soil texture, soil temperature and exposure were evaluated. The affect of exposure on percent ground coverage of various grass species used in erosion control was also evaluated.
Authors:
Rosenthal,Russell N.
Keywords:
condition, control, environmental, erosion, erosion control, exposure, highway, Landscape plant establishment, plant survival, soil, soil temperature, soil type, temperature
| Rossana,T. A. | WA-RD 004.1 | Evergreen Point Bridge Toll Booth Ventilation Study 1006 | 1972 |
Abstract:
At the request of the Washington Department of Highways a comprehensive study was conducted of the exposures of toll collectors to carbon monoxide at the Evergreen Point Bridge spanning Lake Washington between Seattle and Bellevue.The first phase of the study consisted of designing, installing and operating an automatic, continuous carbon monoxide monitoring system to establish typical air quality patterns in and around the toll booths.the second phase consisted of developing a prototype toll booth positive ventilation system. Air, which is introduced through a vertical diffuser situated at one wall of the booth, travels horizontally across the booth and out the door. Parametric studies of sources and rates of ventilation air, diffuser design and other toll booth modifications were conducted in the laboratory. Subsequently these modifications were installed and investigated at an operating booth at the toll plaza. Concentrations of carbon monoxide in the collectors breathing zone were reduced to acceptable levels. Methodologies and results of these systems are described, and design recommendations for the control system are offered.
Authors:
Rossana,T. A., Hall,F. A.
Keywords:
air quality, bridge, carbon monoxide, Concentrations, control, design, exposure, highway, Highways, methodology, monitoring, Operating, quality, seattle, System, systems, travel, Washington
At the request of the Washington Department of Highways a comprehensive study was conducted of the exposures of toll collectors to carbon monoxide at the Evergreen Point Bridge spanning Lake Washington between Seattle and Bellevue.The first phase of the study consisted of designing, installing and operating an automatic, continuous carbon monoxide monitoring system to establish typical air quality patterns in and around the toll booths.the second phase consisted of developing a prototype toll booth positive ventilation system. Air, which is introduced through a vertical diffuser situated at one wall of the booth, travels horizontally across the booth and out the door. Parametric studies of sources and rates of ventilation air, diffuser design and other toll booth modifications were conducted in the laboratory. Subsequently these modifications were installed and investigated at an operating booth at the toll plaza. Concentrations of carbon monoxide in the collectors breathing zone were reduced to acceptable levels. Methodologies and results of these systems are described, and design recommendations for the control system are offered.
Authors:
Rossana,T. A., Hall,F. A.
Keywords:
air quality, bridge, carbon monoxide, Concentrations, control, design, exposure, highway, Highways, methodology, monitoring, Operating, quality, seattle, System, systems, travel, Washington
|
|
| LaChapplle,E. R. | WA-RD 008.3 | Methods Of Avalanche Control On Washington State Highways - Second Annual Report 1007 | 1972 |
Abstract:
An interim report of the second year of a three-year study of avalanche hazards along Washington mountain highways is presented. Applicable snow, avalanche and weather data for 1971-72 are given. Also included is a theoretical treatment o f the stress analysis of slab avalanches and a bibliography of snow clearing technology.
Authors:
LaChapplle,E. R., Brown,C. B., Evans,R. J.
Keywords:
analysis, Annual, avalanche, Avalanche control, Washington mountain highways, Snow and weather data, Snow clearing technology, Avalanches, control, data, hazard, highway, Highways, Interim, methods, snow, stresses, Study, technology, Washington, Washington state
An interim report of the second year of a three-year study of avalanche hazards along Washington mountain highways is presented. Applicable snow, avalanche and weather data for 1971-72 are given. Also included is a theoretical treatment o f the stress analysis of slab avalanches and a bibliography of snow clearing technology.
Authors:
LaChapplle,E. R., Brown,C. B., Evans,R. J.
Keywords:
analysis, Annual, avalanche, Avalanche control, Washington mountain highways, Snow and weather data, Snow clearing technology, Avalanches, control, data, hazard, highway, Highways, Interim, methods, snow, stresses, Study, technology, Washington, Washington state
|
|
| Hou,Cheng-Yeh | WA-RD 001.1 | Aerotriangulation Analysis and Control Point Error Detection | 1972 |
Abstract:
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix.
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, analysis, computer, control, data, detection, error detection, program, Standard error, solar altitude, linear transformation, strip adjustment, aerotriangulation, deflection of vertical, refraction in precise leveling, second term, double summation, image motion, film distortion, flight height, survey
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix.
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, analysis, computer, control, data, detection, error detection, program, Standard error, solar altitude, linear transformation, strip adjustment, aerotriangulation, deflection of vertical, refraction in precise leveling, second term, double summation, image motion, film distortion, flight height, survey
|
|
| Hou,Cheng-Yeh | WA-RD 001.1A | Aerotriangulation Analysis and Contrl Point Error Detection - Executive Summary | 1972 |
Abstract:
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, Aerotriangulation, analysis, analysis and control, computer, control, data, detection, Error, error detection, Executive, program, survey
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, Aerotriangulation, analysis, analysis and control, computer, control, data, detection, Error, error detection, Executive, program, survey
|
|
| Hou,Cheng-Yeh | WA-RD 001 | Aerotriangulation Analysis and Control Point Error Detection | 1972 |
Abstract:
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix.
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, analysis, computer, control, data, detection, error detection, program, Standard error, solar altitude, linear transformation, strip adjustment, aerotriangulation, deflection of vertical, refraction in precise leveling, second term, double summation, image motion, film distortion, flight height, survey
A major problem faced by personnel responsible for manipulating aerotriangulation data through transformation and adjustment programs in an electronic computer is that of isolating and detecting blunders and other erroneous data. This study created an automated data analysis and rejection program to reduce the turn around time from initial entry to certification of the final adjustment. Parameters for establishing the smallest detectable errors for rejection were determined by analyses of error sources in ground control surveys, aerial photography, and aerotriangulation theory and operations. Some seldom considered theorectical and practical error sources in ground control surveys are discussed and resolved. The data rejection program chart is listed in the appendix.
Authors:
Hou,Cheng-Yeh
Keywords:
aerial photography, analysis, computer, control, data, detection, error detection, program, Standard error, solar altitude, linear transformation, strip adjustment, aerotriangulation, deflection of vertical, refraction in precise leveling, second term, double summation, image motion, film distortion, flight height, survey
|
|
| Foss,Rene N. | WA-RD 005.1 | Vehicle Noise Study Final Report Prepard for Washington State Highway Commission Department of Highways 1015 | 1972 |
Abstract:
This study was made to obtain information on the noise levels being emitted by vehicles currently using the highways of the State of Washington. The Washington State Highway Commission requested this study for guidance in proposing vehicle noise control legislation. The main controversy in states with existing comprehensive vehicle noise legislation has concerned trucks traveling on roads with posted speeds above 35 mph. The main thrust of our study is therefore concerned with this particular area, although data were also taken on automobiles and on roads posted at less than 35 mph. This study is unique in that the noise level - and the speed of all vehicles were measured. In addition, all trucks over 10,000 lb were weighed. Our large body of data has been graphed in numerous ways to illustrate various aspects--including how the noise factor varies with speed, weight, and percentage of full load, etc. Some photographs of the trucks together with their noise data a real so included.
Authors:
Foss,Rene N.
Keywords:
control, data, highway, Highways, noise, Noise Levels, speed, Study, truck, trucks, vehicle noise, Washington, Washington state, weight
This study was made to obtain information on the noise levels being emitted by vehicles currently using the highways of the State of Washington. The Washington State Highway Commission requested this study for guidance in proposing vehicle noise control legislation. The main controversy in states with existing comprehensive vehicle noise legislation has concerned trucks traveling on roads with posted speeds above 35 mph. The main thrust of our study is therefore concerned with this particular area, although data were also taken on automobiles and on roads posted at less than 35 mph. This study is unique in that the noise level - and the speed of all vehicles were measured. In addition, all trucks over 10,000 lb were weighed. Our large body of data has been graphed in numerous ways to illustrate various aspects--including how the noise factor varies with speed, weight, and percentage of full load, etc. Some photographs of the trucks together with their noise data a real so included.
Authors:
Foss,Rene N.
Keywords:
control, data, highway, Highways, noise, Noise Levels, speed, Study, truck, trucks, vehicle noise, Washington, Washington state, weight
|
|
| LaChapplle,E. R. | WA-RD 008.2 | North Cascade Highway SR 20 Avalanche Atlas 1019 | 1971 |
Abstract:
This Avalanche Atlas catalogs details of snow avalanche activity along the North Cascades Highway, SR-20, between Newhalem on the west side of the Cascade Mountains and Mazama on the east side. Data contained herein have been collected during summer and winter reconnaissances in 1970 and 1971 under contract between the Washington State Highway Department and the University of Washington. Compilation of this Atlas completes the first phase of a planned three-year study of avalanche problems and control methods on the highways of the State of Washington.
Authors:
LaChapplle,E. R.
Keywords:
Atlas, avalanche, Cascade, control, data, highway, Highways, methods, North, North Cascade, snow, SR 20, Study, Washington, Washington state, winter
This Avalanche Atlas catalogs details of snow avalanche activity along the North Cascades Highway, SR-20, between Newhalem on the west side of the Cascade Mountains and Mazama on the east side. Data contained herein have been collected during summer and winter reconnaissances in 1970 and 1971 under contract between the Washington State Highway Department and the University of Washington. Compilation of this Atlas completes the first phase of a planned three-year study of avalanche problems and control methods on the highways of the State of Washington.
Authors:
LaChapplle,E. R.
Keywords:
Atlas, avalanche, Cascade, control, data, highway, Highways, methods, North, North Cascade, snow, SR 20, Study, Washington, Washington state, winter
|
|
| Sylvester,R. O. | WA-RD 027.1 | A Study Of Wastewater Handling, Holding and Disposal From Washington State Ferries 953 |
Abstract:
Alternatives to control wastewater odors on board Washington State ferries and during discharge of the wastewater to sewerage systems were formulated, evaluated and tested.Holding tank aeration, using compressed air injection to a recycle line is an effective method. Sulfide is microbially oxidized, and anaerobic sulfate reducing bacteria are suppressed. Engineering and lab studies and a simulation model of the process were used to estimate suitable design parameters and costs. A prototype installation is recommended for optimization of operation. The addition of slug dosages of H202 was also found to be effective in laboratory and on-board vessels. The twice daily dose of about 50 mg/ should be stirred into the holding tank using recycle mixing. Peroxide was found to oxidize sulfide, increase dissolved oxygen and suppress sulfate reducing bacteria. Bottom suction sludge hoppers must be installed to prevent accumulation of sludge in tank bottom.Other alternatives, including chlorine addition, pH increase, iron sulfide precipitation and toxic odor control compounds, were found ineffective and/or uneconomic.Other finds are that sulfide is produced primarily from reduction of sulfates from the saltwater flushing water. Production is primarily in the slime layer on the bottom and sides of the holding tanks. On-shore force mains are sites of sulfide production during stagnant periods between tank pumpouts. These force mains should tanks was evaluated for hydraulic, organic loading, and salt toxicity effects on existing and planned sewage plants. No significant impacts were found.
Authors:
Sylvester,R. O., Ferguson,J. F., Parish,K. B., Brown,D. W., Leuelid,S.
Keywords:
control, cost, costs, design, disposal, dissolved oxygen, effects, ferries, ferry, impact, impacts, line, Marine wastewater holding tanks, odor control, wastewater aeration, hydrogen peroxide, model, Precipitation, salt, sewerage, Study, System, systems, Toxicity, vessel, vessels, Washington, Washington state
Alternatives to control wastewater odors on board Washington State ferries and during discharge of the wastewater to sewerage systems were formulated, evaluated and tested.Holding tank aeration, using compressed air injection to a recycle line is an effective method. Sulfide is microbially oxidized, and anaerobic sulfate reducing bacteria are suppressed. Engineering and lab studies and a simulation model of the process were used to estimate suitable design parameters and costs. A prototype installation is recommended for optimization of operation. The addition of slug dosages of H202 was also found to be effective in laboratory and on-board vessels. The twice daily dose of about 50 mg/ should be stirred into the holding tank using recycle mixing. Peroxide was found to oxidize sulfide, increase dissolved oxygen and suppress sulfate reducing bacteria. Bottom suction sludge hoppers must be installed to prevent accumulation of sludge in tank bottom.Other alternatives, including chlorine addition, pH increase, iron sulfide precipitation and toxic odor control compounds, were found ineffective and/or uneconomic.Other finds are that sulfide is produced primarily from reduction of sulfates from the saltwater flushing water. Production is primarily in the slime layer on the bottom and sides of the holding tanks. On-shore force mains are sites of sulfide production during stagnant periods between tank pumpouts. These force mains should tanks was evaluated for hydraulic, organic loading, and salt toxicity effects on existing and planned sewage plants. No significant impacts were found.
Authors:
Sylvester,R. O., Ferguson,J. F., Parish,K. B., Brown,D. W., Leuelid,S.
Keywords:
control, cost, costs, design, disposal, dissolved oxygen, effects, ferries, ferry, impact, impacts, line, Marine wastewater holding tanks, odor control, wastewater aeration, hydrogen peroxide, model, Precipitation, salt, sewerage, Study, System, systems, Toxicity, vessel, vessels, Washington, Washington state
|
|
| Previous | Next |
Search
Common Keywords:
- accident rates
- research
- Washington
- Washington state
- data
- pavement
- highway
- transportation
- design
- bridge
- evaluation
- construction
- performance
- condition
- program
- concrete
- traffic
- traffic surveillance and control
- analysis
- development
- WSDOT
- project
- asphalt
- control
- System
- Study
- cost
- ITS
- systems
- truck
- bridge and construction
- developed
- overlay
- volume
- HOV
- computer
- experimental
- environmental
- earthquake
- pavement management
- transportation planning
- planning
- impact
- survey
- asphalt concrete
- materials
- speed
- Highways
- maintenance
- management
- bridges
- tests
- tire
- marine
- bridge deck
- temperature
- methods
- impacts
- quality
- seattle
- asphalt pavement
- noise
- costs
- highway runoff
- high occupancy vehicle
- land use
- fatigue
- pavements
- incident management
- monitoring
- model
- transit
- agencies
- overlays
- roadway
- snow
- public
- TRB
- effectiveness
- policy
- weight
- reinforced concrete
- methodology
- facilities
- avalanche
- benefit
- loads
- prediction
- Interim
- base
- ramp metering
- cracking
- runoff
- models
- statistics
- Miscellaneous Library
- behavior